• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1151-1156
• /
• 2001

In this paper, the electric field distribution and directivity on human head caused by portable phone is analyzed. An analysis model is composed of a human head model and the antenna mounted on the same ground plane as portable telephone size. The QMSA to load a capacitor without limitation of the electric force is used In the computational model to apply to the antenna mounted on portable phone. This antenna is designed to operate in the near of frequency 2.0㎓, is observed the radiation characteristics of the antenna and their variations as a function of distance from the human head.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.628-631
• /
• 2006

This paper explains about the design, fabrication, and measurement of directional dipole antenna for MMDS. The proposed dipole antenna is an electric wave guide with a director at $\lambda/4$ distance and is also designed to have directivity. The high gain antenna is realized by using a reflector at $45^{\circ}degree$. The fabricated antenna shows the return loss of -35dB at the center frequency 2.06GHz and also has the bandwidth of about 310MHz (>15%) under the condition of VSWR<2. The gain of dipole antennas is 11.5dBi.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.217-223
• /
• 2013

A digital retrodirective antenna system is easy to modify and upgrade because it can control the phase information of the output signal toward opposite direction to input signal without a priori knowledge of the arrival direction. Due to this advantage, it is possible to perform fast beam tracking. In this paper, a design digital retrosirective array antenna system according to the number of antenna array by using only one digital PLL which finds angle of delayed phase and we test BER performance of this system. When we transmit data at actual communication system, the data modulated onto carrier frequency in order to shift spectrum from base band to another band. So we simulate system considering carrier frequency according to the number of antenna array. As a result, carrier frequency has no impact on the performance.

• Composites Research
• /
• v.37 no.1
• /
• pp.53-57
• /
• 2024

Numerous studies have explored structural antennas for integrating advanced wireless systems into aircraft without altering their external form. However, much of the research on structural antennas has focused on patch antennas, which are characterized by limitations such as narrow frequency bands and low directivity. In contrast, the Vivaldi antenna, widely utilized in wireless applications, offers the advantages of a wide frequency band and high directivity. Nevertheless, its application to aircraft has been challenging due to radiation direction constraints. In this study, we endeavor to address this issue by proposing the application of the antenna patch onto the honeycomb wall, thus enabling the use of the Vivaldi antenna on aircraft. The impact of the honeycomb structure on antenna radiation performance was analyzed, and the potential of the honeycomb Vivaldi antenna was validated through simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.691-697
• /
• 2016

In this paper, we propose the antenna to appropriate for a UWB communication system, and it meets characteristics for location recognition in predetermined range. Proposed tapered slot antenna was designed through the HFSS simulation tool of Ansys. Inc., it was produced by Taconic TRF-45 based on dielectric constant of 4.5, loss tangent 0.0035, thickness 1.62mm. The tapered slot antenna is analyzed the standing wave ratio and reflection coefficient, radiation pattern in the frequency domain. The impedance bandwidth range of the produced tapered slot antenna is from 3.8 ~ 8.9GHz to 5.1GHz, E-plane and H-plane radiation pattern meet directional antenna characteristics for indoor and outdoor location recognition in predetermined range. The antenna gain is 7.4 dBi(6GHz)in the simulation, the result of measurement demonstrated 7.4 dBi(6 GHz) of antenna maximum gain. Proposed tapered slot antenna meets UWB communication system but simulated and measured results were slightly different.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.74-80
• /
• 2004

This paper presents analysis and design for Microstrip antennas using FEM (Finite Element Method). For the miniaturization of the antennas, dielectric substrate (ε/sub r/=4.6) and rectangular patch structure are used. The proposed Microstrip antennas are simulated using commercial simulator (HFSS). The results of the simulation are presented and compared with characteristics of each array type. Especial, the proposed antennas can be applied to the design of various communication systems for 2.4 GHz band.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1169-1176
• /
• 2018

The C-band omni-directional antenna for drone control is mounted on the top or bottom and used to configure the communication link. The communication link is affected by the LOS depending on the mounting position of the omni-directional antenna. In this paper, two kinds of embedded antennas were designed with a commercial simulation tool CST MWS, and EM analysis was performed to consider the mounting environment. Also, we propose the PTMP ground antenna to control a large number of drones. The ground antenna has a communication link of 30km, and it consists of four sector antennas in the horizontal direction and one directional antenna at the top.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.917-920
• /
• 2007

무선 Ad-hoc 네트워크에서는 주로 IEEE 802.11 MAC 프로토콜을 이용한다. IEEE 802.11 MAC 프로토콜은 제어 메시지인 RTS-CTS를 통해서 채널 예약을 하고 데이터를 전송하는 방식으로 모든 통신에 Omni-directional 안테나를 이용하여 전송한다. 본 논문에서는 기존 IEEE 802.11 MAC 프로토콜보다 성능을 향상시키기 위해서 directional 안테나를 이용한 MAC 프로토콜을 사용한다. Directional 안테나를 사용한 MAC 프로토콜은 IEEE 802.11 MAC 프로토콜에 비해서 Spatial Reuse를 증가함으로서 채널 자원을 더욱 효율적으로 사용하는 것이 가능하다. 또한 Directional 안테나의 사용은 안테나의 지향성에 따른 안테나 이득 및 전송 범위의 증가 그리고 전송 범위를 Omni-directional 안테나와 동일하게 적용할 경우에는 저 전력 통신이 가능하다는 장점을 가지고 있다. 그러나 Directional 안테나의 사용은 IEEE 802.11 MAC보다 좋은 성능을 갖기는 하지만 새로운 문제들이 발생한다. 이러한 문제들로는 New Hidden Terminal, Deafness, Capture, 그리고 위치 인식에 관련된 문제들이 발생한다. 본 논문에서서 위에서 언급한 Directional 안테나의 이점과 그리고 문제점에 대해서 설명하고, 이러한 문제들 중에 Deafness 문제를 완화시킬 수 있는 방법을 제안한다. 그리고 QualNet 4.0을 이용한 시뮬레이션을 통해서 제안된 프로토콜의 성능을 평가한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.253-259
• /
• 2003

This paper presents the basic characteristics of a 5 element dipole array antenna which has a four parastic element and one driving element at the center of the circular array. The coupled integral equations for the unknown current distributions on dipole elements are derived and solved by applying Galerkin's method of moments. The numerical results show that the highest power gain of 7.8 dBi is obtained at radius of d = 0.3lλ when two short circuited parastic element neighbors. In order to verify the theoretical analysis, the radiation pattern is compared with Preston's results.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.848-849
• /
• 2012

IEEE 802.15.3c 는 IEEE 802.15.3 WPAN 에 mmWave(millimeter wave) 기반 물리 계층의 표준화를 하는 것을 목적으로 하며, 사용 대역의 특성상 지향성(directional) 안테나를 이용해서 통신을 한다. 또한 하나의 노드를 중심으로 피코넷을 형성하고 그 피코넷 내에서 peer 노드들 간 직접 통신을 위해서 peer 노드를 발견하는 효율적인 기법이 요구된다. 본 논문에서는 지향성 안테나를 사용하는 IEEE 802.15.3c 의 특성을 고려한 효율적인 이웃 발견 기법을 제안한다.