• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.5
• /
• pp.68-75
• /
• 1996

The vacuum drying characteristics of water-saturated porous media were studied experimentally. The water-saturated porous media, water-saturated sand layer, was heated by the isothermal bottom wall of the rectangular vessel. The vacuum drying rate and temperature distribution of the sand layer were measured and calculated under a variety of conditions of heated wall temperature, vacuum rate, and thickness of the test material. It was found that the drying rate due to the heat and mass teansfer is greatly influenced by the heated wall temperature, vacuum rate, and thickness of the test material.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.51-58
• /
• 2020

As interest in lunar exploration increases, studies on lunar surface environment simulation including a lunar soil simulant are being conducted. One of the problems when creating a vacuum environment with lunar soil is that it takes long time to reach high vacuum due to outgas from the soil. Most of the outgas is water, and the time to reach high vacuum can be significantly reduced by a pretreatment process that removes moisture adhering to the surface of the lunar soil before putting soil into a vacuum chamber. The existing soil drying methods were examined to determine how these methods were effective to remove moisture from the lunar simulant soil. Drying experiments of lunar soil samples were carried out using a dry oven, a microwave oven, direct heating method and a vacuum oven, and the results of the drying experiment were presented. Drying soil at 110℃ using a dry oven and drying soil by a microwave oven were not enough to remove moisture, and vacuum oven drying method and direct heating drying method at more than 200℃ were effective in water removal.

• Culinary science and hospitality research
• /
• v.14 no.1
• /
• pp.144-151
• /
• 2008

This study investigated the changes in the contents of allicin and diallyl disulfide and in the alliinase activity during the vacuum freeze drying of onion samples treated as the whole, sliced and crushed forms. The contents of allicin and diallyl disulfide in raw onions were 26.40ppm and 2.78ppm respectively. The contents of allicin and diallyl disulfide of onion samples treated as the whole, sliced and crushed forms increased with the progress of vacuum freeze drying. The degree of increase was different in each onion sample form prepared by vacuum freeze drying(p<0.05). The specific activity of alliinase in raw onions was 7.536 units/mg protein. The activity in onion samples treated as the whole, sliced and crushed forms decreased with the progress of vacuum freeze drying. The activity in the whole onion prepared by the vacuum freeze drying for 8 hrs reduced to 5.516 units/mg protein with 73.2% remaining and to 3.304 units/mg protein with 43.8% remaining for 36 hrs. The activity in the sliced onion prepared by the vacuum freeze drying for 36 hrs reduced to 2.366 units/mg protein with 31.4% remaining and the activity in the crushed onion prepared by the vacuum freeze drying for 36 hrs reduced to 2.232 units/mg protein with 29.6% remaining. The alliinase in onion sample treated as the whole form showed the highest remaining activity during the vacuum freeze drying.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.106-117
• /
• 2018

The present study was carried out to find a suitable drying method for the determination of non-evaporable water in hydraulic inorganic materials. In Part 1 of the paper, the case ordinary Portland cement was discussed and, in this Part 2, the case of alkali active slag (AAS) was investigated. Various drying methods including vacuum and oven drying, and an ignition, were used for the AAS system having different w/b, types and amounts of alkali activators. It was found that a combination of the vacuum and oven drying was a suitable drying method for the AAS case. Although a part of the crystallized water in hydration products was decomposed, but the free and adsorbed water could be completely evaporated and the deviation of the results was small.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.4
• /
• pp.25-32
• /
• 2001

A microwave vacuum (MW/V) dryer was developed for drying short roundwoods, from which woodcraft souvenirs in Korean market are mostly made, and which were hardly dried without defects in a conventional kiln. It consisted of three 1.5 kW magnetrons of 2,450 MHz, a vacuum pump, a load cell of 100 kg and a cavity of $580{\times}580{\times}1,360\;mm^3$. A computer program was developed to switch on or off the magnetrons according to drying schedules, those were based on microwave injection time or the average of wood temperatures. To evaluate the new MW/V dryer the roundwood specimens of rigida pine, poplar and birch were dried. Their log diameters and lengths ranged from 125 to 25 em and from 25 to 50 cm, respectively. In spite of the presence of minor drying defects, the MW/V drying is found to be an effective method for drying short roundwoods. Wooden turneries made of red alder and ash logs were also MW/V dried from green to 4%MC without any degradation. The rates of the MW/V drying were examined for three different lengths of poplar logs.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.128-137
• /
• 1999

In this study, shiitake mushrooms were dried by hot air, vacuum and freeze drying methods and theire physical properties were compared. Since the pore size affects the amount of absorption, the characteristics of water sorption were investigated at various humidities and temperatures. Results showed that the freeze dried product had the greatest pore area and the highest absorption capacity. However, all the dried samples showed similar quality. The browning degrees were severely changed with increased relative humidities and temperatures. Among these drying methods, the freeze drying gave the greatest change in browning degree. The GAB monolayer moisture contents of the dried shiitake mushroom were $5.3{\sim}7.7%$. The prediction model was also provided using parameters such as relative humidity, temperature and pore area.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.1-8
• /
• 2001

Red pine (Pinus densiflora), white pine (Pinus koraiensis), larch (Larix leptolepis) and Western hemlock (Tsuga heterophylla) lumber were vacuum-press dried under three drying schedules to investigate current moisture contents (MC), drying rates and drying time factors related to five lumber thicknesses of 3, 5, 7, 9 and 11cm. Current MC could be estimated by drying factors such as lumber thickness, initial Me and drying time. Average drying rate from 30% to 15% Me was the highest for Western hemlock below fiber satuartion point, red pine, white pine and larch in the order of their magnitude. Drying rate curvilinearly decreased as lumber thickness increased. Drying time factor curvilinearly increased as lumber thickness increased.

• Food Engineering Progress
• /
• v.13 no.2
• /
• pp.105-109
• /
• 2009

The effects of drying methods on the physicochemical properties of Salicornia herbacea powder were investigated. Samples prepared by freeze drying showed a significantly higher L$^{*}$-value but lower a$^{*}$-value as compared with those prepared by hot-air drying and vacuum drying (p<0.05). Scanning electron micrograph revealed that freeze drying produced more orderly and denser samples than did vacuum and hot-air drying. Water solubility of the freeze-dried sample was significantly higher than those of the other methods while swelling ratio of the same sample was significantly lower than those of others (p<0.05). Freeze-dried Salicornia herbacea powder contained significantly higher amounts of total sugar and reducing sugar as compared to the other samples (p<0.05).

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.516-521
• /
• 2004

The study was intended to develop a yam snack to increase the consumption and the added value of the yam which has many kinds of medicinal effects and functions. Moisture content of a freeze-drying yam snack was higher than those of hot wind drying and vacuum drying yam snack. However, carbohydrate content was opposed to it. The content of soluble proteins in freeze drying yam snack was 6.43 mg/100g, and lower than that those in hot wind drying and vacuum drying yam snack. The contents of total sugar and reducing sugar were not noticeably different by processing methods. The major organic acids of yam snack were malic, acetic, acids, and acetic acid. Citric acid were rich contented in hot wind and vacuum dried yam snack, but the content of malic acid in freeze dried yam snack was higher than those in hot wind and vacuum dried yam snack. The contents of the amino acids and total amino acids showed the highest contents in vacuum dried snack and the next came in hot wind dried snack and freeze dried snack order. The content of free amino acids were not different by processing methods. Total content of vitamin C were not different by processing methods, but a ascorbic acid was higher in freeze dried yam snack than those in other. The dehydroascorbic acid contents of the hot-air and vacuum dried snack was higher than those of the freeze dried snack, Potassium, sodium and magnesium were the main minerals of the yam snacks.

• 전기의세계
• /
• v.14 no.3
• /
• pp.37-40
• /
• 1965

전기기구의 절연성을 향상시킨다는 것은 품질이나 수명을 향상시키는것과 똑같은 의의를 갖는 것이며, 따라서 기기의 수명은 절연성에 있다해도 과언이 아니다. 절연내력을 높이기 위해서는 질량의 절연재료와 고도의 절연가공기술 및 절연구조의 개량등의 요건을 필요로 하나 건조 처리기술에 의하여도 상당히 전기특성을 회복시킬수 있다. 주지의 사항과 같이 건조 처리법에는 열풍건조법, 열유(분무 및 순환) 건조법증기건조법, 전류건조(냉상전류법 및 단락순환건조법)법, 등등에 진공건조를 병용한 처리법이 있으며 어떤나라의 전력계통에서도 계통의 감시 또는 정기보수시 전력용 변압기를 건조(현지)해야 되는 작업은 기기 maker에서 공장건조해야 되는것과 똑같이 거쳐야 하는 공정중의 하나인 것이다. 여기서 언급코져 하는 변압기 tank 유도가열법은 본인이 일본 삼릉전기에서 연수중 조사한 바 있는것으로서 소련, 일본등지에서는 벌써부터 타 건조처리법과 병용해서 척용하고 있으며, 보유하고 있는 건조실의 size가 적을때나 또는 수송 제한조건때문에 현지 조립을 요하는 지역에서는 편리한 처리법의 하나라 할 수 있다. 이하 그 설계 계산법과 설계예를 간략한다.