• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.20-39
• /
• 2009

Abstract This research is a comparative study on the geological natural monuments of South and North Koreas. The classification system on natural monuments between South Korea and North Korea is similar, but North Korea's designations are relatively well-balanced. The geology field of South Korea was composed of rocks, caves, fossils and general geology, whereas that of North Korea was subdivided into rocks, fossils, strata, mineral springs, hot springs, geography, waterfalls, lakes, caves and pools. Unlike South Korea, North Korea designates and preserves geological structures such as fold and fault, and representative outcrops of mine. It is suggested that South Korea has to establish natural monument management policies for preserving geological structures and outstanding outcrops of mine. The 47-year period of preserving natural monuments in South Korea was divided into the stages I (1962~1980), II (1981~1995) and III (1996~2008). The designated numbers of geological natural monuments in the stage I, II and III average 1.1, 0.1 and 2.6, respectively. The number of geological natural monuments in South Korea is highest in Jeju province, whereas that in North Korea is highest in Gangwon province. This implies that natural monuments have been well protected especially in the locality of slow urbanization.

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.194-201
• /
• 2021

Induced polarization (IP) effect is known to be caused by electrochemical phenomena at interface between minerals and pore water. Spectral induced polarization (SIP) method is an electrical survey to localize subsurface IP anomalies while injecting alternating currents of multiple frequencies into the ground. This method was effectively applied to mineral exploration of various ore deposits. Titanomagnetite ores were being produced by a mining company located in Gonamsan area, Gwanin-myeon, Pocheon-si, Gyeonggi-do, South Korea. Because the ores contain more than 0.4 w% vanadium, the ore deposit is called as Gwanin vanadiferous titanomagnetite (VTM) deposit. The vanadium is the most important of materials in production of vanadium redox flow batteries, which can be appropriately used for large-scale energy storage system. Systematic mineral exploration was conducted to identify presence of hidden VTM orebodies and estimate their potential resources. In geophysical exploration, laboratory geophysical measurement of rock samples is helpful to generate reliable property models from field survey data. Therefore, we performed laboratory SIP data of the rocks from the Gwanin VTM deposit to understand SIP characteristics between ores and host rocks and then demonstrate the applicability of this method for the mineral exploration. Both phase and resistivity spectra of the ores sampled from underground outcrop and drilling cores were different of those of the host rocks consisting of monzodiorite and quartz monzodiorite. Because the phase and resistivity at frequencies below 100 Hz are mainly dependent on the SIP characteristics of the rocks, we calculated mean values of the ores and the host rocks. The average phase values at 0.1 Hz were ores: -369 mrad and host rocks: -39 mrad. The average resistivity values at 0.1 Hz were ores: 16 Ωm and host rocks: 2,623 Ωm. Because the SIP characteristics of the ores were different of those of the host rocks, we considered that the SIP survey is effective for the mineral exploration in vanadiferous titanomagnetite deposits and the SIP characteristics are useful for interpreting field survey data.

• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.230-242
• /
• 2017

Seismic velocities measured from in-situ tests (n=177) and through rock core samples (n=1,035) are reviewed in light of construction standards, widely used standards as a first-hand approximation of rock classification solely based on seismic velocities. In-situ down hole tests and refraction survey for soft rocks showed seismic velocities of 1,400~2,900 m/s which is faster than those specified in construction standards. For moderate~ hard rocks, in-situ down hole tests and refraction survey showed 2,300~3,800 m/s which roughly corresponds with the range specified in the construction standards. A similar trend is also observed for seismic velocities measured from rock core samples. The observed differences between construction standards and seismic velocities can be explained in two ways. If construction standards are correct the observed differences may be explained with seismic velocities affected by underlying fast velocities and also possibly with selection of intact cores for velocity measurement. Alternatively, construction standards may have intrinsic problems, namely artificial discrete boundaries between soft rocks and moderate rocks, application of foreign standards without consideration of geologic setting and lack of independent verification steps. Therefore, we suggest a carefully designed verification studies from a test site. We also suggest that care must be exercised when applying construction standards for the interpretation and accessment of rock mass properties.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.9
• /
• pp.23-32
• /
• 2015

This study examined blast testing measurement data which had been obtained from 97 field sites in Korea to investigate the comprehensive characteristics of rock blasting-induced vibration focusing on the effect of excavation types (tunnel, bench) and rock types. The measurement data was from the testing sites mostly in Kangwon province and Kyungsang province and rock types were granite, gneiss, limestone, sand stone, and shale in the order of number of data. The study indicated that the blasting-induced vibration velocity was affected by the excavation types (tunnel, bench) and bench blasting induced higher velocity than tunnel blasting. In addition, the vibration velocity was also highly affected by the rock types and therefore, it can be concluded that rock types should be considered in the future to estimate a blasting-induced vibration velocity. Furthermore, the pre-existing criteria was compared with the results of this study and the comparison indicated that there was a discernable difference except for tunnel blasting results based on the square root scaling and therefore, further studies and interests, which include the effects of rock strength, joint characteristics, geological formation, excavation type, power type, measurement equipment and method, might be necessarily in relation to the estimation of blasting-induced vibration velocity in rock mass.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.181-191
• /
• 2016

In geological storage of $CO_2$, the behavior of $CO_2$ is influenced by pore network of rock. In this study, the drilling cores from Pohang Basin were analyzed quantitatively using three-dimensional images acquired by X-ray micro computed tomography. The porosities of sandstone specimens around 740 m-depth (T1), 780 m-depth (T2) and 810 m-depth (T3) which were target strata were 25.22%, 23.97%, 6.28%, respectively. Equivalent diameter, volume, area, local thickness of pores inside the sandstone specimens were analyzed. As a result, the microstructural properties of T1 and T2 specimens were more suitable for geological storage of $CO_2$ than those of T3 specimens. The result of the study can be used as input data of the site for decision of injection condition, flow simulation and so on.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.199-210
• /
• 2023

The physical properties of rocks in reservoirs change after CO₂ injection, we modeled a reservoir with a transition zone within which the physical properties change linearly. The function of the Wolf reflection coefficient consists of the velocity ratio of the upper and lower layers, the frequency, and the thickness of the transition zone. This function can be used to estimate the thickness of a reservoir or seafloor transition zone. In this study, we propose a method for predicting the thickness of the transition zone using deep learning. To apply deep learning, we modeled the thickness-dependent Wolf reflection coefficient on an artificial transition zone formation model consisting of sandstone reservoir and shale cap rock and generated time-frequency spectral images using the continuous wavelet transform. Although thickness estimation performed by comparing spectral images according to different thicknesses and a spectral image from a trace of the seismic stack did not always provide accurate thicknesses, it can be applied to field data by obtaining training data in various environments and thus improving its accuracy.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.65-65
• /
• 2010

지구상의 광물, 암석, 화석 그리고 지질구조, 지형 등의 개개의 지형 지질학적 요소의 특성과 다른 대상과의 상호관계를 지질다양성이라고 한다. 지질다양성은 지형 지질에 내재되어 있는 본질적, 문화적, 심미적, 경제적, 기능적, 연구 및 교육적 가치를 이해하고 보전함으로써 유지 할 수 있다. 이 연구는 지질다양성에 대한 흥미와 이해를 높이기 위해 학술적 보전 가치가 있는 강원도 영월지역을 선정하여 그 특징을 분석하고 지질다양성을 효율적으로 활용하는 방안을 제언하고자 한다. 강원도 영월지역의 지질다양성에 대한 조사는 지형경관 자원과 지질특성의 희소성, 대표성, 학문적 가치 및 활용가치에 중점을 두고 전문가와 협의하여 보존가치가 있고 지리적으로 접근하기 편리한 노두 8곳을 선별하였다. 선별된 8곳의 노두는 고생대의 암석과 지층, 뚜렷한 퇴적구조, 화석, 규모가 크고 전형적인 하천지형이 나타나는 곳으로 지질유산(지형 지질)의 내재적 가치와 지구과학적 이해를 도울 수 있는 대상지이다. 대상지의 지질다양성에 대한 조사를 토대로 야외 지질학습장과 지질공원 및 지질명소, 과학적 특별흥미지역 등을 개발하여 제공함으로써 지형 지질에 대한 자기주도적 학습 능력 신장과 지구과학에 대한 흥미와 이해를 증진시키는 장을 마련해 줄 수 있을 것이다. 또한 과학적 가치와 더불어 사회적, 문화적 가치를 부여하여 보전함으로써 지질유산(지형 지질)에 대한 새로운 시각이 생길 것이다.

• Economic and Environmental Geology
• /
• v.37 no.2
• /
• pp.195-206
• /
• 2004

Paleomagnetic and rock-magnetic investigations have been carried out for the Cretaceous sedimentary rocks in the Poongam (also called Gapcheon) Basin in the eastern South Korea. A total of 128 independently oriented core samples were drilled from 13 sites for this study. The mean direction after bedding correction (D/I=353.1$^{\circ}$/55.6$^{\circ}$, k=21.5, =$$\alpha$_{95}$=10.1$^{\circ}$) is more dispersed than the mean direction before bedding correction (D/I=10.5$^{\circ}$/56.9$^{\circ}$, k=73.9, =$$\alpha$_{95}$=5.3$^{\circ}$), and the stepwise unfolding of the characteristic remanent magnetization (ChRM) reveals a maximum value of k at 20% unfolding. Secondary authigenic hematite accompanied by altered clays such as chlorite was identified by the electron microscope observations. These results collectively imply that the ChRM is remagnetized due to the formation of the secondary authigenic hematite after tilting of the strata. It is interpreted that the chemical remagnetization was connected to the introduction of mixed magmatic-meteoric fluids, which formed hydrothermal vein deposits near the study area. The paleomagnetic pole position (214.3$^{\circ}$E, 81.6$^{\circ}$N, =$A_{95}$=7.4$^{\circ}$) of the Cretaceous sedimentary rocks calculated from remagnetized directions is close to those of the Late Cretaceous and Tertiary poles of the Korean Peninsula. This Late Cretaceous to Tertiary remagnetization seems to be widespread over the Okcheon Belt because the chemical remagnetization is previously reported to be found in rocks from other Cretaceous small basins (e.g., Eumseong, Gongju and Youngdong basins) along the Okcheon Belt and some Paleozoic strata from the Okcheon unmetamorphosed zone.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.3
• /
• pp.153-171
• /
• 2018

This study focuses on the investigation of geologic distribution and stratigraphy in the eastern part of Yeongdeok-gun, based on Lidar imaging, detailed field survey, microscopic observations, SHRIMP and LA-MC-ICPMS U-Pb age dating, and a new geological map has been created. The stratigraphy of the study area is composed of the Paleoproterozoic metamorphic rocks consisting of banded gneisses of sedimentary origin and schists ($1841.5{\pm}9.6Ma$) of volcanic origin, Triassic Yeongdeok plutonic rocks ($249.1{\pm}2.3Ma$) and Pinkish granites ($242.4{\pm}2.4Ma$), Jurassic Changpo plutonic rocks ($193.2{\pm}1.9Ma{\sim}188.8{\pm}2.0Ma$) and Fine-grained granites ($192.9{\pm}1.7Ma$), Formations [Gyeongjeongdong Fm, Ullyeonsan Fm. (~108 Ma), Donghwachi Fm.] of the Early Cretaceous Gyeongsang Supergroup and acidic volcanic rocks and dykes erupted and intruded in the Late Cretaceous, Miocene intrusive rhyolitic tuffs ($23.1{\pm}0.2Ma{\sim}22.97{\pm}0.13Ma$) and sedimentary rocks of the Yeonghae basin, and the Quaternary sediments. The Triassic Pinkish granites, Jurassic Changpo plutonic rocks and Fine-grained granites are newly defined plutonic rocks in this study. Miocene intrusive rhyolitic tuffs bounded by the Yangsan Fault, which was first discovered in the north of Pohang city, are believed to play an important role in the understanding of the Miocene volcanic activity and the crustal deformation history on the Korean Peninsula. It is confirmed that The NNE-SSW-striking Yangsan Fault penetrating the central part of the study area and branch faults are predominant in the dextral movement and cutting all strata except the Quaternary sediments.

• Proceedings of the Speleological Society Conference
• /
• 1992.07a
• /
• pp.31-32
• /
• 1992

1. 서론 2. 동굴의 일반적 특성 1). 우리나라의 자연동굴에는 석회동굴과 화산동굴, 그리고 해식동굴이 주가 되고 있다. 2). 이 자연동굴들은 편재적으로 분포되고 있으며, 석회동굴은 반도부에, 화산동굴은 제주도에 해식동굴은 해안에 분포한다. 3). 대체로 석회동숙은 고기암층에서 형성되어 그 경관이 웅대한 것이 대부분이고 화산동굴은 용암의 유동성과 관계되어 장대한 것이 특징이다. 4). 석회동굴에서는 화려하고 웅대하나 그 규모가 큰 것이 적다고 하겠으나 화산동굴은 세계굴적인 규모인 동굴이 많다. 5). 특히 협재굴, 황금굴, 표선굴 등과 갈은 것은 화산동굴이나 2차생성물이 발달되어 있는 특이한 동굴이다. 6). 동굴의 기온은 지표의 기온에 영향을 전혀 받지 않는 것은 아니나 대체로 위도와 해발고도에 관계되고 있다. 7). 하리절의 동굴내 기온의 차는, 높은 위치에 있는 동굴의 기온이 낮은 위치에 있는 동굴보다 그 기온이 높게 나타난다. 8월의 고씨굴은 16$^{\circ}C$ 기온으로 나타났는데 같은 날 용담굴의 기온은 17$^{\circ}C$로 나타났다. 8). 동굴입구에서 깊은 내부의 대기의 기온차는 동벽의 온도와 거의 비슷하게 된다. 즉, 그 지층의 구조암석인 석회암의 기온에 지배되며, 이 온도는 거의 지표의 년간 평균온도와 비슷하다.(중략)