• Explosives and Blasting
• /
• v.32 no.3
• /
• pp.18-25
• /
• 2014

Ground vibration and noise from blasting operation are known to be the most representative constituents which can cause human and material damage. In this study, the effect of delay time on ground vibration is investigated by adopting seven different delay times in bench blasting. For each delay time, three blasting operations were performed. The prediction equations for blasting vibration are derived from 50 sets of measurement and the time theory of Langefors is evoked in the analysis of the blasting vibrations and frequencies. For the delay times of 8 ms and 28 ms, the average values of ground vibration are 5.76 cm/sec and 5.75 cm/sec, respectively, which are considerably low. Also the cyclic variation in the vibration measurements with the delay time confirms the interference effect. From the application of the measurements of blasting vibration and frequency to the time theory of Langefors, it is concluded that the optimum delay times are 8 ms and 24 ms for the test site.

• Tunnel and Underground Space
• /
• v.20 no.2
• /
• pp.112-118
• /
• 2010

Before blasts that can have direct impacts on human bodies or structures, it is necessary to assess impacts of ground vibration. Therefore, frequency has been recognized as an important factor in order to assess impact on ground vibration and damages. There have been many studies on impacts of frequency. But, there have been no studies on relations between vibration and frequency according to delay time difference. In this study, we examined the relations between delay time difference and frequency according to each frequency with which reinforcement and destructive intervention repeat through delay time difference obtained using superposition modeling of single hole blasting waveform based on the theory of time difference developed by Langefors.

• Explosives and Blasting
• /
• v.32 no.3
• /
• pp.1-9
• /
• 2014

Since the rock fragmentation from a bench blasting can affect the subsequent processes including loading, hauling and crushing, its control is essential for the assessment of blasting efficiency as well as production cost. In this study, the delay time could be precisely controlled by using electronic detonators. The rock fragmentations resulted from the blastings with different delay times of 1, 2, 3, 4, 5, 7 and 10ms per each meter of burden were measured from full scale field tests in a limestone mine. The results showed that the optimum delay time for minimum fragmentation was approximately 6ms/m. From the analysis of fragmentation size distribution, it was possible to find that delay time can be a parameter on rock fragmentation and thus it would be possible to control rock fragmentation by adjusting delay time.

• Explosives and Blasting
• /
• v.32 no.2
• /
• pp.1-8
• /
• 2014

In this study, 16 test blastings had been carried out with different spacings, burdens, drilling lengths, and charges per delay for investigating the characteristics of ground vibration propagation, which depends on the delay time. From the tests, it was possible to derive a ground vibration equation. Using the equation, the characteristics of ground vibration could be investigated by analyzing the nomogram and predicting the Peak Particle Velocity (PPV), which are influenced by the delay time and the priming location. The trend of ground vibration change depending on the delay time was analyzed for the standards charges of 0.5, 1.6, 5, and 15 kg, which were suggested in "Blasting design and construction guidelines to road construction" by the Ministry of Land, Infrastructure and Transport. From the study, it would be possible to suggest a favorable vibration control method, which depends on the charge.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.97-109
• /
• 2014

In order to identify the characteristics of the propagation depending on delay time (20, 25 ms) and priming location (top priming, middle priming, bottom priming), test blasts were carried out a total of 4 times using different spacing, burden, drilling length, charge per delay and was derived the formula to predict blast vibration. This study investigated the characteristics of vibration by analysis of the nomogram and prediction of Peak Particle Velocity (PPV) from delay time and priming location by the formula to predict ground vibration. And it analyzed the trends of vibration increase by standards charge 0.5, 1.6, 5, 15 kg. Standards charge is "Blasting design and construction guidelines to road construction" by the Ministry of Land, Infrastructure and Transport. Depending on the charge in favor of vibration control method is proposed. Thus, when the design was to be used as a variable.

• Explosives and Blasting
• /
• v.22 no.2
• /
• pp.1-11
• /
• 2004

일반적으로 국내 석회석 광산에서의 발파는 20ms나 25ms 시차를 가지는 지발발파로 시행되어지고 있다. 국외에서는 전자뇌관을 사용하여 암반의 지질학적인 특성에 따라 지발 시차를 사용자의 현장에 따라 선정하여, 주변 보안 물건에 따른 진동 및 소음을 경감하면서, 1회 발파의 생산량을 증대할 수 있으며, 2차 파쇄 비용 및 적재비용을 절감하는 최적의 시차를 적용하여 발파 규모를 줄이지 않는 발파패턴을 적용하고 있다. 본 연구는 해외에서 사용되고 있는 전자뇌관을 국내 현장 석회석 광산(단양)에 적용함으로 최적지연시차를 찾아내는 방법과 초시의 오차에 따른 문제점과 향후 국내 적용성을 판단하고자 하였다. 대규모 석회석 광산을 대상으로 최적시차를 판단하고자 동일 패턴에서 시차를 6ms ~ 30ms로 시험발파를 시행하여 4가지 요소 발파진동속도, 주 주파수특성, 파쇄입도, 암석 이동 및 버력의 상태를 분석하여 각 시차에 따른 배점을 두어, 당 현장에 요구되는 개별 가중치를 선정하여 분석하였다. 분석 결과 당 현장에서의 발파결과에 따른 요소별 가중치를 발파진동속도(20), 주 주파수 특성(20), 파쇄입도(40), 암석 이동(10) 및 버력의 상태(10)로 하여 분석한 결과 15ms가 최적시차로 나타냈다. 향후 각 현장에 적합한 요소별 가중치를 선정하여 현장별 최적시차를 도출한다면 최적의 발파효과를 있을 것으로 판단된다.

• Tunnel and Underground Space
• /
• v.16 no.4 s.63
• /
• pp.326-333
• /
• 2006

In this study, the vibration waveform of the single hole which is not interfered from the different blasting holes is separated, the each dominant frequency which is determinated through the Fast Fourier Transform(FFT) is measured. Also the separation waveform executed a superposition modeling which changes to delay time from 1ms to 80 ms in 1ms interval and controls the number of blasting holes from 2 holes to 15 holes in order to investigate the effect of PPV according to the duration time of the vibration and the number of blasting holes. As a result of analysis, the longer the duration time of the vibration, the longer the delay time which is not interfered from the different blasting holes and the effect regarding the number of blasting holes from inside identical delay time did not appear a lot.

• Explosives and Blasting
• /
• v.18 no.4
• /
• pp.29-42
• /
• 2000

발파에 사용하는 지발뇌관의 정확한 지연초시클 알지 못하면 발파진동제어 발파에서 허용진동값을 초과하여 실패하는 경우가 많다. 발파공의 지발단차를 설계함에 있어서 지발뇌관 사이의 실제 기폭초시가 8 ms를 초과하도록 기폭초시를 배열하기 위해서는 지발뇌관 자체의 지발초시 오차가 발파에 어떠한 영향을 미치는 가를 면밀하게 검토하여 발파진동을 제어할 수 있도록 지발뇌관 실제 초시에 의해 순차적으로 기폭될 수 있는 지발시차로 발파를 설계해야 한다. 지발뇌관의 제조기준과 명목상의 호칭 초시 및 실제 초시 등이 어떤 특징을 나타내며 발파를 설계할 때에는 어떤 초시를 기준하여 설계해야 진동제어를 실현할 수 있는 가를 알아보고, 국내의 전기 지발뇌관과 다단발파기를 이용한 발파설계 사례는 어떤 종류가 있으며, 다단발파 구역의 회로분할과 분할구역에 대하여 지발뇌관 및 다단발파기에 의한 지연시차 배열은 어떻게 조합해야 올바른 진동제어 발파가 될 수 있는 지를 검토한다. 지발뇌관의 실제 초시를 고려하지 않은 발파에서 설계시의 허용기준과 관계없이 과대한 발파진동이 발생되어 공해가 발생되므로 지발뇌관의 실제 초시를 기준하여 중복초시와 적정한 초시간격이 유지될 수 있도록 설계하는 기술이 필요하다.

• Explosives and Blasting
• /
• v.28 no.2
• /
• pp.37-49
• /
• 2010

Ground vibration caused by blasting in the urban area close to structures can give some indirect damage to human body and may lead to structural damage to buildings. At the stage of design or when complaints were filed by residents, the test blasting in borehole, which is most practical for expressing simple vibration wave form quantitatively, is usually chosen for assessing the degree of damage to structures. In this paper, some lessons gained from the application of electronic detonator triggering system in borehole test blasting are presented. The difference in delay time of detonator when borehole is blasted by electronic detonator and electric detonator are discussed. The peak particle velocities measured at the structure embedded in the similar rock layer to main line of tunnel at test site and measured at the road surface just above the tunnel having different overburden layers were analysed to draw their relationship. By comparing the results with those appearing in some published literatures, the usefulness of the borehole test blasting and the importance of delay time of detonator are addressed.

• The Korean Journal of Financial Management
• /
• v.14 no.1
• /
• pp.141-169
• /
• 1997

본 논문은 시장개설 초기 4개월간의 주가지수 선물수익률과 기초자산인 현물(KOSPI 200) 수익률간의 선도-지연효과를 두 개의 모형을 이용하여 실증검증하였다. 첫 번째 모형은 설명 변수로 선물수익률의 시차변수를 사용하고 종속변수로 현물수익률을 사용했다. 두 번째 모형은 설명변수로 선물수익률의 시차변수를 사용하는 것은 첫 번째 모형과 같으나 종속변수로 ARMA모형에서 구한 현물수익률의 오차항(return innovations)을 사용하였다. 또, 여러 시장조건에서 현물수익률과 선물수익률사이의 선도-지연효과가 특정한 양상을 보이는가를 분석하였다. 좋은 정보와 나쁜 정보, 거래량이 많은 경우와 적은 경우, 변동성이 높은 경우와 낮은 경우로 나누어서 선도-지연효과를 살펴보았다. 실증검증의 결과 KOSPI 200 현물수익률은 ARMA(2,3) 모형이 적합하며 선물이 현물을 10분 이내로 선도한다. 하지만 그 관계는 일방적인 것이 아니어서 15분후에는 현물이 선물을 선도하는 피드백(feed-back) 현상이 나타났다. 좋은 정보(good news)에서는 선물이 현물을 5분정도 선도하고 나쁜 정보(bad news)하에서는 선물 선도현상이 약해진다. 보통 정보(morderate news)하에서는 현물이 선물을 10분내로 선도한다. 거래량이 많은 경우와 변동성이 높은 경우에는 선물이 현물을 선도하는 것이 뚜렷하나 거래량이 적은 경우와 변동성이 낮은 경우에는 선물과 현물간에는 특정한 선도-지연현상이 나타나지 않는다.