• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.381-384
• /
• 2005

암반의 단열은 현재까지의 대상암석에 기록된 변형이력의 하나로서, 이는 지하수유동이나 암반의 안정성 해석에 중요한 정보가 된다. 본 연구에서는 대전 유성지역의 암반의 단열 파악을 목적으로, 초음파 텔레뷰어(BHTV) 검층 자료를 선정하여 D/B를 구축하였다. 구축한 D/B를 토대로 시추공의 속성 자료를 3차원 가시화하여 단열분포에 대한 이해를 증진시키고자 하였으며, 3차원 가시화는 GIS의 소프트웨어인 ArcGIS의 AML (ArcMacro Language)을 이용하여 표현하였다. 이러한 연구방법을 통하여 사용자는 암반의 단열 분포를 정확하고, 효과적으로 파악할 수 있을 것이다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2007.03a
• /
• pp.311-324
• /
• 2007

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2012.05a
• /
• pp.333-334
• /
• 2012

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.237-240
• /
• 2000

서울시 암반 지하수의 수리지구화학 및 오염 특성을 토지 이용 특성과 관련하여 시.공간적 측면에서 체계적으로 고찰하고자 3년간에 걸친 모니터링을 수행하고 있다. 본 논문에서는 1차년도 취득 자료에 대한 예비 고찰 결과를 소개한다. 서울시 암반 지하수의수질 유형은 Ca-HCO$_3$ 유형으로부터 Ca-Cl(-NO$_3$) 유형에 걸쳐 폭넓게 분포한다. 서울시 동부 지역 지하수의 경우, 중랑천을 중심으로 상류에서 하류 지역으로 가면서 용존고체함량(TDS)이 높아지는 경향이 있다. K, Ca, Mg 등 주요 양이온과 Ba, Fe, Sr 등 미량원소도 유사한 공간적 분포 특성을 보여준다. 이러한 수질 항목은 대체적으로 지하수 유동에 수반된 수/암 반응의 증가를 잘 반영하는 것으로 해석된다. 반면, NO$_3$, Cl 등 음이온의 변화는 다소 불규칙하여 지역적인 토지이용 특성과 관련한 오염 요인의 기여를 반영한다. 한편, 도시 특성에 따라 서울시 암반 지하수의 수질특성을 전반적으로 고찰한 결과, 외곽의 비오염 지역에 비하여 중심부의 교통혼잡 지역, 남서부의 공단 지역, 서부와 남부의 농업 지역에서 뚜렷한 수질 저하를 보여주었다. 이러한 경향은 특히 Na, Cl, NO$_3$, SO$_4$, Ni, Pb, Se 등의 수질 항목에서 뚜렷하게 나타난다.

• Journal of the Korean Society of Groundwater Environment
• /
• v.2 no.1
• /
• pp.14-21
• /
• 1995

Colloids such as exogenous biocolloids in a bioremediation operation can enhance the transport of contaminant in ground water by reducing retardation effects. Because of their colloidal size and favorable surface conditions in addition to their low density, bacteria can act as efficient contaminant carriers. When mobile bacteria are present in a subsurface environment, the system can be treated as consisting of three phases: water phase, bacterial phase, and the stationary solid matrix phase. In this work, a mathematical model based on mass balances is developed to describe the facilitated transport and fate of a contaminant in a porous medium. Bacterial partition between the bulk solution and the stationary solid matrix, and the contaminant partition among the three phases are represented by the equilibrium relationships. Solutions were obtained to provide estimates of contaminant and bacterial concentrations. A dimensionless analysis of the transport model was utilized to estimate model parameters from the experimental data. The model results matched with experimental data of Jenkins and Lion (1993). The presence of mobile bacteria enhances the contaminant transport. However, bacterial consumption of the contaminant which serves as a bacterial nutrient, can attenuate the contaminant concentration.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.5
• /
• pp.29-40
• /
• 2009

In general, understanding groundwater flow in fractured bedrock is critical during tunnel and underground cavern construction. In that case, borehole data may be useful to examine groundwater flow properties of the fractured bedrock from pre-excavation until completion stages, yet sufficient borehole data is not often available to acquire. This study evaluated groundwater discharge rate into Jikri tunnel in Gyeonggi province using hydraulic parameters, groundwater level data in the later stage of tunneling, national groundwater monitoring network data, and electrical resistivity survey data. Groundwater flow rate into the tunnel by means of analytical method was estimated $7.12-74.4\;m^3/day/m$ while the groundwater flow rate was determined as $64.8\;m^3/day/m$ by means of numerical modeling. The estimated values provided by the numerical modeling may be more logical than those of the analytical method because the numerical modeling could take into account spatial variation of hydraulic parameters that was not possible by using the analytical method. Transient modeling for a period of one year from the tunnel completion resulted in the recovery of pre-excavation groundwater level.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.38-49
• /
• 2006

LNG storage in lined rock cavern demands various techniques concerned with rock mechanics, thermo-mechanics and hydrogeology in design, construction and maintenance stage. LNG pilot cavern was constructed in Daejeon in order to verify these techniques. In this paper, evaluation of drainage system and ice ring formation was studied by numerical simulation. By Modflow analysis in the viewpoint of aquifer and Seep/W analysis in the viewpoint of flow system, it was verified that the drainage system in the pilot cavern was efficiently operated. Since ice ring formation can be simulated by interactive relation between heat transfer and water flow, coupled analysis of those was performed. In this analysis, the position of ice ring was presumed and it was demonstrated that the formation is affected by velocity and direction of groundwater flow.

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.220-228
• /
• 2002

Thermal flow through jointed rock mass was analyzed by numerical methods. The effect of a single set of joints on the heat conduction was analyzed by one-dimensional model and compared with the analytical solution. When a joint is completely dry, the joint behaves as a thermal break inducing jumps in temperature distribution even at steady state. Therefore when joints are completely dry, individual joint has to be taken into consideration to get a good result. When joints are partially or fully saturated, the thermal conductivity of the joints increases drastically and the jumps in temperature distribution become less severe. Therefore the effect of joint in heat conduction can be well absorbed by continuum anisotropic model whose thermal properties represent overall thermal properties of the intact part and the discontinuities. Since the effect of joints becomes less important as the degree of the saturation increases, the overall thermal response of the rock mass also becomes close to isotropic. Therefore it can be concluded that a great effort has to be made to obtain a precise in-situ thermal properties in order to get a good prediction of the thermal response of a jointed rock mass.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1994.03a
• /
• pp.38-51
• /
• 1994

지하원유비축 기지 저장공동의 원유 유출이나 기화누설을 방지하기 위하여 지하수압을 조절하는 수벽공의 운영이나 공동주위 암반의 그라우팅 공법 설계에 있어서는 공동의 굴착으로 인한 주위 암반의 변형에 따른 투수계수의 변화와 지하수위의 변화에 대한 해석이 대단히 중요하다. 본 연구에서는 순간증압법을 이용한 삼축압축하의 암석의 투수계수 측정을 통하여 변형율과 투수계수와의 관계함수식을 구하였다. (중략)

• Journal of the Korean Geotechnical Society
• /
• v.18 no.6
• /
• pp.5-16
• /
• 2002

A hydrogeomechanical numerical model is presented to evaluate rainfall impacts on groundwater flow in slopes and slope stability. This numerical model is developed based on the fully coupled poroelastic governing equations for groundwater flow in deforming variably saturated geologic media and the Galerkin finite element method. A series of numerical experiments using the model developed are then applied to an unsaturated slope under various rainfall rates. The numerical simulation results show that the overall hydromechanical slope stability deteriorates, and the potential failure nay initiate from the slope toe and propagate toward the slope crest as the rainfall rate increases. From the viewpoint of hydrogeology, the pressure head and hence the total hydraulic head increase as the rainfall rate increases. As a result, the groundwater table rises, the unsaturated zone reduces, the seepage face expands from the slope toe toward the slope crest, and the groundwater flow velocity increases along the seepage face. From the viewpoint of geomechanics, the horizontal displacement increases, and the vertical displacement decreases toward the slope toe as the rainfall rate increases. This may result from the buoyancy effect associated with the groundwater table rise as the rainfall rate increases. As a result, the overall deformation intensifies toward the slope toe, and the unstable zone, in which the factor of safety against shear failure is less than 1, becomes thicker near the slope toe and propagates from the slope toe toward the slope crest. The numerical simulation results also suggest that the potential tension failure is likely to occur within the slope between the potential shear failure surface and the ground surface.