• Journal of the Korean earth science society
• /
• v.29 no.2
• /
• pp.117-127
• /
• 2008

Source parameters for forty four earthquakes which occurred in and around the Korean Peninsula were determined and the relations between them were studied. Snoke's method (Snoke, 1987) was applied in determining the corner frequencies and seismic moments. In general, the source parameters estimated at different stations for an earthquake show different values. These disagreements have been interpreted as originating, in principle, from an inadequate consideration of the source radiation pattern and direction dependent attenuation and amplification. The comer frequencies and seismic moments were averaged to exclude the such directional effects. Other source parameters were estimated from the mean corner frequency and seismic moment. The static stress drops, determined in this study, tend to be independent of seismic moment for events greater than a specific magnitude. For earthquakes with a size less than about $1.0{\times}10^{22}$ dyne-cm (nearly same as $M_L = 4.0$), the stress drop tends to decrease with the decreasing moment. This fact suggests a breakdown of the scaling law of source parameters in earthquakes below the threshold magnitude.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.1
• /
• pp.113-118
• /
• 1998

1994년 7월 25일 발생한 황해남부 지진(Mb=5.5)의 지진원 요소들을 결정하였다. 지진원 요소들을 결정하기 위하여 이 지진에 대하여 이전의 연구에서 얻어진 지진발생기구를 사용하였다. 지진발생기구에 의하면, 이 지진은 거의 동서방향의 압축응력장에 주향이동성분이 가미되어 발생한 것을 암시한다. 지진원 요소들은 단주기 및 장주기 P파에 대한 원지장 스펙트럼으로부터 계산되었다. 지진모멘트(M0), 코너주파수(f0), 지진원 반경(r) 및 응력강하량($\Delta$$\sigma$)은 각각 M0 = 3.18$\times$1024 dyne-cm, f0=0.3 Hz, r=3.7km, $\Delta$$\sigma$=27bar로 구해졌다. 지진모멘트로부터 산정한 모멘트 규모는 5.6으로 나타났다.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.673-680
• /
• 2007

The seismic source parameters of the Odaesan earthquake on 20 January 2007, including focal depth, focal mechanism, magnitude, and source characteristics, are analysed using seismic moment tensor inversion. The Green's function for different 3 crust models representing the southern Korean Peninsula are used. Final results show that the event, considering 6 seismic moment tensor elements, is caused by the typical strike slip fault with nearly NNE strike. The focal depth is estimated to be about 11km and 6 seismic moment tensor elements with 7.2% CLVD value shows typical double couple seismic source. The consistent characteristics of the strike and epicenter of the event with Odaesan fault imply that Odaesan earthquake is mainly caused by movement of the Odaesan fault.

• Journal of the Korean Geophysical Society
• /
• v.4 no.1
• /
• pp.47-55
• /
• 2001

conversion equations to calculate seismic moment(M_0) from body-wave magnitude(m_b), surface-wave magnitude(M_s), or both were derived by using 50 earthquakes occurred within 32～44°N and 123～133°E whose M_0 were determined together with m_b or M_s. We divided those earthquakes into the deeper and the shallower ones based on the reference focal depth of 70 km. The unit of M_0 is dyne-cm. In case of M_s, the deeper earthquakes exhibit the higher seismic moment than the shallower ones. Standard deviations associated with conversion equations for deeper and shallower earthquakes are 0.25 and 0.16, respectively, in moment magnitude. , for deeper earthquakes , for shallower earthquakes. In case of m_b, the dependence of conversion equation on focal depth is not clearly observed. Associated standard deviation is 0.28 in moment magnitude. In case that both m_b and M_s were determined, a new magnitude, , were defined for shallower earthquakes to derive a more stable conversion equation. Associated standard deviation is 0.14 in moment magnitude. Conversion equations above can be used to unify the earthquake size into a single magnitude type, i.e., moment magnitude, in and around the Korea Peninsula.

• Journal of the Korean Geophysical Society
• /
• v.7 no.3
• /
• pp.185-192
• /
• 2004

We calculate moment magnitudes of earthquakes occurred in the southern part of the Korean Peninsula from January, 2001 to February, 2004 and compare them with local magnitudes published by KMA(Korea Meteorological Administration) and KIGAM(Korea Institute of Geoscience and Mineral Resources). From this study, we find that local magnitudes of KIGAM have higher correlation with moment magnitudes than local magnitudes of KMA have. We induce a proper conversion formula by analyzing relation between published local magnitudes and calculated moment magnitudes. The induced formula can be used to unify kinds of magnitudes in earthquake catalogues and unified earthquake catalogues can be applied as necessary factors for analyzing earthquake characteristics, seismic hazards or attenuation formulas in the southern part of the Korean Peninsula.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.1 no.3 s.3
• /
• pp.123-136
• /
• 2001

The purpose of application of moment tensor inversion method is to determine source parameters, such as, focal mechanism, seismic moment and source depth. This paper presents results of focal mechanism solutions of 14 recent events with magnitudes ranging from M3.3 to M4.8 by using moment tensor inversion method called TDMT_INV. The strike of faults is in the direction of NE-SW and NW-SE with the movement of strike-slip or strike-slip of minor reverse component. The compressional axis of the stress field is predominantly E-W or ENE-WSW except for some faults, which are distributed at Ryongnam Massif and Wonsan, they have a compressional axis of N-S or NNW-SSE.

• The Journal of Engineering Geology
• /
• v.5 no.2
• /
• pp.215-231
• /
• 1995

The key concepts of seismic moment tensor are introduced in a 'physicist - oriented' style. The theory and application of seismic moment tensor which have been developed since the 1970s have become one of the most important branches in modern seismology. The description of earthquake sources in the modern seismology have led to much deeper understanding of the physics of indigenous earthquakes as well as various kinds of artificial seismic events, such as underground explosions, mining rockbursts, and reservoir induced tremors. Furthermore, with the development of digital seismological observation, some concepts, which were not included in 'classical' seismology, or not so important in 'classical' seismology, has become more and more important. It seems that it has been the time to have a new look at the fundamentals of seismology as a branch of applied physics, especially the part dealing with the physics of earthquake sources. Also in this field it may be important to clarify some fundamental concepts which, unexpectedly, have caused confusions even among professionals.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.5
• /
• pp.23-29
• /
• 2009

On December 13, 1996, an earthquake with local magnitude (M$_L$) 4.5 occurred in the Yeongwol area of South Korea. The epicenter was 37.2545$^{\circ}$N and 128.7277$^{\circ}$E, which is located inside the Okcheon Fold Belt. The waveform inversion analysis was carried out to estimate source parameters of the event according to the filtering bandwidth of seismic data. Using 0.02$\sim$0.2 Hz filtering bandwidth, focal depth and seismic moment were estimated to be 6 km and 1.3$\times$10$^{16}$ N$\cdot$m, respectively. This seismic moment corresponds to the moment magnitude (M$_W$) 4.7. The focal mechanism by the waveform inversion and P wave first motion polarity analysis is a strike slip faulting including a small thrust component, and the direction of P-axis is ENE-WSW. The moment magnitude estimated by spectral analysis was 4.8, which is similar to that estimated by waveform inversion. Average stress drop was estimated to be 14.3 MPa.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.213-220
• /
• 2003

고층의 강 모멘트저항골조에 대한 지진 반응을 살펴보기 위해서 동적해석을 실시하였다. 구조물은 세가지의 다른 설계절차로 의도적으로 설계하였고 그 세가지의 개념은 강도 지배설계, 강기둥-약보 지배설계, 횡변위 지배설계이다. 그렇게 설계한 구조물이 각각 질량비정형이 존재하도록 하여 힁변위, 소성힌지, 이력에너지 입력 및 요구응력에 대해서 토론하였다. 미래에 설계에의 응용을 위해서 최대 지반가속도로 표현한 두 등급의 지진 하중을 이용해서 이력에너지 입력요구 곡선을 제시하였다.

• Journal of the Korean Geophysical Society
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2007

A method to quickly estimate broadband moment magnitudes (Mwp) to warn regional and teleseismic tsunamigenic earthquakes is tested for application of the method to the different seismic observation environment. In this study, the Mwp is calculated by integrating far-field P-wave or pP-wave of vertical component of displacement seismograms in time domain from earthquakes, having magnitude greater than 5.0 and occurred in and around the Korean peninsula from 2000 to 2006. We carefully set up the size of the time window for the computations to exclude S wave phases and other phases following after the P wave phase. The P wave velocities and the densities from the averaged Korean crustal model are used in the computations. Instrumental correction was performed to remove dependency on the seismograph. The Mwp after the instrumental correction is about 0.1 greater than the Mwp before the correction. The comparison of our results to the those of foreign agencies such as JMA and Havard CMT catalogues shows a higher degree of similarity. Thus our results provide an effective tool to estimate the earthquake size, as well as to issue the necessary information to a tsunami warning system when the effective earthquake occurs around the peninsula.