• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.4
• /
• pp.221-225
• /
• 1982

Soil and water temperature were measured at different distances from the irrigation inlet of a Paddy land supplied with $16^{\circ}C$ water. The rice growth and yields of Nongbaek variety (Japonica) and Milyang 23 variety (Indica${\times}$Japonica)were interrelated with average soil and water temperature from tillering to heading stage. Water temperature was asymtotically increased to $21^{\circ}C$ as cold water forwarded, while the distribution of soil temperature showed linear shape with distance overall, water temperature was 1 to $2^{\circ}C$ higher than soil temperature. Cold soil and water temperature shorterned culm length and panicle exertion and retarded heading date resulting in yield reduction, Response of rice growth and yield to water temperature was apparently different between two varieties. Nongbaek variety produced no grains below $17^{\circ}C$, but it's reproductive growth was possible from 17 to $20^{\circ}C$. A normal yield could be obtained at $21^{\circ}C$. Comparatively, no reproductive growth of Milyang 23 variety was Possible even at $19^{\circ}C$.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.98-98
• /
• 2011

중소규모 하천에서 많이 설치되어 있는 경사형보를 대상으로 하류부 세굴에 대한 수리모형실험과 수치모의를 통하여 경사형보 하류부 세굴특성과 세굴영향인자들에 대한 민감도 분석을 실시하였다. 수리모형실험은 폭 0.8m, 길이 20m의 가변경사 직선 개수로에서 1 : 2(H/L)경사를 가지는 경사형보의 높이, 월류수심, 하류부 수심 변화에 따른 최대 세굴심과 세굴길이의 변화를 관측하였고, 수치모의는 유사이동 모의가 가능한 3차원 수치모형인 FLOW-3D를 이용하여 경사형 보의 경사 변화에 따른 하류부 세굴특성을 모의하였다. 수리모형실험 결과 최대 세굴심 및 세굴길이에 가장 영향을 크게 미치는 인자는 월류고이며, 하류부 수심은 최대 세굴심과 세굴길이의 감소효과 뿐만 아니라 세굴공의 형상에도 영향을 미쳤다. 낙하류의 유입 각도가 예연보에 비하여 작은 경사보는 예연보에 비하여 수평방향 유속이 상대적으로 증가하여 세굴길이가 증가하였으며 이로 인하여 세굴공 하류부 천이영역의 사면경사가 상대적으로 완만하게 형성되었다. 세굴공의 상류부에 재순환 영역이 발생되어 천이영역에서 이송되는 유사의 최대세굴심 발생 위치에 퇴적되는 현상을 방해하며 세굴공의 모양은 완전히 발달된 이중(double) 세굴공을 생성하였으며, 특히 낙하류의 유입각도와 하류부 수위의 영향으로 하류수심($h_t$)과 낙차고(H)의 비($h_t/H$)가 1.0 미만인 경우에 이중(double) 세굴공이 발생하였다. 경사형보의 경사각 영향에 따른 하류부 세굴 영향은 3차원 수치모형을 이용하여 모의하였으며, 경사각을 1V/2H, 1V/3H, 1V/4H로 변화시키며 수치모의를 수행하였다. 수치모의 결과 경사각이 증가할수록 최대 세굴심은 증가하는 경향을 보이고 그에 따른 증가율은 감소하였다. 보 높이, 월류고, 하류부 수심, 경사각 변화에 따른 세굴심의 변화는 상대민감도 방법을 이용하여 비교하였으며 주요 영향인자에 대한 민감도비는 월류고가 보 하류부 세굴에 가장 큰 영향을 미치고, 경사각, 보 높이, 하류부 수심 순이다. 특히 보 하류부의 수심은 음의 민감도를 보이며, 이는 보 하류부 수심이 증가할수록 세굴심이 감소하는 것을 의미한다. 추후 보완 실험 및 수치모의를 추가 활용한다면, 경사형보 하류부 물받이 및 하상보호공 설계를 위한 정량적인 기초자료를 제공할 수 있을 것으로 판단된다.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.370-374
• /
• 2007

An analytical method for the simultaneous determination of four tetracycline (oxytetracycline, tetracycline, chlortetracycline, doxycycline) in egg samples was developed and validated using liquid chromatography with ultraviolet detection. Egg samples were extracted by the liquid-liquid extraction based on acetonitrile. The chromatographic separation was achieved on a reverse phase C8 column with gradient elution using a mobile phase of 20 mM oxalic acid (pH 1.5)/acetonitrile. The procedure was validated according to the Food Drugs Administration guideline determining accuracy, precision, and limit of detection. Mean recovery of tetracyclines from spiked egg samples (50, 100, 200, 400, and $800{\mu}g/kg$) were 78.8-109.3%. Linearity in concentration range of $50-800{\mu}g/kg$ was obtained with the correlation coefficient $(r^2)$ of 0.994-0.999. The intra- and inter-day precision (relative standard deviation; RSD) was between 0.3-12.8 and 0.2-11.7%, respectively. Limit of detection (LOD) and limit of quantification (LOQ) for the investigated tetracyclines were 30 and $50{\mu}g/kg$ depending on egg samples, respectively. This method was reliable, sensitive, economical and suitable for routine monitoring of tetracycline residues in dairy egg.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.68-73
• /
• 2010

In order to develop the square wave voltammetric method determining cimetidine in an ampoule for injection, $5.00{\times}10^{-4}\;M$ cimetidine HCl solutions prepared with phosphate buffers of various pH values (3.01~8.97) were investigated by SWV. The well defined single peak due to the electrochemical reduction of -C=N-C$\equiv$N- in the structure of cimetidine moved towards the cathodic direction by -0.051V/pH as the pH values were increased indicating the involvement of hydrogen in its reduction. The calibration curves of cimetidine HCl in the concentration range between $1.00{\times}10^{-5}\;M$ and $5.00{\times}10^{-3}\;M$ prepared using three phosphate buffers yielded the slopes of 127,407nA/M (pH 3.01), 115,125nA/M (pH 5.00) and 111,287nA/M(pH 7.00) with excellent linearities of $R^2{\geqq}0.9997$. When one ampoule of Tagma Inj.$^{(R)}$ was analyzed by standard addition method by SWV, the within-day precision study (n=4) on the day of sample preparation resulted in the contents of cimetidine as $203{\pm}3.8\;mg$ (102% of the specified contents, RSD of 1.9%) and the inter-day precision (n=4) through 5 days was reasonable as 1.3% of RSD.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.705-713
• /
• 2018

An automotive ball joint connects the suspension system to the steering system and helps to enable rotational and linear motion between the two elements for steering. This study examines a ball joint used in medium and large-sized pickup trucks. Ball joints consist of a stud, socket, bearing, and plug. The main structural performance metrics of ball joints are the pull-out strength and push-out strength. These structural parameters must meet certain criteria to avoid serious accidents. Test and simulation methods are used to investigate the design requirements, but tests are time-consuming and costly. In this study, we modeled ball joints in SolidWorks and performed a finite element analysis in Abaqus to predict structural performance. The analysis was used to obtain the structural performance required for the static analysis of a 2D axisymmetric model. The uncertainties in the manufacturing of the ball joint were assumed to be the manufacturing tolerances, and the dimensional design variables were identified through case studies. The manufacturing tolerances at each level were defined, and the results were compared with experimental results.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.4
• /
• pp.359-364
• /
• 2014

In this study, we developed a HPLC method for the separation and analysis of methylparaben and p-anisic acid, which are commonly used as a synthetic preservative and natural preservative, respectively. Methylparaben and p-anisic acid have same molecular weight (152.15 g/mol), similar structure and same maximum absorption wavelength (250 nm), thus they showed same retention time (RT) value (13.3 min) in HPLC experiment. We observed that two substances are separated on C18 column after methylparaben was derivatized selectively through the acetylation reaction. Instead, RT of the acetylated methylparaben was moved to 23.9 min from 13.3 min. The average retention time was $23.9{\pm}0.1min$ and peak area values was $5042882{\pm}4778$. In addition it showed a high linearity in the calibration curve with a correlation coefficient (R2) of 0.9999658. Detection and quantitation limits were $1.47{\mu}g/mL$ and $4.44{\mu}g/mL$, respectively. In conclusion, the developed method can be useful for separation and analysis of preservatives with similar structure in cosmetic fields.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.337-349
• /
• 2016

In this study, an analytical method to evaluate the quality of isoflavonoid compounds purified and isolated from the fruits of Cudrania tricuspidata was developed and validated using Ultra Performance Liquid Chromatography (UPLC). The fruits of C. tricuspidata were extracted with methanol and further fractioned with n-hexane, ethyl acetate and water. The resulting ethyl acetate extract separated into four isoflavonoid compounds by a combination of silica gel and sephadex LH-20 column chromatography. The structures of the compounds were elucidated as alpinumisoflavone, 6,8-diprenyl genistein, 6,8-diprenyl orobol, 4'-O-methylalpinumisoflavone by various techniques such as UV-Vis, ESI-MS, $^1H\;NMR$ and $^{13}C\;NMR$ spectroscopy. Finally, a method to characterize the compounds was developed by using the UPLC equipped with a $C_{18}$ column and a gradient mobile phase system consisting of 2% acetic acid in water (solvent A) and 2% acetic acid in methanol (solvent B). The developed method was validated with the parameters such as selectivity, linearity, limit of detection, limit of quantitation, accuracy, and precision, which are defined by the ICH (International Conference on Harmonization). Using the validated method, the compounds in the fruits harvested in different months were also quantitatively analyzed. We propose this approach this approach can readily be utilized as an efficient evaluation method to quantify the extracts of C. tricuspidata.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1177-1189
• /
• 1994

This paper aims to develop the numerical model for prediction of the channel migration by analyzing of sediment and flow characteristics with patterns of channel in alluvial rivers. Flow in rivers constitutes to be the meandering or the braided form and rarely straight channel through morphologically stable patterns with mutual actions between the flowing water and bed materials. In order to develop the model for simulation of the channel migration, the channels are divided into two types with positive or negative sign by the direction of curvature radius of the centerline channel ($r_c$). That is, the single bend-channel consists of only one curvature of positive or negative sign and the multi-bend channel consists of two more curvatures of positive or negative sign, respectively. The model analyzes the sediment and flow characteristics under the influence of superelevation, spiral motion, irregularity in bed topography and depth-averaged velocity of channels. For reliability of this model, the single bend-channel and the multi bend channel are compared with experiment data in other models and the measured field data in the Keum-River, respectively. As a result, the both com parisians turn out to be excellent.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.215-224
• /
• 2009

A survey on the actual state of heating, cooling, ventilation, and air-flow and experimental measurement of temperature and humidity distribution in tomato greenhouse were performed to provide fundamental data required in the development of air-flow control technology. In single-span plastic houses, which account for most of 136 tomato greenhouses surveyed, roof windows, ventilation and air-flow fans were installed in a low rate, and installation specs of those facilities showed a very large deviation. There were no farms installed greenhouse cooling facilities. In the hot air heating system, which account for most of heating type, installation specs of hot air duct showed also a large deviation. The exhaust air temperature and wind speed in hot air duct also were measured to have a big difference depending on the distance from the heater. We are using the maximum difference as indicator to determine whether temperature distribution is uniform. However if the temperature slope is not identical in greenhouse, it can't represent the uniformity. We analyzed relation between the maximum difference and the uniformity of temperature and humidity distribution. The uniformity was calculated using the mean and standard deviation of data from 12 measuring points. They showed high correlation but were represented differently by linear in the daytime and quadratic in the nighttime. It could see that the uniformity of temperature and humidity distribution was much different according to greenhouse type and heating method. The installation guidelines for ventilation and air-flow fan, the spread of greenhouse cooling technology for year-round stable production, and improvement of air duct and heating system, etc. are needed.

• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.5-16
• /
• 1999

본 연구의 목적은 Navajo 직물의 역사적 발달을 고전시대를 중심으로 살펴보고 특히 외부영향에 따른 직물의 변화를 고찰하는데 있다. 구체적으로 1) 고전시대의 전통적인 직물은 어떻게 발달하였는가\ulcorner 2) 고전시대 직물의 전통적 요소와 외부영향요인은 어떤 점이 다른가\ulcorner 예 초점을 맞추었다. 연구방법은 아메리카 인디언의 이동,문화 Navajo 직조 및 직물에 대한 문헌을 바탕을 조사하였고 아리조나 주립박물과 아리조나 역사 박물관을 방문하였으며 박물관 안에 있는 전문가들의 조언을 듣고 연구의 자료를 보완하였다. 또 비교 미학적 차원에서 고전시대 navajo 직물의 전통적 요소와 외부영향 요인을 분석하였고 외부영향을 받은 직물의 예를 시각적자료로 제시하였다. 이연구는 인디언직물에 대한 이해, 고전시대. Navajo 직물의 문헌고찰을 통한 민족의복의 문화적측면에 기여할수 이고 현대적 감각을 지닌 Navajo 직물을 한국직물에 접목 응용하는데 도움을 줄수 있다 본 연구의 결과는 다음과 같다. 1. Navajo 직물을 고전, 전환, 양탄자 시대로 구분되었고. 이중에서 고전시대가 navajo 직물의 특성을 가장 잘 나타내었으며 발달된 직조기술을 보였다. Navajo인들의 직조기술은 1863년경 최고조에 달했다. Navajo 직물의 디자인 주제로 주로 인간을 둘러싸고 있는 환경에서 얻어졌고 이것들은 직선의 기하학적 형태로 구체화되었다. 또한 직물에 표현된 색도 자연과 밀접한 관련성을 갖는 있었다. 2. Navajo 직물의 주용한 용도는 여성용 드레스, 남성용 셔츠는 어깨에 걸치는 두르개였다. 여성용 드레스는 동일한 크기의 직물의 두장을 직조한 후에 꿰매었고 남성용 셔츠는 머리가 들어갈수 있는 구멍이 있는 장방형 판쵸 스타일이었다. 어깨에 걸치는 두르개는 여성의 경우 가운데가 검은색이고 가장자리가 푸른색인형태오 흰색과 붉은 색이 교대로 나타나는 형태의 2가지가 있었고 남성용은 고전시대의 대표라고 일컬어지는 족장 두르개였다. 3. Navajo 직물은 외부의 영향을 받아 많은 변화를 가져왔다. 즉 스페인 사람들로 인하여 면 섬유대신 양모섬유를 사용하게 되었고 전통적 모양과 다른직물이 출현하게 되었다. 또한 인디고 염류, 색소니 실, 바에타 직물의 도입으로 다양한 색상의 표현이 가능해졌고 이와 관련하여 다이아몬드 십자형 톱니형 무늬드이 나타나게 되었다. 4, 고전시대를 대표하는 직물로 족장 두르개, 쇼올, 안장덮개를 들수 있으며 이 직물들에서 뚜렷하게 외부영향 요인을볼수 있다. 즉 족장 두르개의 가장 정교한 단계에서 다이아몬드 무늬가 가장가리 가운데 모서리에 위치하여 9지점 배치를 이룬 것 쇼올의 경우 폭보다 길이가 긴 형태의 비전통적 모습을 나타낸 것 안장덮개에서 보여지는 여덟포인트 별 무늬도 외부의 영향을 받은예이다. 뛰어난 직조기술로 유명한 navajo인들은 변화에 잘 적응하는 특성을 갖고 있었다. 외부의 영향을 그들은 긍정적으로 받아들였고 자기 자신들의 필요에 맞도록 수정하여 정체감을 잃지 않으면서도 문화를 발전시켰다. 따라서 고전시대의 Navajo 직물은 고유적 요인과 외래적 요인의 조화를잘 나타내고 있으며 디자인의 탁월함이 세련됨 천연염료와 인조염료의 배\ulcorner에 의한 색상의 우월성 등으로 오늘까지 높이 평가되고있다.