• Geotechnical Engineering
• /
• v.13 no.4
• /
• pp.121-134
• /
• 1997

Vibrations induced by traffic loading and construction activities are extremely important due to their potential to cause damage to adjacent structures and toy complaints to the neighbors. Vibration induced damage to the built environment may be caused by the direct transmission of vibrations as well as by the, vibration induced differential settlement. In order to effectively control the vibration related problems, the accurate in-situ vibration monitoring is essential. In this paper, a calibration technique of a geophone which is widely used in practice was described. Once the frequency characteristics of individual geophones were calibrated, the 3fomponent geophone was developed for the in-depth vibration measurement, and the dot ailed calibration and application techniques of the 3fomponent geophone were described. Vibrations caused by blasting, train loading, and pile driving were measured and the applicability of the 3fomponent geophone was assessed.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.44-50
• /
• 2012

A new type of chemical oxidation technology utilizing micro bubble ozone oxidizer and a pneumatic fracturing equipment was developed to enhance field applicability of a traditional chemical oxidation technology using hydrogen peroxide as an oxidizer for in-situ soil remediation. To find an efficient way to dissolve gaseous ozone into hydrogen peroxide, ozone was injected into water as micro bubble form then dissolved ozone concentration and its duration time were measured compared to those of simple aeration of gaseous ozone. As a result, dissolved ozone concentration in water increased by 31% (1.6 ppm ${\rightarrow}$ 2.1 ppm) and elapsed time for which maximum ozone concentration decreased by half lengthened from 9 min to 33 min. When the developed pneumatic fracturing technology was applied in sandy loam, cracks were developed and grown in soil for 5~30 seconds so that the radius of influence got longer by 71% from 392 cm to 671 cm. The remediation system using the micro bubble ozone oxidizer and the pneumatic fracturing equipment for field application was made and demonstrated its remediation efficiency at petroleum contaminated site. The system showed enhanced remediation capacity than the traditional chemical oxidation technology using hydrogen peroxide with reduced remediation time by about 33%.

• KSBB Journal
• /
• v.10 no.1
• /
• pp.78-88
• /
• 1995

The encapsulatpd A. niger grew up inside the capsule and mycelia penetrated through the pore of the capsule membrane. The mycelia on the capsule wall became loose when the carbon source and oxygen were deficient in the medium. On the contrary, the production rate increased and mycelia made a lump tightly when the carbon source and oxygen were sufficient. Namely, number of proper capsule of unit volume in the medium was existed. The phenomenon which was swelled of capsule membrane in cultivation could prevented by adding CaCl2 into the medium. According to the time adding CaCl2 into the medium, the production rate of citric acid was influenced. In case of adding CaCl2 into the medium at 7th day cultivation, the production yield of citric acid was increased about 40 percent higher than that of adding CaCl2 initially. The production yield of citric acid using encapsulated A. niger of flask culture was influenced with oxygen supply. The production yield of citric acid ($\Delta$p/$\Delta$s) of the flask culture was increased 3.88 time by using T-flask instead of parafilm sealed flask. Therefore, the productivity and consumption rate concerning production which was taken carbon source were increased when oxygen supply was sufficient. The production of citric acid using encapsulated A. niger was increased average 30 percent higher than that of bead in between 6th and 13th day cultivation.