• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.269-275
• /
• 2005

We analyzed the unit cell performance against the cathode porosity, which is supposed to be closely related with active sites for the cathode reaction. In order to fabricate the unit cells with different porosity in the cathode layer we changed the mixing ratio of fine and coarse LSCF cathode powders. The final porosity of each cathode layer was 14, 23, 27, $39\%$ respectively. According to the electrochemical analysis of unit cell performance via DC current interruption and AC impedance method, the electrodic polarization resistance was diminished as the cathode porosity increased. The decrease of polarization resistance was attributed due to the increase of active reaction sites and the enhancement of overall unit cell performance could be explained in the same line.

• The Journal of Engineering Geology
• /
• v.30 no.2
• /
• pp.185-198
• /
• 2020

High-density rapid expansion material is a method that increases the solid volume of injection materials due to hydration and foam reactions at the same time as spraying. It is an effective method for securing ground stability, restoring subsidence, and loading during construction of structures. In this regard, through the mechanical experiments of injection materials, the stability of the foundation ground of the structure and the effect of increasing the endurance using site construction were analyzed. The results of the experiment showed that the unit weight of soil decreased by 10.5% after injection of the filling material, and the allowable support for the structure was deemed safe, and the subsidence by each section after ground improvement was determined to be safe at 2.28, 1.55 and 0.46 cm, respectively, with an acceptable subsidence of less than 5 cm. After the field test, five inclinometers were installed on the top floor of the target building to measure the displacement of the X and Y axes. As a result of the measurement, no displacement related to the phenomenon of inequality or subsidence cracks of the structure was measured for about 16 months (509 days) after construction. This can be judged to be a sufficient increase in the stability of the ground after the injection of rapid expansion.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.78-83
• /
• 2014

In this research, we evaluated the performance and characteristics of carbon supported PtM (M = Ni and Y) alloy catalysts (PtM/Cs) synthesized by a modified polyol method. With the PtM/Cs employed as a catalyst for the oxygen reduction reaction (ORR) of cathodes in proton exchange membrane fuel cells (PEMFCs), their catalytic and ORR activities and electrical performance were investigated and compared with those of commercial Pt/C. Their particle sizes, particle distributions and electrochemically active surface areas (EAS) were measured by TEM and cyclic voltammetry (CV), while their ORR activity and electrical performance were explored using linear sweeping voltammetries with rotating disk electrodes and rotating ring-disk electrodes as well as PEMFC single cell tests. TEM and CV measurements show that PtM/Cs have the compatible particle size and EAS with Pt/C. When it comes to ORR activity, PtM/C showed the equivalent or better half-wave potential, kinetic current density, transferred electron number per oxygen molecule and $H_2O_2$ production(%) to or than commerical Pt/C. Based on results gained by the three electrode tests, when the PEMFC single cell tests were carried out, the current density measured at 0.6 V and maximum power density of PEMFC single cell adopting PtM/C catalysts were better than those adopting Pt/C catalyst. It is therefore concluded that PtM/C catalysts synthesized by modified polyol can result in the equivalent or better ORR catalytic capability and PEMFC performance to or than commercial Pt/C catalyst.

• Economic and Environmental Geology
• /
• v.45 no.1
• /
• pp.23-30
• /
• 2012

Major ions and nitrogen isotopic analyses were performed to determine the geochemical characters and to identify the source of nitrate of the shallow groundwater around agricultural field in the Youngdong area. The pH value of groundwater ranges from 60. to 8.2 (pH 7.2, mean). The average of EC, Eh and DO is 369 ${\mu}S/cm$ (70~729 ${\mu}S/cm$), 165.6 mV (29~383.2 mV), 4.3 mg/L (1.8~8.0 mg/L) respectively. The ion concentraion of groundwater was in the order of $Ca^{2+}$>$Na^{2+}$>$Mg^{2+}$>$K^{2+}$ and ${HCO_3}^-$>${NO_3}^-$>${SO_4}^{2-}$>$Cl^-$>$F^-$. Most of groundwater is Ca-$HCO_3$ type. The groundwater was affected by water-rock interaction in the shallow depth. Some groundwater is Ca-Cl or Na-$HCO_3$ (2.5%) type that was due to agricultural activities. The $NO_3$_N concetration of grondwater range from 10.2 mg/l to 26.9 mg/l, which show that this area is under nitrate pollution. ${\delta}^{15}N-NO_3$ value of the groundwater is the origins of are a combination of animal wastes and man-made fertilizers.

• Journal of the Korean earth science society
• /
• v.32 no.2
• /
• pp.170-179
• /
• 2011

Fly ashes derived from coal fired power plants have unique chemical and mineralogical characteristics. The objective of this research was to study how indigenous bacteria affected heavy metal leaching in fly ash slurry during the fly ash-seawater interactions in the ash pond located in Yeongdong seashore, Korea. The in-situ pH of ash pond seawater was 6.3-8.5. For this study, three sites of the ash pond were chosen to collect a sample of fly ash slurry. Three samples that had a mix of fly ash (0.4 L) and seawater (1.6 L) were collected at each site. First sample was autoclaved ($120^{\circ}C$, 2.5 atm), second one was inoculated with glucose to stimulate the microbial activity, and the last sample was kept in the natural condition. Compared with other samples including autoclaved and natural samples, the glucose added sample showed sharp increase in its alkalinity after 15 days, cation concentration change such as Ca, Mg, and K seemed to increase in early stage, and then decrease 15 days later in slurry solution of glucose added sample, and a possibly considerable decrease in $SO_4^{2-}$ in the fly ash slurry samples when glucose was added to stimulate the microbial activity. Geochemical data of this study is likely to be related to the activity of bacteria at the ash pond. The result may be used to understand about the characteristic of bacteria.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.4
• /
• pp.321-328
• /
• 2006

A basic research was conducted on the mineral weathering and geochemical characteristics in the KURT (KAERI Underground Research Tunnel), which was recently constructed at a site in KAERI. Some rock samples exposed during the KURT construction were examined using a microscope and chemical analysis for some micro-changes of the rocks caused by the chemical weathering. The weathered granite has some small and fine cracks around the rock-forming minerals. In particular, there are a characteristic weathering of feldspar mineral and a preferential leaching of Ca component from the mineral dissolution. In addition, by the dissolution of biotite containing $Fe^{2+}$ component there were iron-oxides precipitates as secondary products into the microcracks of around minerals. The results also show that the micro-cracks initiated from the mineral interior are extended and connected into the larger cracks along the grain boundary with the progress of the weathering. Thus, it is considered that some chemicals dissolved from the fresh rock would be involved in the formation of secondary minerals and migrate interacting with them.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.419-428
• /
• 2013

The objectives of this research were to determine ecological characteristics and chemical gradients in two different loach populations-Misgurnus anguillicaudatus ($M_a$) and Koreocobitis rotundicaudata ($K_r$). Eight chemical parameters were compared to test the chemical preferences between the two species. The population of Kr occurred more in better water quality, compared to the $M_a$-population. The $M_a$-population co-occurred more with tolerant species (TS) and omnivores, whereas the $K_r$-population co-occurred more with sensitive species (SS) and insectivores. The differences in the tolerance and trophic composition matched well with the result of stream health assessment, based on the multi-metric model of Index of Biological Integrity (IBI). The IBI value in habitat with the $M_a$-population was "19.6" (range: 8~40) indicating a fair condition, and the IBI values of $K_r$-population was 29.4 (range: 12~40) indicating good condition. Similar results were found in physical habitat health analysis (QHEI). Overall, data analysis showed that the $M_a$-population belong to the tolerant species and $K_r$-population belong to sensitive species in the tolerance classification.

• The Korean Journal of Pesticide Science
• /
• v.6 no.1
• /
• pp.42-44
• /
• 2002

A very destructive lily disease was occurred at Daekwallyong alpine areas in 1999. We have performed experiments to identify the causal pathogen of lily disease and to find a way to control the disease chemically. Twelve fungal isolates from the infected lily were identified as Phytophthora cactorum. Mycelial growth of all isolates were completely inhibited on potato dextrose agar with $10{\mu}g/mL$ metalaxyl. Among 11 fungicides tested, $10{\mu}g/mL$ of dimethomorph, ethaboxam, and oxadixyl inhibited mycelial growth of P. cactorum. PC-1. Therefore, spray of phenylamide fungicides such as metalaxyl and other commercial fungicides should be a effective way to control the Phytophthora blight of lily.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.3
• /
• pp.19-32
• /
• 2002

This study is objected to identify the relations between surface- and shallow ground-water and the seasonal variation of their qualities in watersheds near Muju area. The water type shows mainly Ca-$HCO_3$type. Heavy-metal contamination of surface water is locally detected, due to the mixing with mine drainage. In October nitrate concentration is especially high in densely populated area. Cluster Analysis and Principal Component Analysis are implemented to interpret the complexity of the chemical variation of surface- and ground-water with large amount of chemical data. Based on the cluster analysis, surface-water was divided into five groups and ground-water into three groups. Principal Component Analysis efficiently supports the result of cluster analysis, allowing the identification of three main factors controlling the water quality. There are (1) hydrogeochemical factor, (2) anthropogenic factor and (3) heavy metal contaminated by mine drainage.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.65-70
• /
• 2015

This research examines the removal efficiency of benzene, toluene, xylene (BTX) and total volatile organic compounds (TVOCs) by flowing VOCs, which are generated at a petrochemical complex in the Ulsan area, in a sliding arc plasma (SAP) reactor. The SAP reactor process is composed of 5 steps and the analysis was conducted using a BTX detector and TVOC measuring instrument. The removal efficiency of BTX was better at high concentration than at low concentration and the emitted TVOC concentration increased in later steps of the reactor. In addition, the removal efficiency improved, as the flow velocity increased. The maximum permissible concentration of TVOCs in the first step was about 481 ppm and showed over 94.83% efficiency when it was operated in the 2nd step at concentrations beyond 481 ppm. Therefore, there are many factors for improving the removal efficiency of SAP reactors at low concentration and measures should be prepared according to the application method for the various types of industrial reactors.