• The Korean Journal of Rheology
• /
• v.3 no.1
• /
• pp.68-75
• /
• 1991

상업적으로 많이 이용되는 폴리에틸렌테레프탈레이트(PET)에 액정중합체(LCP)인 열방성 폴리에스터를 첨가하여 유변학적 특성을 조사하고 전단속도와 혼합비에 따른 LCP domain의 형태 변화를 고찰하였다. 모체고분자 내 구형과 타원형을 이루는 LCP domain들 은 신장력에 의해 피브릴 구조의 변형되고 이 피브릴은 흐름방향으로 배향되어 용융체에 윤 활제와 같은 역할을 함으로써 용융점도의 감소를 보이는데 특히 높은 전단속도 영역에서 LCP가 30wt%까지 첨가될수록 큰 폭으로 감소하였다. 주사식 현미경(SEM)의 관찰로부터 LCP domain의 피브릴구조를 확인할 수 있었고 또한 LCP domain의 형태 변화가 용융점도 가 감소에 직접 관계됨을 확인할 수 있었다.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.4
• /
• pp.291-298
• /
• 2007

Purpose: To investigate the feasibility of TI-201 SPECT with intra coronary injection (lC-I) in the detection of viable myocardium, we have performed SPECT imaging after direct intracoronary injection of TI-201 and images were compared with those of stress-reinjection (Re-I) SPECT. Methods: Fourteen coronary artery disease patients (male 11, mean age 54 years) who had myocardial infarction or demonstrated left ventricular wall motion abnormality on echocardiography were enrolled. Three mCi of TI-201 was injected into both coronary arteries during angiography and images were acquired between 6- and 24-hour after injection. Reinjection imaging with 1 mCi of TI-201 was performed at 4-hour after adenosine stress imaging with 3 mCi of TI-201. Images were interpreted according to 4-grade visual scoring system (grade 0-3). Segments with mild to moderated uptake (${\leq}$grade 1), and upgraded more than one score with reinjection, and were defined as viable myocardium. Results: Image quality was poor in two cases with IC-I. Numbers of non-viable segments were 60 (23.8%) with IC-I, and 38 (15.1%) with Re-I, respectively. Overall agreement for perfusion grade per myocardial segment in each IC-I and Re-I was 76.5%. Overall agreement for viable segment between IC-I and Re-I was 90.5%. Only one out of 38 segments interpreted as non-viable with Re-I were interpretated as viable with IC-I. And 23 out of 214 segments interpreted as viable with Re-I were interpreted as non-viable with IC-I. Conclusion: Intracoronary TI-201 SPECT seemed to be not advantageous over stress-rest reinjection imaging in the assessment of myocardial viability, mainly due to low count statistics at 6-hour or 24-hour delayed time points. The feasibility of intracoronary TI- 201 SPECT is considered to be limited.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.301-307
• /
• 2002

The propagation characteristic of an optical waveguide was investigated by measuring with a near-field scanning optical microscope (NSOM) the evanescent field formed at the neighbor of its core-cladding interface. For this purpose, the NSOM system was developed specially as a form of Photon scanning tunneling microscope. The evanescent field distributions of several channel waveguides were measured at the wavelength of 1550 ㎚, and the usefulness of the system was verified by comparing experimental results with simulation results. In particular, the interference phenomena of the guided modes during their propagation along a multimode channel waveguide could be observed directly from the measured evanescent field distribution.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.417-431
• /
• 2020

In this study, a fundamental investigation was made on how to use LiDAR technology to determine the degree of weathering and alteration of rock mass. The purpose of the study was to identify the affecting parameters to LiDAR intensity and to quantitatively assess the relations among them through laboratory-scale experiment. A few potential affecting parameters were selected including scanning distance, incidence angle, surface roughness, surface color, mineral composition, and water saturation. In the experiment, FARO LiDAR unit was used for twelve different types of specimen. It was observed that the intensity was affected by, in the order of importance, surface color, incidence angle, scanning distance, property of rock, water condition, and surface roughness.

• Proceedings of the Ginseng society Conference
• /
• 1984.09a
• /
• pp.233-249
• /
• 1984

To find out the effects of ginsenosides to some parameters of the haemodynamic and gas exchange depending to the autonomic nervous system - and to border it against the psychosomatic nervous ways was the idea of these studies. The lot of the effects are very differentiated, so that we have to find out the special ginsenoside receptors in that system.

• Clinical and Experimental Reproductive Medicine
• /
• v.30 no.2
• /
• pp.151-163
• /
• 2003

연구목적: Estrogen은 포유류의 생리주기와 착상과정에서 중요한 조절인자로 작용한다. 본 연구에서는 난소 절제된 생쥐의 자궁에서 estrogen에 의해 직접 또는 간접적으로 조절되어 발현하는 유전자를 분석하고자 하였다. 연구재료 및 방법: 생후 8주된 생쥐의 양쪽 난소를 절제하고 14일 동안 회복기간이 지난 후, estrogen (300 ng/mouse)을 피하로 주사하였다. Estrogen 주사 후 6, 12시간째 자궁을 적출하여 cDNA microarray와 laser capture microdissection (LCM) 기술을 이용하여 estrogen에 의해 조절되는 유전자의 시공간적인 발현 양상을 조사하였다. 결 과: Estrogen 주사 후 6시간째에는 조사된 전체 유전자 가운데 0.9% (증가 22, 감소 49), 12시간째에는 8.4% (증가 351, 감소 287)에 해당되는 유전자가 두 배 이상 증가 혹은 감소하는 결과를 보였다. 또한 일부 증감된 유전자를 선택한 후 LCM 기술을 이용하여 시공간적인 발현양상을 확인한 결과 자궁내막상피세포에서만 estrogen에 의해 유전자의 발현이 증가되는 일부 유전자를 선별하였다. 결 론: 이상의 결과들을 종합해보면 1) estrogen에 의해 조절되는 유전자의 수나 증감의 정도는 12시간 이후에 더 많고, 크게 조절되며, 2) 유전자의 조절부위가 자궁의 특이적인 세포층에서 시공간적으로 조절됨을 의미한다. 이러한 유전자의 정보는 생리주기 또는 착상과정의 분자생물학적 기작을 이해하는 데 도움이 될 것이다.

• Journal of the Korean Vacuum Society
• /
• v.12 no.2
• /
• pp.144-149
• /
• 2003

Carbon tips were grown on Si cantilevers by applying an electron beam to them directly with Scanning Electron Microscope. A carbon tip was fabricated by aligning the electron beam directly down the vertical axis of Si cantilever and then irradiating a single spot on the cantilever for a proper time in the dominant atmosphere of residual gases generated by the oil of the diffusion pump. A number of control parameters for SEM, including exposure time, acceleration voltage, emission current, and beam probe current, were allowed to make various aspect ratio feature. The growth of carbon tips was not affected by the surface morphology of substrates. We could acquired the tip whose effective length is 0.5 $\mu\textrm{m}$, bottom diameter is 90 nm and cone half angle $3.5^{\circ}$ The growth technique of the high aspect ratio carbon tips on the tip-free cantilevers is available to reduce the complexities of fabricating sub-micron scale tips on the PZT thin film actuator integrated AFM cantilevers.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.7 no.2
• /
• pp.55-72
• /
• 1997

This paper presents a digital signature scheme for facsimile document which directly embeds a signature onto the document. We use multiple reference lines which have been scanned just before and modify each distance of changing pels both on the reference line specified by key and on the coding line with a single bit of the signature data. The time to take in signature is reduced by spreading of signature. Non-repudiation in origin, the 3rd condition of digital signature is realized by proposed digital signature scheme. The transmitter embeds the signature secretly and transfers it, and the receiver makes a check of any forgery on the signature and the document. This scheme is compatible with the ITU-T.4(CCITT G3 or G4 facsimile standards). The total amount of data transmitted and the image quality are about the same to that of the original document, and thus a third party notices that no signature is embedded on the document.

• Journal of Industrial Convergence
• /
• v.18 no.6
• /
• pp.99-105
• /
• 2020

In general, heat-based treatments are preferred to form the most natural and elastic curls. Therefore, this study measured the degree of hair damage, which has an influence on hair, in relation to the heat formation of the rods used during perms using a scanning electron microscope (SEM). To examine the influence of the heat formation rods on permanent waves, this study measured the temperature transmitted from such rods. Then, a treatment was given after cutting the hair according to the round shape. According to observation with a SEM, hair breakage was found in the portion in direct contact with the heat, and the broken surface was smooth. According to the study results, it is anticipated that there should be many studies on the rods used during perms in the consideration of their structure and importance using materials that have the property of even heat transmission.

• Korean Journal of Environmental Biology
• /
• v.19 no.2
• /
• pp.147-152
• /
• 2001

Whether the pretreatment of sublethal arsenic or cadmium may prevent from lethality of arsenic or cadmium to mice, respectively, and also the protection against to lethality of arsenic or cadmium which might be induced by pretreatment of arsenic or cadmium may be related with their hepatic glutathione contents were investigated. When sodium arsenite or cadmium chloride was subcutaneously injected to mice (ICR strain) using lethal doses, all mice of both group were killed. The mortality of mice which were subsequently injected with lethal arsenic 24 hours after pretreatment of sublethal arsenic was decreased, and the same result was obtained in the case of cadmium. Sublethal pretreatment of arsenic or cadmium prior to lethal arsenic or cadmium treatment to mice, respectively, didn't decrease hepatic glutathione contents of the survived mice, while decreases of that contents in liver were observed in the mice just after they died. Cadmium pretreatment decreased mortality of mice which subsequently injected with lethal arsenic, while arsenic pretreatment didn't protect against cadmium lethality. These results indicate that protection against arsenic or cadmium lethality to mice induced by pretreatment of sublethal arsenic or cadmium may be directly related to other factors induced by sublethal camium pretreatment, not to hepatic glutathione contents.