• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.139-144
• /
• 2003

3차원 이상의 공간정보의 생성은 우리가 살아가는 현실공간을 입체적으로 조망해 볼 수 있는 가장 일반적인 요구사항이 되었고, 이를 여러 분야에서 다각적으로 활용하려는 연구가 활발히 진행되고 있다. 또한 3차원 이상의 조건을 부여하여 시공간에서 동영상으로 보여주기 위하여 3차원 지형 시뮬레이션을 제작할 수 있는 기술이 보편화 되고 있어 건설분야에서도 적극적인 도입으로 각종 공사계획 및 설계에 이용할 예정이다. 본 연구에서는 이러한 지형공간데이터의 생성을 위하여 원격탐사 데이터와 수치지형도를 이용하여 우리나라 3차원 데이터의 자성 방법과 그 결과를 비교하였으며, 그 결과 DEM에 의한 3차원 수치 기복영상과 위성영상의 합성에 의한 퓨전 영상의 3차원 적용을 통하여 향후 고해상도의 적용시 발생할 수 있는 입체영상의 문제점등을 사전확인 할 수 있었다.

• Journal of the Korean Geographical Society
• /
• v.34 no.3
• /
• pp.319-336
• /
• 1999

본 연구는 우리나라의 수치지형도에서 수치고도모형(DEM)을 개발하고자 할 때 고려해야 할 요인들을 분석하였다. 특히 DEM의 정확도에 결정적으로 영향을 미치는 내삽법의 과정을 지형적 유형(평지.계곡.산지)과 공간적 표본추출법(체계적추출법.군집형무작위추출법.복합점진적표본추출법)에 따라 구분하여 살펴 보았다. RMSE의 측정을 통해 크리깅 내삽법이 지형의 기복에 산관없이 정확도를 유지함녀서 DEM을 생성할 수 있는 방법으로 평가되었다. 그리고 표본추출법에 따라 공간적 표본 밀도를 달리한 낮은 표본을 대상으로 한 경우에 비해 낮게 나타났다. 또한 본 연구에서 제안한 복합 점진적 표본추출법을 적용한 DEM의 정확도는 다른 표본추출법을 적용한 경우보다 그 정확도가 향상됨을 확인하였고, 반면에 계산상의 효율성이 다른 방법에 비해 떨어지는 단점을 보였다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.131-135
• /
• 2010

우리나라는 산림이 울창하고 가연성 낙엽 등의 가연성 물질들이 많이 쌓여 있으며, 경사가 급하고 기복이 많은 산지로서 초기진화 실패 시 연소진행 속도가 빨라 급속히 확산 시키는 산악 형 산림으로서 산불 발생 시 진화가 어려워 산불의 확산 속도와 강도를 추정하기 어려운 실정이다. 현재 산불이 발생과 동시에 초기 진화에만 초점을 마치고 있는 시점에서 초기 진화에 실패했을 경우 산불이 확산되는 경로와 시간 등을 예측하여 최소한의 인력과 장비를 이용하여 진화하는 시스템을 구축할 수 있는 경우는 아직 우리나라에서는 미흡하다. 본 연구에서는 특정지역의 국부지형 기상인자(풍향, 풍속)를 측정하여 산불이 발생 시 인자별 특성에 따라서 산불의 진행 경로와 산불의 진화 시나리오를 예측할 수 있는 시스템을 구축하는데 그 목적이 있다.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.3
• /
• pp.27-39
• /
• 2016

This study statistically investigates relationships between physical properties of rocks and topography by measuring and analyzing section, topographical and measured parameters of 58 bedrock outcrops at areas covered by gneiss, schist, granite, andesite, sandstone and limestone in the Korean Peninsula. Multiple linear regression analysis suggests that the joint spacing, joint continuity, weathering grade and maximum joint width of rocks among the measured parameters are related to the topographical parameters with statistical significances. Therefore, this study suggests that rock properties such as joint spacing, joint continuity, weathering grade and maximum joint width seem to greatly influence topography, although various factors can affect topographical parameters.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.1
• /
• pp.1-16
• /
• 2016

This study estimates relationships between physical and chemical weathering indices of various rock types and topographical relief. Physical weathering properties such as rock strength and joint and chemical weathering indices such as the $SiO_2/Al2O_3$, CIA and WPI were analyzed from 18 rock outcrops in mountain and valley areas consisting of 9 rock types. The results indicate that the elevation and relief of topography increase physical strength of rock increases. It can be suggested that the total r(rock-mass strength rating) and R(rock rebound strength by Schmidt Hammer) are most useful indices as a quantitative weathering property factor to explain formative causes of topographical relief. The results also suggest that rock types such as sandstone, granite, gneiss and schist are most suitable to explain meaningful difference in topographical relief with the physical and chemical weathering indices.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.541-550
• /
• 2022

A pre-existing landform is created by weathering and erosion along the bedrock fault and the weak zone. A neotectonic landform is formed by neotectonic movements such as earthquakes, volcanoes, and Quaternary faults. It is difficult to clearly distinguish the landform in the actual field because the influence of the tectonic activity in the Korean Peninsula is relatively small, and the magnitude of surface processes (e.g., erosion and weathering) is intense. Thus, to better understand the impact of tectonic activity and distinguish between pre-existing landforms and neotectonic landforms, it is necessary to understand the development process of pre-existing landforms depending on the bedrock characteristics. This study used a two-dimensional numerical landscape evolution model (LEM) to study the spatio-temporal development of landscape according to the different erodibility under the same factors of climate and the uplift rate. We used hill-slope indices (i.e., relief, mean elevation, and slope) and channels (i.e., longitudinal profile, normalized channel steepness index, and stream order) to distinguish the difference according to different bedrocks. As a result of the analysis, the terrain with high erosion potential shows low mean elevation, gentle slope, low stream order, and channel steepness index. However, the value of the landscape with low erosion potential differs from that with high erodibility. In addition, a knickpoint came out at the boundary of the bedrock. When researching the actual topography, the location around the border of difference in bedrock has only been considered a pre-existing factor. This study suggested that differences in bedrock and various topographic indices should be comprehensively considered to classify pre-existing and active tectonic topography.

• Korean Journal of Remote Sensing
• /
• v.13 no.1
• /
• pp.57-73
• /
• 1997

This paper is related to the correction of radiometric distortions induced by topographic relief. RADARSAT SAR image data were obtained over the mountainous area near southern part of Seoul. Initially, the SAR data was geometrically corrected and registered to plane rectangular coordinates so that each pixel of the SAR image has known topographic parameters. The topographic parameters (slope and aspect) at each pixel position were calculated from the digital elevation model (DEM) data having a comparable spatial resolution with the SAR data. Local incidence angle between the incoming microwave and the surface normal to terrain slope was selected as a primary geometric factor to analyze and to correct the radiometric distortions. Using digital maps of forest stands, several fields of rather homogeneous forest stands were delineated over the SAR image. Once the effects of local incidence angle on the radar backscatter were defined, the radiometric correction was performed by an empirical fuction that was derived from the relationship between the geometric parameters and mean radar backscatter. The correction effects were examined by ground truth data.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.155-162
• /
• 1999

In the last few years the automatic classification of morpholgical landforms using GSIS and DEM was investigated. Particular emphasis has been put on the morphological point attribute approaches and the extraction of drainage basin variables from digital elevation models. The automated derivation of landforms has become a neccessity for quantitative analysis in geomorphology. Furthermore, the application of GSIS technologies has become an important tool for data management and numerical data analysis for purpose of geomorphological mapping. A process developed by Dikau et al, which automates Hanmond's manual process, was applied to the pyoung chang of the kangwon. Although it produced a classification that has good resemblance to the landforms in the area, it had some problems. For example, it produced a progressive zonation when landform changes from plains to mountains, it does not distinguish open valleys from a plains mountain interface, and it was affected by micro relief. Although automating existing quantitative manual processes is an important step in the evolution automation, definition may need to be calibrated since the attributes are oftem measured differently. A new process is presented that partly solves these problems.

• Journal of the Korean Geographical Society
• /
• v.32 no.4
• /
• pp.435-444
• /
• 1997

Bars in a river bed show the flow of the river, the shape of a river bar can be easily measured in any river. The purpose of this study is to research the morphological characteristics of river bars. The case study area is the lower Golgi River, six bars were examined. All six bars are gravel bars with a grain size in excess of 2 millimeters. Four of the bars are longitudinal bars, in which the direction of the bar follows the river current. After analyzing the gravel in the bars, it was determined that as the gravel flows down the river, gravel grain size decreases while grain roundness increases. The shape of bar varies locally according to flow regime, channel slope, and w/d ratio.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.3
• /
• pp.83-92
• /
• 2011

The properties and changes of geomorphic relief and coastal deposits were analyzed at Goreabul sand beach in Yeongdeok-gun, the largest that in east coast of Kyungsangbuk-do Province. As the result of grain size analysis, in almost season except summer, the sands mainly deposited in Goraebul sand beach because longshore current drift northward contrary to Gangwon-do east coast, and summer longshore current is weak or change direction to south ward. Sand beach mostly came form erosion owing to typoon and storm and was deposit more coarse sand in the summer, and was produced deposition actively in the fall and winter. Front side of sand dune came from deposition on sand every season by sea breeze, especially in the winter.