• 한국가스학회:학술대회논문집
• /
• 2007.04a
• /
• pp.42-49
• /
• 2007

가스크로마토그래피 불꽃이온화검출기(FID)에서, 천연가스 표준물질만을 사용하여 분석할 때 발생할 수 있는 분석 불확도에 대하여 연구하였다. 일반적으로 $10^5$ 범위 농도까지 직선성이 확보된 것으로 알려진 FID 검출기에 대하여 실제 분석에서 동일한 직선성이 확보되는지를 확인하였다. 본 연구에서 7성분으로 조성된 천연가스용 표준가스를 샘프링 loop의 크기를 1.0mL, 0.50mL, 0.25mL로 변환시키면서 GC/FID를 사용하여 분석한 상대표준불확도 결과는 다음과 같다. 메탄은, 0.458 %, 에탄은 0.20247%, 프로판은 0.1497%, i-부탄은 0.1854 %, n-부탄은 0.2977%, i-펜탄은 0.263%, n-펜탄은 0.383%이었다. 각 경우에서 직선성 상대표준불확도값이 $0.15%{\sim}0.45 %$까지 이른다. 일반적으로 농도가 높은 메탄의 경우에 직선성 불확도값이 큰 값을 보여 주었고 농도범위가 1-5%인 $C2{\sim}C5$의 경우는 작은 직선성 표준불확도를 나타내었다.

• Communications of Mathematical Education
• /
• v.22 no.3
• /
• pp.337-347
• /
• 2008

'Slope' is an invariant of a straight line and 'Linear Equation' is an algebraic representation of a straight line in the cartesian plane. The concept 'slope' is necessary for algebraically representing a geometrical figure, line. In this article, we investigate how those concepts are dealt with in school mathematics and suggest some improvement methods.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.399-402
• /
• 2001

본 논문에서는 항공 영상에서 직선 성분을 강건하게 추출하기 위한 새로운 영상 필터링 기법을 제안한다. 제안하는 기법은 지상 구조물의 추출에 유용한 직선 특징을 이루는 에지와 비직선 특징을 이루는 에지의 대비도를 증가시키기 위하여 비선형, 비등방 확산 기법 [2]을 영상에 적응적으로 적용한다. 이를 위하여 확산 매개변수를 제안하는 새로운 직선성 척도로 설정하고 영상의 각 점에서의 직선성 값에 따라 적응적으로 확산을 시킴으로써 확산 과정에서 직선 특징을 잘 보존하고 비직선 특징을 효과적으로 제거한다. 본 논문에서는 직선성 척도로서 에지 체인 위의 점들의 방향성 엔트로피를 제안하고 다양한 영상에 대한 실험을 통해서 엔트로피 척도가 영상에서의 직선 특징을 추출하는데 효율적임을 보인다.

• Journal of the Korean Society of Radiology
• /
• v.6 no.5
• /
• pp.389-394
• /
• 2012

In this study, based on IEC 60601-2-54 standard load conditions presented in the limited interval over the air kerma at the absolute linearity closely evaluated by measuring the X-ray results were as follows: 10 units targeted all Diagnostic X-ray generating device (DR) presented in the IEC 60601-2-54 standard linearity of air kerma emerged as inappropriate, the general evaluation of the dose linearity from four in the top 50% and 80 kVp % of the two measurement series were as irrelevant all the rest from six of the top tube voltage of 50% and 80% of the two measurement series, appeared in all suitable. Presented in IEC 60601-2-54 standard dose linearity testing and conventional linearity tests showed many differences. IEC 60601-2-54 standard linearity in the proposed international standards of air kerma is the recommendation of the existing dose linearity considerably more feasible, and to quantify the amount of radiation as the standard suggested by the standard IEC 60601-2-54 air kerma of a diagnostic X-ray imaging device linearity performance management is considered key elements in the critical appraisal.

• Proceedings of the Korea Contents Association Conference
• /
• 2013.05a
• /
• pp.219-220
• /
• 2013

현재 우리나라의 유방촬영장치의 정도관리 항목에는 국제규격에서 원하는 직선성이 빠져있다. 직선성은 방사선량 및 방사선질의 조정을 위한 요구사항이므로 반드시 측정이 되어야한다. 본 연구에서는 유방촬영장비 5대를 대상으로 IEC 60601-2-45 규격에 맞는 직선성을 시험하고 평가함으로써 좀 더 발전된 정도관리방향을 제시하고자 한다.

• The Journal of the Korea Contents Association
• /
• v.15 no.5
• /
• pp.436-443
• /
• 2015

The purpose of this study was to develop a self-diagnostic linearity quality control techniques of computed tomography (CT) by using measured CT number values from the various concentrations of iodine contrast media (CM) is diluted with distilled water under each condition of the tube voltage. The equipment was used for four-channel MDCT, the iodine concentration were using 300 mgI/ml, 350 mgI/ml, 370 mgI/ml and 400mgI/ml. Dilution of CM in distilled water was increased by each 5% until the maximum CT number values were measured. We applied the tube voltages for 90 kVp, 120 kVp, 140 kVp. As a result, we was obtained to the nearest linearity as 0.993 of correlation coefficient between the iodinated CM from 5% to 25% in 400 mgI/ml and the CT number values by 90 kVp. In conclusion, the proposed self-diagnostic linearity quality assurance technique by using iodine CM can be utilized to replace the AAPM CT performance phantom.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.339-344
• /
• 2014

The quality control items of mammography devices in South Korea do not include the linearity, which is required by international standards. The linearity is a requirement for the adjustment of radiation dose and radiation quality. This study tested the linearity, which was suitable for the IEC 60601-2-45 standard, of the 5 mammography devices. All showed adequate results. Consistent measurement management is required for more developed quality control in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.918-920
• /
• 2011

In this paper, a simple edge pattern classification method is proposed for detecting straight line segments in an image corrupted by impulse noise. Corrupted images have complicated edge patterns. To detect straight line from an complicated edge pattern, it is needed to simplify the entire edge. The proposed algorithm separates the entire edge into 4 directional partial edge patterns. Each line segment is separated from the partial edge image where several line segments are overlapped, and then the straight line is detected. The results of the experiments emphasize that the proposed algorithm is simple but accurate.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.409-414
• /
• 2021

In order to acquire an image from a gamma camera, linearity correction must be performed. To this end, digital coordinates are acquired by using a linearity map to accurately specify the location where the scintillator and gamma rays interact. In this study, a method for acquiring undistorted images and digital coordinates was developed using a lookup table and maximum likelihood position estimation without using a linearity map. The proposed method was verified by configuring a small gamma camera through DETECT2000 simulation. A gamma camera was constructed using a GAGG scintillator and a SiPM optical sensor, and a gamma-ray interaction was generated at the center of the scintillator, and a lookup table was prepared using the ratio of the signals obtained from the SiPM. Through the prepared lookup table and the maximum likelihood position estimation, the position of the signal obtained by the gamma-ray interaction was acquired as digital coordinates to compose an image. As a result, the linearity was maintained compared to the generally acquired image, the accuracy of the location where the gamma-ray interaction was generated was excellent, and the distance between the locations was uniform. Since the lookup table obtained through simulation is created using the ratio of the signal, it can be directly used in the experiment, and the position of the signal can be conveniently obtained with digital coordinates with corrected linearity without creating a linearity map.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.887-893
• /
• 2018

The purpose of this study is to compare the performance of X-ray generators installed in hospitals and universities and apply the quality control items of diagnostic X-ray generators to recognize the importance of periodic performance management. First, the reproducibility and linearity test results showed that the PAE of the reproducibility evaluation was high for the GX-650 devices that met the acceptance criteria in all the experimental conditions and lacked the periodic quality control. In the linearity evaluation, when the tube voltage was set to 100 kVp, It was measured to deviate from the error. In addition, it was found that the PAE in the low-accuracy evaluation results relative to an X-ray tube voltage and tube current of the device low occurrence frequency. The HVL experiment was included in all of the devices at the HVL by tube voltage. Therefore, it is necessary to recognize the importance of quality control of all devices rather than hospital and laboratory, and to manage the device performance by actively managing the device, and to establish a short - term quality control system like special medical devices.