• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.2 s.2
• /
• pp.97-104
• /
• 1993

The Cadastre assumed as one of the most important Part of GIS has the highest priority in GIS model and Organization of the Cadasual embraces the modern methods of gaining and collecting geometric type cadastral data concerning on the land and it's ownership. Geneally, the measurement of the topologigraphic map offers great convenience for the architects to device. But the graphic precision of the value from the map is too low for many users, the large scale digital map as well as cadastral map can solve these problems. So it is necessary to get the coordinates of the characteristic points and the graphic information. In this paper, for calculating the point of measured element such as distance, and it's adjustment. This paper dicusses the methodes also, the combination of GIS data and Cadastral data and the geo-reference system, topology, data system, data modeling and so on.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.685-691
• /
• 2007

In this paper through Honan high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21 cm to 40 cm diminishing to a gentle straight line, distortion of X axis varies 14 cm to 29 cm. Through a revision, the deviation value between the coordinates were 6 mm to 9 mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey (10 cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.405-413
• /
• 2002

It is crucial that we should set proper standards capable of efficiently handling new corrections of maps, connections of edges on the maps, administrative districts, and inter-scale connections in order to make serial cadastral maps. This study drew a two dimensional Parameter using an indent point, as a Review Control Point, on forest screening line or boundary line of administrative district. The study also introduced a few different transformations such as Affine Transformation, N-Degree Polynomial Transformation, and Projective Transformation, the two dimensional transformation methods to apply them to the connection of cadastal·forestry maps and the connection of parcels between the administrative districts, on the forestry map designed by discretionary edges on the maps per district unit with parcel numbers and tried to apply the coordinates transformation method to connections of maps to make serial cadastral maps.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.67-75
• /
• 2002

Digital photogrammetry is one of the powerful tools for surveying in more perceptual ways and exploiting the continuously developing computer technology. Nowadays, digital photogrammetry is being used for a number of industrial measurements and inspections but the automation aspect of this technique is not fully developed yet. Photogrammetric work, which is obtained through usual workflow, delays for a big amount of CGP surveying, interpretation and cadastral information. Therefore through studying ways of reducing the volume of photogrammetric works, financial opportunities for digital photogrammetry can be found. This research is focused on the development of the new workflow and study algorithm in digital photogrammetry. Using this result we can reduce financial expenses and improve technologies of topographic and cadastral plans creation.

• Spatial Information Research
• /
• v.22 no.3
• /
• pp.23-24
• /
• 2014

NGII (National Geographic Information Institute) has been providing VRS (Virtual Reference Station) service so that could determine precise positioning in real time since 2007. However, since the VRS service has to maintain the connected status with VRS server, the number of users who can use VRS service are limited by capacity of VRS server. To solve this problem, NGII has been providing FKP (Virtual Reference Station) service using one way telecommunication from November 1, 2012. Therefore, it is predicted that the usage of FKP service will increase in public surveying and cadastral resurveying in the future. However, the studies with respect to analysis of FKP precision for applying to public surveying and cadastral resurveying is not conducted enough. In this study, to analyse the application possibility of FKP on the public surveying and cadastral resurveying, the two kind analysis were performed. First is the analysis of accuracy according to the configuration of reference station of FKP and VRS. One is consisted of same reference stations, another is consisted of different reference stations. Second is the accuracy anlalysis of horizontal and vertical positioning acquiring VRS and FKP data in various measurement environment based on VRS regulation. Result of first study, Positioning accuracy according to the configuration of the reference stations satisfies related regulation. However, accuracy of FKP in case of different reference stations is worse than in case of same reference stations.. The result of second test shows that the horizontal precision of FKP and VRS in good measurement environment satisfy the allowed precision. However, in some case, horizontal precision of FKP and VRS in poor measurement environment exceed the allowed precision. In addition, the number of exceeding the allowed precision in the FKP is more than the VRS. The vertical precision of the VRS satisfy related work provision. In conclusion, the result of this study shows that the FKP only in open area should be used for public survey and cadastral resurvey. Therefore the additional studies with respect to the improvement of FKP precision should be conducted.

• Journal of Cadastre & Land InformatiX
• /
• v.54 no.1
• /
• pp.103-115
• /
• 2024

Trilateral adjustment can complement the problem of transforming cadastral maps into World Geodetic Coordinate system. First, it is possible to determine adjusted coordinate of common points that match each other over a wide area. Second, calculations that focus on specific points can be performed. Third, a solution that maintains the shape of the regional network can be obtained through constraints. Thus, the point coordinates can be determined appropriately for the survey system. In addition, heterogeneous survey results that span regions with different coordinate origins can be calculated on a single origin coordinate. This improves the efficiency of the workflow in tranforming cadastral maps into World Geodetic Coordinate System.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.519-520
• /
• 2004

Using the baseline vectors obtained by GPS observations on 32 triangulation points over Gyunggido area, Bessel coordinates of the corresponding points are calculated according to trilateration adjustment. The result shows the possibility of construction of a new cadastral survey network with the degree of correctness of 5cm, when newly computing the coordinates of the survey datum point of the area with values from GPS baseline vectors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.245-251
• /
• 2004

Recently, in a field of cadastre, a computerization of cadastral map is in progress with great growth of GSIS field. Also, the needs fer the integration of land and building information are widely increasing for integral-management and its application of various land related information. Through a revision of cadastral laws to replace the existing 2D-Cadastre with the 3D-Cadastre, a legal basis to register the position of buildings and facilities is prepared in the governmental or civil fields. This paper presented 3D-Cadastre theory that has been studied on Europe and surveyed building position directly with Totalstation at cadastral control point after choosing pilot test area, Also, the most efficient surveying method of registering building in a cadastral map is presented with comparing and analyzing building position after surveying digital orthophoto and digital map. And it is constructed a 3D information cadastral map model that can make the integral management of land, building, connecting land recorders, building management ledgers, building titles, building pictures, and related attribute information.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.2
• /
• pp.149-160
• /
• 2015

This paper suggests the MMAS(Map Matching using Additional Surveying) method to improve the cadastral discrepancy search algorithm that currently does not include corrections of mis-represented parcel data. The MMAS is a method to search for cadastral discrepancy after correcting mis-represented parcel data using nearby anchor points confirmed by surveys. The MMAS first transforms the coordinate system of the digital cadastral map by overlaying anchor points obtained in the field surveying process over the corresponding edges of buildings and facility points on the digital topographic map. Then, it searches for cadastral discrepancy by checking if the area differences exceed the tolerance limit. This method improves the current method for searching for cadastral discrepancy by performing the process after correcting extortion of the digital cadastral map. This helps to identify cadastral discrepancies that are not detectable within the distorted digital cadastral map. With our experiment, this method identified more discrepancies compared to the method without the correcting the distortion of the digital cadastral map. We believe this method will be able to help the national cadastral re-survey by identifying potential cadastral discrepancy more accurately.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.141-150
• /
• 1996

A satellite positioning system has been recently introduced in Korea and the applications of the system are in-creasing gradually, and it is, therefore, interested in the geocentric coordinate system. In this paper, the requirements of the redefinition of the Korean geodetic system which is suited to the geocentric datum and the strategies for the establishment of new geodetic networks are considered. It is also taken into account to maintain the control points, in the transition from the old coordinate systems to a new coordinate system.