• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.613-618
• /
• 2008

본 연구에서는 개수로 마찰흐름 특성에 관한 연구로서 유량조사사업단(2006)의 우리나라 3대강 유역 하천자료와 미국의 Colorado지역 록키산맥 하천 관측자료를 통하여 개수로의 흐름특성을 집중적으로 검토하였다. 개수로 설계에 있어 수로의 흐름해석 및 마찰계수의 정확한 산정은 수로설계의 근간이 된다. 하지만 일반적으로 사용하고 있는 Manning(1889)식은 개수로 흐름특성을 판단하기에 너무 단순하여 상이한 결과를 보임에도 불구하고 단순성에 기인하여 사용되는 것으로 판단된다. Bazin(1865)과 Varwick(1945)의 개수로 실험결과를 보면 Nikuradse(1933)의 원형관수로 실험결과와 마찬가지로 층류, 천이층류, 완난류, 천이난류, 전난류 등 다섯 가지의 흐름특성이 존재함을 알 수 있다. 또한, 개수로 마찰계수의 특성변화를 보면 조고 또는 조도가 증가함에 따라 마찰계수가 상향으로 평행 이동하는 것을 볼 수 있다. 실험결과로부터 확인되는 이러한 흐름 특성이 현장에서도 분명히 나타날 것으로 판단하며 이러한 가설에 근거하여 각 하천의 관측자료를 분석하였다. 유량조사사업단의 우리나라 3대강 유역 하천 관측자료(2006)를 레이놀즈수의 함수인 완난류 흐름으로 전제하고 물의 기본적인 성질과 하천의 경사, 수심, 조고 등의 영향을 고려한 무차원수를 도입하여 마찰계수의 2차적인 분포특성을 파악하고자 하였다. 하지만 관측된 자료로부터 무차원수를 도입하여 산정된 마찰계수분포를 보면 마찰계수가 급격히 증가하고 추정된 유속과 관측된 유속을 비교하면 추정된 유속이 산개되는 경향이 나타났다. 이러한 문제점은 유량관측시 관측지점의 수면경사 및 하상경사의 미관측으로 하천정비기본계획상에 제시된 지형으로부터 하상경사를 추정하여 마찰계수와 유속을 산정하였다. 또한 하천정비기본계획상에 제시된 Manning의 조도계수를 이용하여 Ganguillet&Kutter(1869) 산정식과 Manning(1889) 산정식으로 부터 유속을 산정한 결과 오차가 크게 발생한 것을 확인하였으며, 실제 관측자료에 적합하도록 조도계수를 재 산정하였다. 논문의 분량 제한상 분석과정은 추후 논문에 제시하기로 하고 분석결과와 수위관측에서의 문제점을 제시하였다.

• The KIPS Transactions:PartB
• /
• v.12B no.2 s.98
• /
• pp.157-166
• /
• 2005

In 3D virtual environment the description of character' s movement that has utilized the conventional key-frame technique is gradually being developed toward the application of motion control method to generate more realistic and natural motion. Even the motion control method, however, has the limitation for expression of character's motion adapted to the ground properties of virtual world. That is, the walking motions of character are not only, for the most part, so uniform simple and repeated often as to feel to be tedious, but also the unnatural motion in which the tips of the toes soak through a plane or float in the air discording with the conditions of terrain lowers the semblance of reality. This paper proposes an adaptive motion control method for human figure locomotion in virtual environments or games, in which the walking motion is dynamiccally adapted to the ground's sliding properties. We compute an optimal parameters for one cycle of walking motion adapted to the ground properties by combining the coefficient of friction and centripetal force, and therefrom we induce a set of nonskid speed corresponding to various sliding properties of the ground.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.2
• /
• pp.35-39
• /
• 2009

Purpose: In this study a program was developed to determine corneal aberrations using corneal shape of topographer and represented a wavefront and corneal aberrations using zernike polynomial. Methods: When the pupil size was 6 mm, we calculated new corneal shape data with zernike polynomials using corneal shape data of ORBSCAN topographer. We programmed the wavefront construction using ray tracing for corneal shape, then represented corneal aberrations having zernike polynomial with 6th order and 28 terms. Conclusions: We developed programs to determine a wavefront and corneal aberrations using corneal shape of ORBSCAN topographer. Theses results will be applied to a development of new topographer and prescription of contact lens and OK lens.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.439-449
• /
• 2016

The methodology of synthetic unit hydrograph using geomorphic characteristics was suggested. Six geomorphic components over 19 watersheds were used to estimate synthetic unit hydrograph and the test watersheds were classified into two groups on the basis of the area of $200km^2$. The regression formulas between standardized geomorphic characteristics for each group and peak quantities of specific streamflow and time of representative unit hydrograph were suggested and the Nash and the Clark unit hydrographs were derived. For verifying the derived unit hydrographs, the resulting hydrographs were compared with the ones using the existing Clark unit hydrographs based on the empirical parameter estimation for the 145 storm events during 2010 to 2011 for the additional six watersheds. The results showed the relatively higher performance over the existing synthetic unit hydrograph methods, which could be a contribution to the hydrologic estimation in ungauged watersheds.

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.255-263
• /
• 2006

In an electrical tomographic survey using an inclined borehole with a pole-dipole array, we must consider several factors: a singular point associated with zero potential difference, a spatial discrepancy between electrode and nodal point in a model due to a inclined borehole, and a variation of geometric factors in connection with a irregular topography. Singular points which are represented by the normal distance from current source to the ground surface can be represented by serveral regions due to a irregular topography of ground surface. The method of element division can be applied to the region in which the borehole is curved, inclined or the distance between the electrodes is shorter than that of nodal points, because the coordinate of each electrode cannot be assigned directly to the nodal point if several electrodes are in an element. Test on a three-dimensional (3-D) synthetic model produces good images of conductive target and shoves stable convergence.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.111-118
• /
• 2002

These days, surveying instruments are developing rapidly and the precision is improving continuously. The building of three dimensional terrains of high precision are possible and the calculation of the areas or the volumes have high precision due to the development of the technique of the spatial information system using computer. But actually, in construction site they calculate two-dimensional area using the traditional method, plate table surveying, planimeter, and then get three-dimensional area through multiplying two-dimensional area by the slope correction factor. In this study, we show the defect and inefficiency of the calculation of area by the traditional methods and survey the area with Electric Distance Measurement and GPS instrument. With this data, we made the three dimensional terrain model and calculated two-dimensional area, three-dimensional area. After that, we compared areas that calculated by algorithm of triangulated irregular network and analysis of grid method with standard area that calculated by the traditional method. Finally, this paper suggested more effective and precious method in calculating three-dimensional area.

• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.241-250
• /
• 1999

Reflection coefficients of the seafloor have been calculated from the amplitude ratio of secondary to primary water bottom reflection in seismic data obtained from Bransfield Strait, Antarctic Peninsula. Test processing for the coefficients shows that moving average is effective to reduce severe fluctuation of the coefficient measured at each point. Relationship between the coefficients and the properties of water bottom is analyzed to illuminate geological environment. In the central Bransfield Basin, the magnitude of reflection coefficients decreases as it is distant from the sedimentary sources. Reflection coefficients range from 0.12 to 0.2 near the continental slope of the basin, and from 0.1 to 0.12 in the basin floor. In the western Bransfield basin, reflection coefficients between 0.2 to 0.3 are obtained from the area eroded by glacial movement. On the volcanic structures near Deception Island, the coefficients show relatively high values more than 0.2. Paleo-geological structures uplifted by tectonic movement and outcropped by glacial erosion have relatively high coefficients.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.273-284
• /
• 2002

The Gravity-Geologic Method (GGM) was implemented for bathymetric determinations in the Drake Passage, Antarctica, using global marine Free-air Gravity Anomalies (FAGA) data sets by Sandwell and Smith (1997) and local echo sounding measurements. Of the 6548 bathymetric sounding measurements, two thirds of these points were used as control depths, while the remaining values were used as checkpoints. A density contrast of 9.0 gm/㎤ was selected based on the checkpoints predictions with changes in the density contrast assumed between the seawater and ocean bottom topographic mass. Control depths from the echo soundings were used to determine regional gravity components that were removed from FAGA to estimate the gravity effects of the bathymetry. These gravity effects were converted to bathymetry by inversion. In particular, a selective merging technique was developed to effectively combine the echo sounding depths with the GGM bathymetiy to enhance high frequency components along the shipborne sounding tracklines. For the rugged bathymetry of the research area, the GGM bathymetry shows correlation coefficients (CC) of 0.91, 0.92, and 0.85 with local shipborne sounding by KORDI, GEODAS, and a global ETOPO5 model, respectively. The enhanced GGM by selective merging shows imploved CCs of 0.948 and 0.954 with GEODAS and Smith & Sandwell (1997)'s predictions with RMS differences of 449.8 and 441.3 meters. The global marine FAGA data sets and other bathymetric models ensure that the GGM can be used in conjunction with shipborne bathymetry from echo sounding to extend the coverage into the unmapped regions, which should generate better results than simply gridding the sparse data or relying upon lower resolution global data sets such as ETOPO5.

• Spatial Information Research
• /
• v.15 no.4
• /
• pp.397-406
• /
• 2007

2D hydraulic models of urban areas are at the forefront of current research of flood inundation mechanisms, but they are constrained by inadequate parameters of topography and insufficient data. In this paper a numerical model based on DEMs is presented to represent overflow waters due to bank break in urban areas. The surface flow in the building areas is assumed to be properly modeled by solving Saint-Venant equation. In order to represent flooding broken out in Samcheok city, 2002, hydraulic model test using tracer has been carried out and validated. These efforts will serve for making flood hazard map and for estimating economic loss due to inundation of personal properties in urban areas.

• Journal of the Korean Geographical Society
• /
• v.32 no.4
• /
• pp.435-444
• /
• 1997

Bars in a river bed show the flow of the river, the shape of a river bar can be easily measured in any river. The purpose of this study is to research the morphological characteristics of river bars. The case study area is the lower Golgi River, six bars were examined. All six bars are gravel bars with a grain size in excess of 2 millimeters. Four of the bars are longitudinal bars, in which the direction of the bar follows the river current. After analyzing the gravel in the bars, it was determined that as the gravel flows down the river, gravel grain size decreases while grain roundness increases. The shape of bar varies locally according to flow regime, channel slope, and w/d ratio.