• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.3
• /
• pp.53-60
• /
• 1973

Calculations of the temperature coefficients of the elastic surface wave velocity and delay time were performed for the propagation along the X axis of rotated Y cut plane of the LiNbO3 and LiTaO3. Measurements of the temperature dependence of delay time of the elastic surface wave were also performed for the propagation along the X axis of a 130" rotated Y cut plane of the LiNb03 at the temperature range from liquid He to room temperature. Experimental value 70$\times$10-6/$^{\circ}C$ of the temperature coefficient of the delay time of the elastic surface wave agrees well with the calculated value 72.7$\times$10-a/$^{\circ}C$. The temperature coefficient of delay time of elastic surface wave propagating along the X axis of a 130$^{\circ}$ rotated Y cut plane o( the LiNbO3 is approximately 16$\times$10-6/$^{\circ}C$ at the near temperature of liquid He.d He.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.499-502
• /
• 1998

본 논문에서는 한 쌍의 수동소나를 이용하여 미지의 잠항물체의 존재 유무를 확인하고 각 센서에 도달하는 시간지연의 차를 평가하는 Detection과 Tracking 알고리즘을 연구한다. 이 과정에서 이동하는 표적의 속력에 의한 도플러효과를 보상하는 2차원 확률분포 함수를 적용함으로 보다 정확한 결과를 도출한다. 관측신호의 Cross-Correlation과 Bayesian Method를 이용하여 계산한 시간지연과 도플러효과 비의 이차원 Likelihood 함수로부터 사후확률 (Posterior Probability)을 구하여 발견 평가와 추적을 수행한다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.44-48
• /
• 2002

본 논문에서는 한국형 디지털 서명 표준인 KCDSA에서 사용할 목적으로 개발된 국내 해쉬 함수 표준인 HAS-160 알고리즘을 VLSI 설계하였다. 하나의 단계연산을 하나의 클럭에 동작하고 단계연산의 핵심이 되는 4개의 직렬 2/sup 3/ 모듈러 가산기를 CSA(Carry Save Adder)로 구현하여 캐리 전파시간을 최소로 하고 HAS-160 해쉬 알고리즘의 특징인 메시지 추가생성을 사전에 계산하여 지연시간을 줄이는 설계를 하였다. 설계된 해쉬 프로세서를 0.25 urn CMOS 스탠다드 셀 라이브러리에서 합성한 결과 총 게이트 수는 약 21,000개이고 최대 지연 시간은 5.71 ns로 최대 동작주파수 약 175 MHz서 약 1,093 Mbps의 성능을 얻을 수 있었다.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.3
• /
• pp.27-32
• /
• 2004

The oceanic tides have an effect on groundwater levels in coastal fractured rock aquifers. The observed groundwater table fluctuations caused by the effective stress through an aquifer are shown as sine curves similar with tidal fluctuation. To estimate a hydrogeologic parameter, tidal method is utilized with groundwater level fluctuations of two monitoring wells. Cross correlation function is used to calculate time lags between observed groundwater levels and tide, and the deeper well shows longer time lag. The storage coefficients calculated by using tidal efficiency and time lag show large differences. The storage coefficients obtained by using time lags are close to the result of slug test, and that of the deeper well shows closer value by slug test. The tidal efficiency is unsatisfied to apply in the tidal method because of an effect of phreatic aquifer and the vertical flow of groundwater through fractured confining bed. This tidal method can be an economical and effective way to define the parameter by considering the location of observation well and hydrogeologic characteristics of a coastal aquifer.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.2
• /
• pp.33-43
• /
• 2012

Digital signage is referred to as a smart electronic display system that delivers multimedia-based information and advertisements to customers. Typically, the digital signage starts its playback after downloading a list of multimedia contents from network storage to its local disk. However, a way of downloading the entire contents before its playback entails a long initial delay time. In this paper, we formulate a problem of the initial delay time and provide a solution to compute a minimally demanded initial delay time according to a given network bandwidth and qualities/sizes of the multimedia contents. In addition, we analyze the performance of the proposed solution with various multimedia contents on digital signage.

• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.372-376
• /
• 1997

We study the time resolved anti-Stokes Raman spectroscopy with correlated pump and Stokes waves. When only two pump waves with relative delay are incident into a Raman medium, the Stokes waves generated by stimulated Raman scattering couple with the pump waves to generate anti-Stokes signal. Since the correlation between Stokes and the pump waves are not perfect and not quantified yet, we make a simple model fot it and calculate the normalized anti-Stokes signal intensities as a function of time delay. The broadband light regarded as chaotic field.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.118-125
• /
• 2014

An approximation of speed of sound in the measurement plane is essential for the inverse estimation of temperature. To this end, an inverse problem relating the measured retarded time data in between set of sensors and actuators array located on the wall is formulated. The involved transfer matrix and its coefficient vectors approximate speed of sound of the measurement plane by using the radial basis function with finite number of interpolation points deployed inside the target field. Then, the temperature field can be reconstructed by using spatial interpolation technique, which can achieve high spatial resolution with proper number of interpolation points. A large number of retarded time data of acoustic paths in between sensors and arrays are needed to obtain accurate reconstruction result. However, the shortage of interpolation points due to practical limitations can cause the decrease of spatial resolution and deterioration of the reconstruction result. In this works, a regeneration for obtaining the additional retarded time data for an arbitrary acoustic path is suggested to overcome the shortage of interpolation points. By applying the regeneration technique, many interpolation points can be deployed inside the field by increasing the number of retarded time data. As a simulation example, two rectangular duct sections having arbitrary temperature distribution are reconstructed by two different data set: measured data only, combination of measured and regenerated data. The result shows a decrease in reconstruction error by 15 % by combining the original and regenerated retarded time data.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.8 s.350
• /
• pp.35-43
• /
• 2006

In the paper, we propose a new method for power optimization that uses path balancing based on stochastic estimation of glitch in Statistical Static Timing Analysis (SSTA). The proposed method estimates the probability of glitch occurrence using tightness probability of each node in timing graph. In addition, we propose efficient gate sizing technique for glitch reduction using accurate calculation of sizing effect in delay considering probability of glitch occurrence. The efficiency of proposed method has been verified on ISCAS85 benchmark circuits with $0.16{\mu}m$ model parameters. Experimental results show up to 8.6% of accuracy improvement in glitch estimation and 9.5% of optimization improvement.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.691-693
• /
• 2004

0.18$\mu\textrm{m}$ 표준 셀 라이브러리로 구현할 때 2.69㎱의 임계 경로 지연을 가지는 SIMD구조의 포화 덧셈기를 설계하였다. 기존의 설계에서 임계 경로를 구성하는 CLA를, 8비트까지만 자리올림(Carry)이 전파될 때 정확한 계산을 보장하는 근사 덧셈기의 형태로 설계한 결과, 임계 경로 시간 지연을 약 22% 감소시킬 수 있었다. 파이프라인 구조 프로세서에서 사용될 포화 덧셈기의 근사계산이 실패하는 경우에는, 추가적인 2개의 클록주기 동안 재 계산을 수행하게 된다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.11
• /
• pp.932-939
• /
• 2000

본 논문은 정적 CMOS 회로의 단락 전류로 인한 전력소모와 게이트의 전달 지연시간을 구하기 위한 간단한 방법을 제시한다. 단락전류식은 게이트와 드레인 사이에 존재하는 커플링 커패시턴스의 영사한 후 모형화한 전류 수식을 기반으로 CMOS 회로의 지연 시간을 예측하기 위한 거시모형과 수식들을 제안하였다. 제안된 방법은 시뮬레이션을 통하여 현재의 기술 동향 특성인 신호 천이시간과 부하 커패시턴스가 감소하는 경우에 대해 이전의 연구보다 더욱 정확하고 신속히 예측할 수 있음을 보였다. 또한 제안된 거시 모형은 전류식이 변할지라도 전력소모와 타이밍 수준에서의 지연시간을 계산하는데 쉽게 적용이 가능하다.