• Title/Summary/Keyword: 지표파

Search Result 272, Processing Time 0.03 seconds

중파 안테나를 이용한 R-Mode 공간파 저감 방안에 관한 연구

  • 정해상;전중성;국승기
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2021.11a
    • /
    • pp.8-9
    • /
    • 2021
  • 중파대역의 전파는 지표면을 따라 전파되는 지표파와 전리층에 반사되어 전파되는 공간파가 있다. 중파 R-Mode는 TOA추정을 통해 위치를 결정한다. 전리층에 반사되는 공간파를 수신할 경우 TOA 오차는 커질 수밖에 없다. 측위 정확도 향상을 위해 안테나 기반 중파 R-Mode의 수신성능을 향상하는

  • PDF

2 Dimensional FEM Elastic Wave Modeling Considering Surface Topography (불규칙 지형을 고려한 2차원 유한요소 탄성파 모델링)

  • Lee, Jong-Ha;Suh, Jung-Hee;Shin, Chang-Soo
    • Geophysics and Geophysical Exploration
    • /
    • v.4 no.2
    • /
    • pp.34-44
    • /
    • 2001
  • Forward modeling by construction of synthetic data is usually practiced in a horizontal surface and a few subsurface structures. However, in-situ surveys often take place in such topographic changes that the corrupted field data always make it difficult to interpret the right signals. To examine the propagation characteristic of elastic waves on the irregular surface, a general mesh generation code for finite element method was modified to consider the topography. By implementing this algorithm, the time domain modeling was practiced in some models with surface topography such as mound, channel, etc. The synthetic data obtained by receivers placed on surface also agreed with the analytic solution. The snapshots showing the total wave-field revealed the propagation characteristic of the elastic waves through complex subsurface structures and helped to identify the signals on the time traces. The transmission of Rayleigh waves along the surface, compressive waves, and sheer waves was observed. Moreover, it turned out that the Rayleigh waves behave like a new source at the edge.

  • PDF

Elastic Wave Modeling Including Surface Topography Using a Weighted-Averaging Finite Element Method in Frequency Domain (지형을 고려한 주파수 영역 가중평균 유한요소법 탄성파 모델링)

  • Choi, Ji-Hyang;Nam, Myung-Jin;Min, Dong-Joo;Shin, Chang-Soo;Suh, Jung-Hee
    • Geophysics and Geophysical Exploration
    • /
    • v.11 no.2
    • /
    • pp.93-98
    • /
    • 2008
  • Abstract: Surface topography has a significant influence on seismic wave propagation in a reflection seismic exploration. Effects of surface topography on two-dimensional elastic wave propagation are investigated through modeling using a weighted-averaging (WA) finite-element method (FEM), which is computationally more efficient than conventional FEM. Effects of air layer on wave propagation are also investigated using flat surface models with and without air. To validate our scheme in modeling including topography, we compare WA FEM results for irregular topographic models against those derived from conventional FEM using one set of rectangular elements. For the irregular surface topography models, elastic wave propagation is simulated to show that breaks in slope act as a new source for diffracted waves, and that Rayleigh waves are more seriously distorted by surface topography than P-waves.

Improvement of surface runoff lag algorithm in SWAT (SWAT 모형의 지표유출지체 알고리즘 개선)

  • Kim, Nam Won;Lee, Jeongwoo;Lee, Jung Eun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.299-299
    • /
    • 2016
  • 미농무성에서 개발된 유역수문모형 SWAT을 국내유역에 적용할 경우 일반적으로 일단위 유출 수문곡선의 첨두부가 관측치에 비해 과소하게 모의되는 경향이 있다. 본 연구에서는 이러한 원인에 대해서 고찰하고, 첨두부가 작게 모의되는 문제를 해결하기 위해서 지표유출의 지체와 관련된 서브루틴을 개선하였다. SWAT 모형에서는 지표유출의 지체는 운동파 집중시간(kinematic wave time of concentration)을 변수로 하는 지수형 감쇠함수를 사용하고 있다. 그러나 집중시간 계산식에서 지표유출에 기여하는 초과우량을 6.35mm/hr로 작은 고정값으로 가정하고 있어 큰 호우가 발생한 경우에도 집중시간이 길게 계산되는 구조를 가지고 있다. 이로 인해 지표유출의 지체 효과가 커서 첨두유량이 과소하게 산정되는 문제가 발생한다. 따라서 본 연구에서는 집중시간 계산시 고정값 6.35mm/hr 대신에 일 단위로 모의된 지표유출 발생량이 입력되도록 알고리즘을 수정하였다. 이 방법은 지표유출량의 크기에 따라 집중시간을 가변적으로 산정되게 함으로써 수문곡선의 첨두부를 보다 유연하게 구현할 수 있는 장점이 있다. 모형의 개선 효과를 평가하기 위해서 충주댐 상류유역을 대상으로 개선 전, 후의 일 단위 유출수문곡선의 첨두부를 비교하였으며, 그 결과 큰 홍수가 발생한 기간의 첨두유량이 10 % 이상 증가하는 것으로 분석되었다.

  • PDF

Euclidean Weight Distance as a Performance Measure for Backpropagation Neural Network Process Model (역전파 신경망 공정 모델의 평가지표로서의 유클리디언 웨이트 거리)

  • Kim, Byung-Whan
    • Proceedings of the KIEE Conference
    • /
    • 2001.07d
    • /
    • pp.2663-2665
    • /
    • 2001
  • 역전파 신경망은 반도체 공정 모델링에 효과적으로 응용이 되고 있으며, 최근 선형뉴런을 비선형 함수 대신 출력층에 이용하여 모델의 예측정확도를 향상 시킨 바 있다. 본 연구에서는 그 원인을 규명하기 위한 모델의 평가지표로서의 유클리디언 웨이트 거리(Euclidean Weight Distance)를 제안한다. 이 지표를 이용하여 신경망의 입력층과 은닉층, 그리고 은닉층과 출력층의 웨이트를 감시하였으며, 그 결과 예측정확도의 향상이 이 지표의 감소에 기인하고 있음을 알았다. 모델링에 이용한 실험데이터는 다중 유도결합형 플라즈마 장비로부터 Langmuir Probe 진단 시스템을 이용하여 수집하였다.

  • PDF

Detection of the Pipe Leak for Water Distribution System Using Ground Penetrating Radar (GPR을 이용한 상수관로의 누수 탐사)

  • Park, In-Chan;Cho, Won-Cheol
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1271-1274
    • /
    • 2006
  • 지하레이다(Ground Penetrating Radar, GPR)를 이용하여 지표하의 상수관로를 지표에서 송신안테나와 수신안테나를 이용해서 손쉽게 측정하게 된다. 송신안테나는 지표하에 전자기파를 송신하고 지하 매질을 투과한 파가 수신안테나에 도달하는 시간을 측정하여 지표하 매질의 특성을 파악할 수 있다. 수신파의 도달시간은 지표하 매질의 특성에 따라서 변화하며, 이를 통해 지표하 매질과 매질 깊이 등을 파악할 수 있다. 일반적으로 상수관로를 매설할 경우 관로 주변의 토양은 균등하게 되므로 기 매설된 상수관로 주변에 누수가 발생하게 되면, 관로 주변의 토양은 포화상태이거나 수압으로 인해서 공동이 형성될 경우가 많다. 이때 반사에너지의 유전율 증가 혹은 감소 특성으로 인해서 주변 매질과는 매우 상이한 결과를 보이게 된다. GPR탐사는 단순히 반사된 신호진폭의 크기를 나타내며 이러한 반사에너지의 크기에 관계되는 것은 매설물의 유전율이 주위 지반이 갖는 유전율과의 차이에서 기인하기 때문이다. 탐사 대상 상수관로에 대한 정보를 확보하여 GPR 탐사를 수행한 결과 관로 탐사를 위한 GPR의 결과는 매우 유용하게 사용될 것으로 판단되며, 이를 바탕으로 누수 발생 이력이 있는 다양한 관로주변 조건을 대상으로 탐사를 실시할 경우 상수관망시스템의 효율적인 관리 및 보수에 매우 유용한 방법이 될 수 있을 것으로 판단된다.

  • PDF

Void Ratio Evaluation of Unsaturated Soils by Compressional and Shear Waves (압축파와 전단파를 이용한 불포화토의 간극비 산정)

  • Byun, Yong-Hoon;Cho, Se-Hyun;Yoon, Hyung-Koo;Choo, Yun-Wook;Kim, Dong-Su;Lee, Jong-Sub
    • Journal of the Korean Geotechnical Society
    • /
    • v.28 no.12
    • /
    • pp.41-51
    • /
    • 2012
  • Soils are commonly unsaturated in the near surface. The stiffness of soils is affected by the amount of air and water. The objective of this study is to evaluate the porosity of the unsaturated soils by using the elastic waves including compressional and shear waves. The elastic waves are measured at different degrees of saturation by controlling the matric suction. Thus, the unsaturated soils are characterized at different levels of the matric suction. Shear and compressional waves are measured by using the bender elements and the piezo disk elements, respectively. Both transducers are installed on the walls of the rectangular cell. The unsaturated soils are prepared by using uniform size sands and silts. Test results show that both compressional and shear wave velocities change according to the matric suction. The elastic modulus, the shear modulus, and the Poisson's ratio are estimated based on the measured elastic wave velocities. In addition, the void ratio of the unsaturated soils estimated using elastic wave velocities matches well with the volume based void ratio. This study demonstrates that the elastic waves can be effectively used for the characterization of unsaturated soils.

The Evaluation of Class Design for the Computing Thinking Using Entry and Sensor Board (엔트리와 센서보드를 이용한 컴퓨팅 사고력에 대한 수업 설계 평가)

  • Mun, Sung-Yun;Lee, Hyuk Soo
    • The Journal of the Korea Contents Association
    • /
    • v.17 no.3
    • /
    • pp.571-577
    • /
    • 2017
  • Through the 2015 Revised Curriculum, programming education is introduced into the elementary school regular curriculum as part of the software education. Effective teaching & learning methods can be presented through an analysis of the effects of programming education on the problem-solving abilities. In this paper, students were divided into two groups according to their academic achievement, a learning program was developed for five times of implementation using the entry and the sensor board for the entry, and classes to which it was applied were conducted. Before and after the classes, a problem-solving test tool was used to measure and analyze the changes in Gamma waves and EEG concentration indicators. As a result, the gamma waves and the concentration indices of the students in the group with high academic achievement showed a tendency to be improved through the programming lessons, and those of the students in the group with poor academic achievement showed no such tendency. Through this, the necessity of the level-specific programming education in consideration of students' academic abilities was suggested.

Characterization of Shear Waves in Busan New Port Clay: Estimation of the Coefficients of Shear Wave Velocity (부산 신항 점토의 전단파 특성 연구: 전단파 속도 계수 추정 사례)

  • Lee, Jong-Sub;Kim, Youngseok;Hong, Seungseo;Yoon, Hyung-Koo
    • The Journal of Engineering Geology
    • /
    • v.23 no.4
    • /
    • pp.503-510
    • /
    • 2013
  • Shear wave velocity is widely used as an parameter for investigating subsurface characteristics and for obtaining the design parameters based on theoretical equations. This study seeks to estimate the coefficient of shear wave velocity in Busan clay via laboratory tests. Eight specimens were extracted at depths of 10, 12, 15, 20, 22, 25, 30, and 31 m. The specimens were subjected to the consolidation test to determine the relationship between effective stress and shear wave velocity. The relationship shows a non-linear trend and is similar to the results of a previous study. The coefficient shows constant coverage and a relationship between ${\alpha}$ and ${\beta}$ is suggested. The results demonstrate that this coefficient could be used as a reference value to determine engineering parameters based on the shear wave velocity.

Development of river flood prediction method utilizing water stage-discharge hysteresis (하천 이력현상 활용 하천 홍수예측 기법 개발)

  • Kim, Kyungdong;Kim, Dongsu
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.19-19
    • /
    • 2022
  • 하천에 발생하는 홍수를 예측하는 과정은 실무에서 많이 사용하는 HEC-HMS 와 같은 강우-유출 모형을 사용하여 산정한 하천의 강우빈도별 설계홍수량으로부터 HEC-RAS와 같은 수리학적 모형을 이용하여 홍수위를 산정하는 방법을 주로 의존하고 있다. 하지만 이러한 방법은 강우 강도를 통하여 하천에 발생하는 빈도별 유량으로 간접적으로 홍수위를 산정하기 때문에 실시간으로 발생하는 홍수위 또는 홍수 발생시간을 정확하게 알기 힘들다. 하지만, 최근 하천의 홍수파 또는 배수영향으로 인한 이력현상으로 하천의 수위-유량관계의 이력현상으로 인해 발생하는 유량자료의 오차를 줄이기 위해 수위관측소에 H-ADCP 초음파 센서를 활용한 자동유량측정장치를 설치, 운영하여 실시간으로 유량자료를 관측하고 있다. 이러한 자동유량측정장치에서 측정하는 유량자료는 H-ADCP에서 지표유속으로부터 유량자료를 산정하는데, 홍수파 또는 배수영향으로 지표유속, 유량, 수위의 수문곡선에 발생하는 이력현상을 관측 가능하다. 관측된 수문곡선의 이력현상은 유속, 유량, 수위 순으로 첨두의 발생시간이 나타나는데, 유속의 첨두 발생시간과 수위의 첨두 발생시간은 수문곡선의 형태 또는 규모에 따라 달라진다. 따라서 본 연구에서는 기존의 강우-유출 모의에 의존한 홍수예보기법을 보완하여 더 정확한 홍수위, 홍수 발생시간을 예측하고, 홍수예경보 시스템에 정량적인 기준을 제시할 수 있도록, 하천에 발생하는 수문곡선의 첨두유속과, 첨두수위의 발생시간, 규모를 분석하여 둘의 관계를 제시하고자 한다. 분석방법으로는 대상유역으로 이력현상이 발생하는 영산강유역에 위치한 남평교, 나주대교 두 지점을 선정하고 자동유량관측소 관측자료인 지표유속, 수위자료를 취득한다. 취득한 자료로부터 지표유속의 첨두 값과, 수위의 첨두 값, 지표유속의 첨두지점으로부터 수위의첨두지점 까지 발생하는 시간을 홍수 사상별로 정리하여 첨두유속-첨두수위, 첨두유속-첨두수위발생시간의 관계그래프를 산정하였다. 남평교의 경우 유속-수위의 이력범위는 거의 없었다. 나주대교의 경우 유속-수위 이력범위가 현저히 나타나 관계를 분석하기 용이 하였다. 하천에 이력현상이 현저히 나타나는 경우 첨두유속-첨두수위, 첨두유속-첨두수위발생시간의 관계가 뚜렷하게 나타나고 이러한 결과를 바탕으로 하천의 홍수예경보 판단의 정량적 기준을 제안하였다.

  • PDF