• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.4
• /
• pp.280-286
• /
• 1986

A newmethod of fast mask operators for edge detection is proposed, which is based on the matrix factorization. The output of each component in the multi-directional mask operator is obtained adding every image pixels in the mask area weighting by corresponding mask element. Therefore, it is same as the result of matrix-vector multiplication like one dimensional transform, i, e, , trasnform of an image vector surrounded by mask with a transform matrix consisted of all the elements of eack mask row by row. In this paper, for the Sobel and Prewitt operators, we find the transform matrices, add up the number of operations factoring these matrices and compare the performances of the proposed method and the standard method. As a result, the number of operations with the proposed method, for Sobel and prewitt operators, without any extra storage element, are reduced by 42.85% and 50% of the standard operations, respectively and in case of an image having 100x100 pixels, the proposed Sobel operator with 301 extra storage locations can be computed by 35.93% of the standard method.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.195-201
• /
• 2006

In multicarrier code division multiple access(MC-CDMA), the total system bandwidth is divided into a number of sub-bands, where each subband may use direct-sequence(DS) spreading and each subband signal is transmitted using a subcarrier frequency. In this paper, the system performance analysis of MC-CDMA using to gain combining(EGC) and maximal ratio combining(MRC) method over frequency selective Nakagami-m fading channel is analyzed. In the proposed system, a data sequence is serial-to-parallel converted, and MC-CDMA is used on each of the parallel data streams. The data streams are spread at both the symbol fraction level and at the chip level by the transmitter. In this paper, the compare to analysis,two standard diversity combining techniques, EGC and MRC, The good performance of system using to MRC more than EGC

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.1-8
• /
• 1990

In this paper, the transient electromagneti wave scattering at dielectric cylinder is studied by new numerical analysis method. Basic formulation of boundary integral equation (BIE) for numerical method is started weighted residual technique. BIE is made to two simultaneous equation at surface inner and outside point of dielectric cylinder in extended boundary condition (EBC) and surface boundary condition (SBC). Numerical method is used Boundary element method (BEM) that is two form, one is direct method and the other is indirect method, so that this method that transformes operator inversion martics is used numerical analysis. A good agreement of this numerical solution and the other results is obtained.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.269-272
• /
• 1999

물체내부의 단층구조를 나타내는 B-모드 영상은, 물체의 내부 경계로부터의 반사신호를 직접 비디오 신호로 변환하여 그 진폭에 비례하는 휘도 또는 색상으로 나타내고 있다. 그러한 시간영역 파형에 의한 처리에 있어서는 각 신호가 시간적으로 근접해 있을 경우 영상화가 곤란하다. 본 연구에서는 B-모드 영상에 있어서 거리분해능을 향상시키기 위한 방법으로 캡스트럼법을 이용하는 것을 제안하고, 그 방법에 의해 음속이 알려진 얇은 물체의 두께를 보다 정확하게 측정, 표시함으로써 B-모드 영상화에 있어서의 분해능 향상 가능성을 보였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.366-367
• /
• 2003

암모니아 가스는 무색의 기체이지만 자극성이 크면서 부식성이 있고 수용액이 알칼리성인 대표적인 악취물질이다. 보통의 경우는 굴뚝 등에서 배출가스의 형태로 대량 방출되기도 하지만 자연상태에서도 여러 가지 생물학적 또는 화학적 반응 등을 통하여 생성되므로, 일상적인 생활 공간에서도 쉽게 검출될 수 있는 물질이다. 대기 중 암모니아의 농도는 기체상 시료를 직접 분석하는 가스 크로마토그래피와 시료를 액체상으로 변환시킨 후 암모늄 양이온의 농도를 분광광도법이나 중화적정법으로 측정한다. (중략)

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.490-494
• /
• 2007

본 논문에서는, 한 장의 저해상도 영상으로부터 고해상도 영상을 생성하는 새로운 방법을 제안한다. 제안하는 방법은 고해상도 영상과 저해상도 영상의 관계를 나타내는 선형연립방정식을 푸는 원리에 기초한다. 하지만 이러한 방정식은 일의적으로 정해지지 않기 때문에 고해상도 영상을 나타내기 위챈 사용된 미지수를 축소하기 위한 이산코사인변환(DCT)의 에너지 집중특성을 이용하였다. 또한 그 구현방법으로 저해상도 영상을 일련의 작은 블록으로 나누어 각 블록영상에 적용하는 블록분할법(block division method)과 전체프레임 영상에 직접 적용하는 전 프레임법(full frame method)을 사용하였다. 최종적으로 본 제안방법의 유효성을 확인하기 위해 시뮬레이션 실험영상에 적용한 결과 양호한 결과를 나타냈다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.2 no.1
• /
• pp.1-10
• /
• 1996

초음파는 액체 및 고체의 매질 속에서도 그 전달 특성이 우수하여 수중 물체의 감지, 지질 조사 자원탐사뿐만 아니라, 의학 분야에서도 널리 사용되고 있다. 물체유동정보 측정방식에는 연속파를 이용한 도플러식과 펄스 신호를 이용한 도플러는 거리 분해능이 좋으므로 깊이에 따른 속도 정보를 쉽게 얻을 수 있는 장점이 있으나, 수신되는 도플러 신호가 탐촉자의 특성과 매질 속에서의 전파특성 등에 의하여 송신된 신호와 파형이 다르고 복잡한 주파수 특성을 가지므로 연속파에서와 같이 도플러 주파수를 직접 측정하기 곤란하다. 도플러 주파수를 검출하기 위하여 여러 방법이 개발되어 있으나, 측정거리와 측정속도의 제약과 더불어, 실시간(real time) 처리에 의한 분포적 측정이 어려운 실정이다. 본 연구에서는 시간 영역에서 국소 데이터를 이용하여 펄스 신호의 위상을 정의하고 실시간에서 펄스 신호를 위상으로 변환하는 신호 처리법을 제안하였다. 또한 이 신호 처리법을 응용하여 측정 범위의 위상 곡선에서 위상 차를 계산함으로써 평균 가속도와 유동속도정보를 분포적으로 얻을 수 있는 새로운 펄스 도플러 기법을 제안하였으며, 모델 신호를 만들어 제안된 방법의 유용성을 검토하였다.

• The Journal of Engineering Geology
• /
• v.22 no.4
• /
• pp.459-466
• /
• 2012

A difficulty encountered in engineering seismic mapping is that reflection events from shallow discontinuities are commonly overlapped with coherent noise such as air wave, direct waves, head waves, and high-amplitude surface waves. Here, the radial trace transform, a simple geometric re-mapping of a trace gather (x-t domain) to another trace gather (v-t domain), is applied to investigate the rejection effect of coherent linear noises. Two different types of data sets were selected as a representative database: good-quality data for intermediate sounding (hundreds of meters) in a sedimentary basin and very noisy data for shallow (${\leq}50m$) mapping of the weathered zone and bedrock surface. Results obtained with cascaded application of the radial transform and low-cut filtering proved to be as good as, or better than, those produced using f-k filtering, and were especially effective for air wave and direct wave. This simple transform enables better understanding of the characteristics of various types of noise in the RT domain, and can be generally applied to overcoming diffractions and back-scatterings caused by joints, fractures, and faults commonly that are encountered in geotechnical problems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2618-2624
• /
• 2009

Harmonics (or distortion in wave form) has always existed in electrical power systems. It is harmless as long as its level is not substantial. However, with the recent rapid advancement of power electronics technology, so-called nonlinear loads, such as variable frequency drives for motor power/speed control, are increasingly finding their way to shipboard or offshore applications. In this paper a new approach to direct torque control (DTC) of induction motor drive is presented. In comparison with the conventional DTC methods the inverter switching frequency is constant and is dramatically increased, requiring neither any increase of the sampling frequency, nor any high frequency dither signal. The well-developed space vector modulation technique is applied to inverter control in the proposed DTC-based induction motor drive system, thereby dramatically reducing the current harmonics. As compared to the existing DTC approach with constant inverter switching frequency, the presented new approach does not invoke any concept of deadbeat control, thereby dramatically reducing the computations.

• Composites Research
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2004

A new non-destructive evaluation method using tapping sound is proposed. This method, named Tapping Sound Analysis, is using the difference between tapping sound data of healthy structure and defective structure as the criteria of determination of internal defect of composite structure. For the characterization of tapping sound, a feature extraction method based on wavelet packet transform is proposed. And a feature index is defined for the decision of existence of internal defects. To prove the possibility of proposed method as a non-destructive evaluation method, experimental study is performed. The tapping sound data of healthy structure and defective structure are measured and compared based on the proposed decision method. The experimental results showed that the feature index is a good indicator for the determination of internal defects.