• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.723-730
• /
• 2012

The radar cross section(RCS) of a trihedral corner reflector(TCR) should be accurately computed when it is used as an external calibration target for a satellite synthetic aperture radar(SAR) calibration campaign. This paper presents the RCS analysis on a trihedral corner reflector which is installed on a calibration site, using the wave reflection from the rough surface and the wave diffraction from the TCR edges. The results in this paper show quantitatively the effect of the front surface on the RCS of a TCR. The difference of the RCS between a TCR in air and a TCR on a ground surface is computed by including the interaction term which consists of the edge diffraction from the TCR edges and the surface reflection from the front rough surface. The reflection coefficient of a randomly rough surface is a function of the surface roughness and dielectric constant of the surface. The RCS of $10{\lambda}$ size TCR on a ground is 0.46 dB higher than TCR in air at 9.65 GHz, and this can reach at maximum 1.55 dB depending on a surface condition and TCR size. The effect of the front surface on the RCS of a TCR increases, as the surface roughness decreases, the soil moisture increases, and the size of TCR in wavelength decreases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2C
• /
• pp.109-120
• /
• 2006

SPT-Uphole test is a seismic field test using receivers on ground surface and a SPT (Standard penetration test) source in depth. Even though this method is simple and economic, it makes hesitate to apply in real field that it is difficult to obtain reliable travel time information of shear wave because of the characteristics of SPT impact source. To overcome this shortcoming, in this paper, modified SPT-Uphole method using two component surface geophones was suggested. Numerical analysis was performed using finite element method for understanding the characteristics of surface motion induced by in-depth vertical source, and comparison study of the various methods which determine the travel time information in SPT-Uphole method was performed. In result, it is thought that the most reasonable method is using the first local maximum point of the root mean square value signals of vertical and horizontal component in time domain. Finally, modified SPT-Uphole method using two component surface geophones was performed at the site, and the applicability in field was verified by comparing wave velocity profiles determined by the SPT-Uphole method with the profiles determined by SASW method and SPT-N values.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.8-9
• /
• 2021

중파대역의 전파는 지표면을 따라 전파되는 지표파와 전리층에 반사되어 전파되는 공간파가 있다. 중파 R-Mode는 TOA추정을 통해 위치를 결정한다. 전리층에 반사되는 공간파를 수신할 경우 TOA 오차는 커질 수밖에 없다. 측위 정확도 향상을 위해 안테나 기반 중파 R-Mode의 수신성능을 향상하는

• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.329-335
• /
• 2001

The analytical model of the ground wave can be used for the prediction of the noise level from a source above a plain and homogeneous ground surface with no obstacles nearby. Sound propagation along the surface of the ground can be affected by the roughness of the ground surface and the direction of the wind. The effects of the ground surface and the wind can be formulated in terms of the ground coefficient and the noise source parameter. Upward and downward conditions can also be addressed by considering the direction of the wind. The ground coefficient and the noise source parameter are estimated using the measured noise levels of two points under particular environmental condition, and the noise levels of arbitrary points under the same environmental condition can be estimated. The proposed method can be utilized to estimate the noise level of specific noise environment and its validity was confirmed with the results of actual field measurement.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2003.05a
• /
• pp.74-77
• /
• 2003

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.167-178
• /
• 2007

Based on the kinematic wave equations, the influence of moving rainstorms on the surface runoff were analyzed with a focus on the rainfall distribution types. Applied hypothetical rainfall distribution types of moving rainstorms used are uniform, advanced, delayed and intermediate type. The moving rainstorm velocities applied in this study were $0.125{\sim}2.0m/s$ of moving upstream and downstream direction of plane surface. Simulations were undertaken by varying the rainfall distribution type, moving rainstorm velocity and moving direction, and the results were compared with that of stationary rainfall. The results indicate significant differences in peak discharges and hydrograph shapes for moving rainstorms of various rainfall patterns and moving directions. It shows that the moving rainstorms of downstream direction generate the largest peak runoff at all rainfall distributions. The sensitivity of runoff to rainfall distribution types decreases as storm velocity increases. It is clear that faster rainstorm velocity generates faster peak time and becomes thin hydrographs rapidly.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.27-36
• /
• 2012

The water in surface of the earth is frozen under freezing point. The freezing phenomenon, which causes the volume change of soils, affects on the behavior of soils and causes the significant damage on the geotechnical structures. The purpose of this study is to investigate the characteristics of elastic waves in sand-silt mixtures using small size freezing cells, which reflect the frozen ground condition due to temperature change. Experiments are carried out in a nylon cell designed to freeze soils from top to bottom. Bender elements and piezo disk elements are used as the shear and compressional wave transducers. Three pairs of bender elements and piezo disk elements are placed on three locations along the depth. The specimen, which is prepared by mixing sand and silt, is frozen in the refrigerator. The temperature of soils changes from $20^{\circ}C$ to $-10^{\circ}C$. The velocities, resonant frequencies and amplitudes of the shear and compressional waves are continuously measured. Experimental results show that the shear and compressional wave velocities and resonant frequencies increase dramatically near the freezing points. The amplitudes of shear and compressional waves show the different tendency. The dominant factors that affect on the shear wave velocity change from the effective stress to the ice bonding due to freezing. This study provides basic information about the characteristics of elastic waves due to the soil freezing.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.5
• /
• pp.5-14
• /
• 1994

In this study, the ground impedance is measured using the standing wave method in a free field on the grass, the soil, and the ground covered with asphalt and cement. And the excess attenuation of sound is investigated. Results are obtained in the frequency range between 300Hz and 1000Hz. There are very good agreements between the results of the measured ground impedance and the prediction of Delanyand Bazley. The ground impedance is increased in order the grass, the soil, the asphalt and the cement road, decreased with frequency for each the ground. The excess attenuation of sound is mainly determined by the ground impedance. The experimental results of the excess attenuation over the different types and the microphone heights are compared with the theoretical values.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.5
• /
• pp.472-479
• /
• 1999

In this paper, we propose a land cover pattern classifier for remote sensing image by using neuro-fuzzy algorithm. The proposed pattem classifier has a 3-layer feed-forward architecture that is derived from generic fuzzy perceptrons, and the weights are con~posed of h u y sets. We also implement a neuro-fuzzy pattern classification system in the Visual C++ environment. To measure the performance of this, we compare it with the conventional neural networks with back-propagation learning and the Maximum-likelihood algorithms. We classified the remote sensing image into the eight classes covered the majority of land cover feature, selected the same training sites. Experimental results show that the proposed classifier performs well especially in the mixed composition area having many classes rather than the conventional systems.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.219-219
• /
• 2011

순 장파복사량은 지표면으로 입사되는 하강 장파복사량(Downward Longwave Radiation, $R_{ld}$)과 지표면에서 반사되는 상승 장파복사량(Upward Longwave Radiation, $R_{lu}$)의 차이로 정의되는데 이는 에너지 수지 및 농업기상 연구의 중요한 주제 중 하나로서 다루어져 온 순복사량의 중요한 요소이다. 일반적으로 $R_{lu}$의 경우 지표면 온도와 방사율(emissivity)를 이용하여 산출되므로 정확히 추정이 가능하나, $R_{ld}$의 경우 대기 최상층에서 관측되는 방사량과 지표면 근처의 방사량을 함께 고려해야 하므로 실측이 어렵다. $R_{ld}$는 야간 복사계(pyrgeometer)를 이용하여 직접적으로 측정할 수 있지만 관측기기 자체가 구비되어있는 관측소가 적어 매우 드물게 이용된다. 또한 단파 복사 에너지 측정 기기에 비해 비용이 많이들고 종종 관측값이 큰 오차를 가지고 있기 때문에 실무에 적용하기 힘든 단점이 있다. 따라서 기상 관측소에서 얻어지는 증기압과 온도 관측치를 물리식, 경험식 등에 적용하여 산정하게 된다. 현재는 $R_{ld}$의 추정은 관측된 방사량간의 관계를 나타내는 경험식을 기반으로 지표면 근처의 대기 온도와 습도를 이용하여 산출하는 방법이 널리 사용되고 있다. 본 연구에서는 증발산 산정 알고리즘 개발의 시발점으로써 $R_{ld}$를 먼저 구하고 $R_{lu}$를 구하였다. 신뢰성 높은 방법을 이용하여 $R_{ld}$를 구하게 되면 정확도 높은 $R_N$을 구하는 데 기여할 수 있으며, 궁극적으로 보다 정확한 증발산을 산정할 수 있게 된다. $R_{ld}$는 일반적으로 clear sky 조건 하에서의 복사 에너지 플럭스($R_{ldc}$)를 구한 후 구름의 양에 따라 보정한다. 하강 장파복사량의 경우 널리 사용되는 공식 중 하나인 Brutsaert의 공식을 사용하였다. 광릉, 해남에 위치한 플럭스 타워지점에서 실측된 기온과 실제 수증기압을 입력인자로 사용하여 지점별 $R_{ldc}$를 먼저 구하고 Moderate Resolution Imaging Spectroradiometer(MODIS) 영상자료를 이용하여 검증한 뒤 최종적으로 남한지역을 대상으로 순 장파복사량 지도를 작성하였다. 이를 위해 MODIS 07 대기 프로파일 산출물(Atmospheric Profile Product)중 기온 및 이슬점온도를 추출하여 산정식의 입력자료로서 사용하였다. 상승 장파복사량의 경우 MODIS 11 지표면 온도 산출물(Land Surface Temperature product)를 이용하여 산정하였다. 이는 남한 지역의 증발산량 추정 및 에너지 수지 연구를 위한 중요한 기본 자료로서 유용하게 사용될 수 있으리라 사료된다.