Kim, Hyeong-Uk;Kim, Min-Gyun;Im, Cha-Yong;Gang, Seok-Bong
Proceedings of the Materials Research Society of Korea Conference
/
2009.11a
/
pp.43.2-43.2
/
2009
Al-Mg 알루미늄 합금은 강도가 높고 성형성이 우수하여 수송기기 경량화용 소재로서 사용량이 증가하고 있다. 특히고강도 특성을 보이는 Al-Mg-Mn합금은 자동차, 선박및 철도차량등의 형재 및 판재로 그 사용량이 증가하고 있다. 또한 결정립을 미세화 시킨 Al-Mg-Mn합금판재의 경우에는 온간성형으로 복잡한 형상의 판재부품제조에 사용되고 있다. 연속주조공정인 Twin roll strip casting(TRC)은용탕으로부터 직접 판재를 생산할 수 있는 공정으로 주로 순알루미늄계열의 판재 생산에 사용되고 있으나 최근에는 고강도 판재의 저비용 생산을 위하여 고합금계 판재에 적용하는 연구가 수행되고 있다. 합금량이 높은 고강도Al-Mg계 합금의 TRC 주조시 고액공존구간이 커서 더욱 정밀한 공정제어가 필요하다. 또한 기존의 슬라브주조방식보다 높은 냉각속도로 주조가 가능하기 때문에 결정립 및 정출상의 미세화공정으로 응용되기도한다. 본 연구에서는 TRC공정을 기초로 주조시 열간 압연의효과를 동시에 부여하는 용탕직접압연공정을 개발하였으며 상용 고강도 알루미늄 합금인 5083합금 판재를제조하였다. 또한 기존 Al-Mg 합금에 Mn을 첨가하여 용탕직접압연함으로서 정출상의 크기 및 밀도를 제어하여 강도가 우수한 Al-Mg-Mn 합금판재를 제조하는 기술을 개발하였다. 용탕직접압연된 Al-Mg-Mn계 합금의 경우에 주조시 높은 냉각속도로 인하여 결정립이 미세하고 Al6Mn과 같은 미세한 정출상이 다량 형성되었으며, 최종압연 및 열처리에 의하여 높은 강도를 갖는 고강도 알루미늄 합금 판재의 제조가 가능하였다.
Transactions of the Korean Society of Mechanical Engineers A
/
v.37
no.4
/
pp.475-481
/
2013
The control system of a direct drive servo valve is a nonlinear system, and the flow force effect on the spool motion is significant and dependent on the load pressure. To satisfy the control system design requirements, the optimal parameters of the lead-lag controller and the derivative feedback controller are searched for using a genetic algorithm and a complex constrained direct search type method. The obtained controller parameters successfully perform their role to satisfy the control system design requirements.
Proceedings of the Korea Water Resources Association Conference
/
2009.05a
/
pp.203-207
/
2009
Neyman-Scott Rectangular Pulse 모형(NSRPM)은 Poisson process에 기초를 둔 모형으로 수자원분야에서는 강수자료를 생성하는데 널리 쓰이고 있다. NSRPM을 구축하기 위해서는 기존에 관측된 강수 자료를 이용하여 NSRPM의 매개변수를 추정하여야 한다. NSRPM의 매개변수를 추정 시 강수자료의 모멘트와 매개변수로 구성된 모멘트식을 비교하여 매개변수를 추정한다. 기존에 사용된 모멘트를 이용한 NSRPM의 매개변수 추정방법의 경우 매개변수로 구성된 모멘트식을 증명하여야지만 NSRPM의 매개변수를 추정할 수 있다. 또한 증명된 모멘트식이 없는 모멘트 값의 경우 매개변수 추정 시 사용하지 못하는 단점이 있다. 이런 한계점으로 인하여 NSRPM 의 수정 및 추정이 어려워 NSRPM은 널리 사용되지 못하고 있다. 본 연구에서는 매개변수 추정방법의 따른 한계점을 극복하고자 직접적인 매개변수 추정방법을 제안하였다. 직접적인 매개변수 추정방법은 모멘트 식을 이용하지 않고 생성된 자료를 이용하여 직접적으로 매개변수를 추정하는 방법이다. 본 연구의 대상지점은 금강유역의 대전으로 선정하였으며, 사용된 자료는 기상청에서 운영하는 대전 지상관측소 강수자료를 사용하였다. 총 39년의 자료를 이용하여 각 방법을 이용하여 매개변수를 추정하였다. 실험결과 직접적인 추정방법이 기존 매개변수 추정방법보다 더 정확한 매개변수를 추정하는 것을 확인 할 수 있었다.
The Journal of the Korea institute of electronic communication sciences
/
v.7
no.5
/
pp.1213-1219
/
2012
As Korea is expected to enter an aging society in near future, the number of patients who need a long-term prescribtion is expected to increase as well. In particular, Korea shows the highest in both the incident rate and the death rate among OECD member nations. The current situation requires more strict monitoring and management for patients' taking medicine, there are a few practical problems such as personnel expenses. Recently the concept of directly observed treatment (DOT) that is based on the IT technologies has been introduced. This paper, therefore, proposes a digital DOT system with a smart pillbox and drives key requirements for the smart pillbox that plays an important and essential role in the proposed digital DOT system.
Journal of the Korea Institute of Information and Communication Engineering
/
v.19
no.12
/
pp.2800-2804
/
2015
Recently, device-to-device (D2D) direct communication is attracting much interest and many researches have been conducted. In this paper, we investigated an algorithm to support the D2D direct communication in cellular mobile communication networks. We investigated the optimal D2D scheduling algorithm which can achieve the maximal sum-rate in cellular uplink frequency. We also proposed a simple scheduling algorithm which can considerably reduce the computational complexity, compared to the optimal scheme. Finally, we analyzed the performance of the proposed scheme based on computer simulations.
The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.10
no.2
/
pp.45-53
/
1996
평균조도 계산법 중에서 국내에서 주로 사용되는 3배광법과 ZCM의 정확도를 비교하고, 그 적용한계를 파악하였다. 비교방법은 전반확산형 조명기구와 직접식 조명기구에 대하여 3배광법과 ZCM에 의한 조명률을 계산하고, 이 값들을 이용하여 여러 상황하에서의 평균조도를 계산하였다. 몬테카를로 시뮬레이션으로 동일상황에서의 조도값을 구하고, 이 값과 3배광법과 ZCM의 조도값을 각각 비교하였다. MCS법의 정확도는 Moon위 해석적인 방법과 비교하여 입증하였다. 연구결과는 다음과 같다. 1. 방의 크기에 따른 평균조도 비교에서 전반확 형 조명기구와 직접식 조명기구의 경우 3배광법 보다 ZCM이 평균조도 오차가 적었다. 2. 광원의 수 변화에 따른 평균조도 비교에서 직접식 조명기구의 경우 3배광법은 광원의 수가 증가할수록 평균조도 오차가 감소하다가 다시 증가하였고 ZCM 은 점차적으로 감소하였다. 3. 실내면 반사율 변화에 따른 비교에서 직접식 조명기구의 경우 오차 범의가 3배광법에서 크고 ZCM에서 적게 나타냈다. 4. 방의 형태 변화에 따른 평균조도 비교에서 직접식 조명기구의 경우 방의 폭이 좁고 길이가 긴 공간에서 3배광법과 ZCM모두 오차가 크게 낱났다. 또 정방형에서 가까울수록 오차는 작아지면서 3배광법 보다 ZCM의 오차가 적었다. 그러므로 우리나라에서 혼용되고 있는 3배광법과 ZCM중에서 정확도가 높은 ZCM선택이 바람직하다.
Proceedings of the Korean DIstribution Association Conference
/
2006.08a
/
pp.21-46
/
2006
본 연구에서는 인터넷 쇼핑몰에서 불만족을 경험한 고객들의 불평요인 및 불평행동유형을 파악하고, 쇼핑몰 업체의 불평처리방법에 대한 평가를 바탕으로 효과적인 불평처리방안을 제시하였다. 연구 결과 불평행동을 하는 고객의 유형은 직접행동파, 사적행동파, 소극행동파, 적극행동파 등으로 구분되었다. 이 가운데 사적행동파가 가장 높게 나타나 인터넷 환경에서는 사적행동파에 대한 효과적인 불평처리 방안에 관한 노력이 가장 필요한 것으로 확인되었다. 직접행동파는 해당 쇼핑몰 업체에게 직접 문제해결을 요구하기 때문에 불평처리에 대한 공정성, 불평 후 만족과 충성도 측면에서 가장 효과적인 것으로 확인되었다. 그리고 고객의 모든 불평행동유형에서 가장 심각한 불만족 요인으로는 배송오류 및 지연과 제품결함인 것으로 확인되었지만, 사적행동파와 소극행동파는 부정확한 정보제공과 과장광고 등을 심각하게 생각하고 있었다. 인터넷 쇼핑몰 업체는 불평고객들의 불평해결을 위해 직접적인 접촉을 할 경우 가장 효과적인 불평처리를 할 수 있기 때문에 사적행동파와 소극행동파의 불평행동을 유발하기 위한 노력이 필요하다. 또한 쇼핑몰 관리자의 불친절 및 반응은 심각한 불만족 요인은 아니지만, 배송오류 및 지연과 제품결함과 같은 심각한 불만족요인에 대해서는 직접적인 사과 및 쇼핑몰 관리자의 친절한 태도를 포함하여 현금 환불 등 불평처리를 해야 한다. 그리고 고객의 관점에서 인터넷 쇼핑몰을 보다 편리하고 유용하게 설계할 필요가 있다.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.21
no.8
/
pp.81-86
/
2007
This paper proposes the scheme to improve the current direct load control(DLC) program by inspecting the problems of the DLC program. In order to increase the number of the customers participating DLC program, a reduction of the base incentive and an increase of the direct load control incentive are suggested based on the interruption cost of electric power considering the characteristics of load types and the introduction of demand side bidding is recommended. Secondly, the standards of power system operations is required to control DLC program efficiently for the penalty, interruption times, the number of interrupting loads, notice time for the load interruption and the periods of the DLC program contract.
The Transactions of the Korean Institute of Power Electronics
/
v.13
no.3
/
pp.179-185
/
2008
In this paper, an advanced torque control scheme of SRM using DITC(Direct Instantaneous Torque Control) and PWM(pulse width modulation) is presented. Different from conventional DITC method, proposed method uses one or two switching modes at every sampling time, instead of only one switching mode. The duty ratio of the phase switch is regulated according to the torque error and simple control rules of DITC. Moreover the sampling time of control can be extended, which allows implementation on low cost micro-controllers. A simple calculation of PWM can assure a constant switching frequency with an excellent control performance. The proposed control method is verified by the simulations and experimental results.
Kim, Jong-Gun;Lim, Kyoung-Jae;Park, Youn-Shik;Heo, Sung-Gu;Park, Joon-Ho;Ahn, Jae-Hun;Kim, Ki-Sung;Choi, Joong-Dae
Proceedings of the Korea Water Resources Association Conference
/
2007.05a
/
pp.1558-1562
/
2007
우리나라 지형은 전체의 70%가 산지로 이루어져 있다. 특히 강원도 지역과 같이 산지가 대부분인 지역에서는 경사도에 따라 강우에 의한 유출특성이 크게 달라질 수 있으므로 지형의 경사가 고려된 유출량 산정방식이 필요하다. 현재 유출량 산정 방식에 많이 이용되고 있는 SCS의 CN값은 미국의 중서부 지역과 같이 경사도 5%미만인 지역에서의 유출량 산정에 적합한 유출곡선지수이다. 경사도 5%에서 유출량 산정에 적합한 CN값을 우리나라의 강원도 지형과 같이 복잡하고 경사도가 심한 지역에 적용하기에는 부적합하다. 따라서 본 연구에서는 연구대상지역인 도암댐 유역의 평균 25.8% 경사도를 고려한 직접유출량을 산정하여 기존 평균 경사도 5%일 때의 직접유출량과 비교분석하였다. 본 연구의 비교분석에 있어서 직접유출의 모의가 가능한 Long-Term Hydrologic Impact Assessment (L-THIA) ArcView GIS 모델을 사용하였고 모델의 적용성 평가를 위해 수문분석에 사용되고 있는 WHAT 모듈을 이용하여 분리된 직접유출과 비교하였다. 그 결과 유출량 산정을 위해 CN값 산정시 강원도 지형과 같이 지형이 복잡하고 경사가 심한 지형에 있어서는 유역의 경사도를 고려하여 유출을 모의해야 한다는 것을 알 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.