• Title/Summary/Keyword: 지역 특성

Search Result 17,572, Processing Time 0.048 seconds

Characteristic Assessment of Heavy Metals in Dusts Collected by the Air Filtration System at Subway Stations in Daegu, Korea (대구지역 지하철역사 공기여과필터 포집먼지에 함유된 중금속성분의 특성평가)

  • Do, Hwa-Seok;Song, Hee-Bong;Shin, Dong-Chan;Kwak, Jin-Hee;Lee, Myoung-Sook;Yoon, Ho-Suk;Kang, Hye-Jung;Phee, Young-Gyu
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.31 no.1
    • /
    • pp.42-50
    • /
    • 2009
  • Samples of subway dust were collected by the air filter system of 30 subway stations on Daegu subway line 1 in January 2008. Samples were sieved below 100 ${\mu}m$, and 14 elements were analyzed using ICP after acid extraction. Results obtained from the source assessment of trace elements using enrichment factor showed that Ca, Fe, K, Mg, Mn, Na, V were influenced by natural sources such as weathered rock and resuspended soil, while Cd, Cr, Cu, Ni, Pb and Zn were influenced by anthropogenic sources such as fuel combustion and waste incineration. Concentrations were remarkably higher in components from natural sources than in components from anthropogenic sources. Anthropogenic sources were significantly affected by indoor dusts than outdoor dusts. Results of pollution indices of heavy metals indicated that indoor dusts were more contaminated with heavy metal ions than outdoor dusts. The correlation analysis among trace elements indicated that components were much correlated in the order of natural sources-anthropogenic sources, anthropogenic sources-anthropogenic sources, natural sources-natural sources in both indoor and outdoor dusts. Trace element components of outdoor dusts were largely correlated than those of indoor dusts. In addition, indoor dusts were significantly affected by outdoor dusts rather than depth from the surface or the average daily number of subway passengers.

A Study on Characteristics of Airborne Asbestos Concentrations at Demolition Sites and Surrounding Areas of Asbestos Containing Buildings in Seoul (서울시내 건축물 석면해체·제거 사업장 및 주변에서의 공기 중 석면농도 특성에 관한 연구)

  • Lee, Jinhyo;Lee, Suhyun;Kim, Jeongyeun;Kim, Jihui;Chung, Sooknye;Kim, Jina;Kim, Iksoo;Eo, Soomi;Jung, Kweon;Lee, Jinsook;Koo, Jayong
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.36 no.6
    • /
    • pp.434-441
    • /
    • 2014
  • This study is purposed to measure airborne asbestos concentrations at demolition sites and surrounding areas of asbestos containing buildings in Seoul and examine whether the measurement results correspond with allowable exhaust standard for asbestos of the Asbestos Safety Control Act. The airborne asbestos concentrations for 37 sites were below the detection limit ($7fiber/mm^2$) in 101 (35%) out of 288 samples. The whole average airborne asbestos concentration in 37 sites was $0.003{\pm}0.002f/cc$(max 0.0013 f/cc) and almost the whole airborne asbestos concentrations were satisfied with allowable exhaust standard for asbestos, 0.01 f/cc, of the Asbestos Safety Control Act. So possibility of asbestos exposure is not yet a major concern at current levels for sites demolished of asbestos containing buildings in Seoul. Looking at each sampling point, the average airborne asbestos concentrations in boundary line of site, entrance of sanitation, around the workplace (in), around the workplace (out), negative pressure units, storage area for waste, outlet for waste and residential area of residents were respectively $0.002{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.005{\pm}0.004f/cc$, $0.005{\pm}0.003f/cc$ and $0.003{\pm}0.002f/cc$. As a result, all sampling points of study were satisfied with allowable exhaust standard for asbestos, 0.01 f/cc, of the Asbestos Safety Control Act.

A Mineralogical and Gemological Studies for the Enhancement of Tanzania Ruby by Heat Treatment (탄자니아산 루비의 열처리에 의한 보석·광물학적 품질개선 연구)

  • Kim, Seon-Ok;Wang, Sookyun;Oh, Sul-Mi;Park, Hee Yul;Park, Maeng-Eon
    • Economic and Environmental Geology
    • /
    • v.47 no.6
    • /
    • pp.563-569
    • /
    • 2014
  • Ruby is one of the most favor colored gem, for beautiful red tone, be high in scarcity value. However, rubies with high quality are produced in restricted regions, such as in Thailand, Sri Lanka, Myanmar, and Tanzania etc., and they have been gradually exhausted by mining for a long period. Therefore, improving qualities of low level rubies with various treatments is arising an alternative way to obtain better rubies. Gemological and mineralogical properties of the natural ruby from Tanzanian were studied with heat treatments. Those characteristics were compared between only heat and adding flux materials under heating. Tanzanian raw rubies were applied a heat treatment ($1,600^{\circ}C$ for 6 hours). However, chromameter and UV-Vis analyses found that a simple heat treatment is inappropriated for the Tanzanian ruby. Although $Cr^{3+}$ containing for red color in the ruby increased with heat treatment, the ruby displays dark medium red because of Fe in the ruby as a form of $Fe_2O_3$. The low transparency after heat treatment is attributed to the recrystallization of $SiO_2$ which has a low melting point. Chromameter confirmed adding Pb-containing flux under heating greatly improves the clarity and color of Tanzanian rubies with micro-fractures and cavities on the surface. EMPA results show that Pb as an additive fills the cavities and cracks on raw Tanzanian rubies during the heat treatment. As a rewult of it, the quality of the Tanzanian ruby raw dramatically improved. These results indicate that the heat treatment with an additive (Pb in this study) is an effective way to obtain better quality of the Tanzanian ruby. Consequently, this study suggests a suitable method to improve the properties of the Tanzanina ruby. The result of this study would provide useful information to upgrade the qualities of similar gem stones such as corundum and sapphire.

Optimization for the Process of Ethanol of Persimmon Leaf(Diospyros kaki L. folium) using Response Surface Methodology (반응표면분석법을 이용한 감잎(Diospyros kaki L. folium) 에탄올 추출물의 최적화)

  • Bae, Du-Kyung;Choi, Hee-Jin;Son, Jun-Ho;Park, Mu-Hee;Bae, Jong-Ho;An, Bong-Jeon;Bae, Man-Jong;Choi, Cheong
    • Applied Biological Chemistry
    • /
    • v.43 no.3
    • /
    • pp.218-224
    • /
    • 2000
  • The efforts were made to optimite ethanol extraction from persimmon leaf with the time of extraction$(1.5{\sim}2.5\;hrs)$, the temperature of extraction$(70{\sim}90^{\circ}C)$, and the concentration of ethanol$(0{\sim}40%)$ as three primary variables together with several functional characteristics of persimmon leaf as reaction variables. The conditions of extraction was best fitted by using response surface methodology through the center synthesis plan, and the optimal conditions of extraction were established. The contents of soluble solid and soluble tannin went up as the concentration of ethanol went up and the temperature of extraction went down, and the turbidity went down as the concentration of ethanol went down. Electron donation ability was hardly affected by the extraction temperature and had the tendency to go up as the concentration of ethanol went up. The inhibitory activity of xanthine oxidase(XOase) had the tendency to go up as both the concentration of ethanol and the temperature of extraction went up. The inhibitory activity of angiotensin converting enzyme(ACE), the significance of which still was not recognized, showed the maximum when the concentration of ethanol was 27%. In result, the optimal conditions of extraction was the extraction time of two hours, the extraction temperature of $75{\sim}81^{\circ}C$, and the ethanol concentration of $33{\sim}35%$.

  • PDF

Comparison of Rice Growth under Subtropical and Temperate Environments (아열대와 온대 기후 하에서 벼 생육 비교)

  • Park H.K.;Xu Migging;Lee K.B.;Choil W.Y.;Choil M.G.;Kim S.S.;Kim C.K.
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.8 no.2
    • /
    • pp.45-53
    • /
    • 2006
  • The objectives of this study are to determine the primary yield components responsible for yield differences in a subtropical environment of the Hunan province China and in a temperature environment of Honam province Korea. Field experiments were conducted in a subtropical environment in Hunan province China during 2002 and in a temperate environment in Honam province Korea during 2003. Seven rice cultivars were grown under optimum crop management in each experiment field. Yield, yield components and plant dry matter were determined at maturation. The highest yield (567 kg/10a) was produced at Honam province by Jinyou 207, a Chinese cultivar, The maximum yield at Hunan province was 453 kg/10a by Sanyou 63. On the average across cultivars, Honam produced 23% greater yields than Hunan. Sink size (spikelets per $m^2$) was responsible far these yield differences. Panicle number per $m^2$ was much greater at Honam.

Processing and Quality Control of Flux Data at Gwangneung Forest (광릉 산림의 플럭스 자료 처리와 품질 관리)

  • Lim, Hee-Jeong;Lee, Young-Hee
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.10 no.3
    • /
    • pp.82-93
    • /
    • 2008
  • In order to ensure a standardized data analysis of the eddy covariance measurements, Hong and Kim's quality control program has been updated and used to process eddy covariance data measured at two levels on the main flux tower at Gwangneung site from January to May in 2005. The updated program was allowed to remove outliers automatically for $CO_2$ and latent heat fluxes. The flag system consists of four quality groups(G, D, B and M). During the study period, the missing data were about 25% of the total records. About 60% of the good quality data were obtained after the quality control. The number of record in G group was larger at 40m than at 20m. It is due that the level of 20m was within the roughness sublayer where the presence of the canopy influences directly on the character of the turbulence. About 60% of the bad data were due to low wind speed. Energy balance closure at this site was about 40% during the study period. Large imbalance is attributed partly to the combined effects of the neglected heat storage terms, inaccuracy of ground heat flux and advection due to local wind system near the surface. The analysis of wind direction indicates that the frequent occurrence of positive momentum flux was closely associated with mountain valley wind system at this site. The negative $CO_2$ flux at night was examined in terms of averaging time. The results show that when averaging time is larger than 10min, the magnitude of calculated $CO_2$ fluxes increases rapidly, suggesting that the 30min $CO_2$ flux is influenced severely by the mesoscale motion or nonstationarity. A proper choice of averaging time needs to be considered to get accurate turbulent fluxes during nighttime.

The Planting and Use of Landscaping Plants in Kangweon-Do (강원도내 조경식물의 배치과 이용)

  • 이기의;이우철;박봉우;조철길
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.15 no.3
    • /
    • pp.33-50
    • /
    • 1988
  • This study was executed to find out how to improve on the planting and use of the plants in Kangweon- Do by surveying the planting areas -gardens, parks, streets, schools, etc. - in five cities of this province, and to select available native plants by surveying the main mountains in this province. The results are as follows ; 1. The species number within surrey areas was 319 species. and the species of which planting frequency was very high were Hibiscus syriacus, Juniperus chinensis, Buxus microphylla v. koreana, etc.. 2. The species number of school trees and flowers of 202 schools in Kangweon-Do were 33 species, 32 species respectively. and the species of school trees and flowers that showed the highest preference were Juniperus chinensis, Forsythia koreana each. 3. The species number of flowers and trees designated in 22 City and Keun were 14 species, 7 species respectively, and the species of flowers and trees that presented the highest designation frequency were Rhododendron schlippenbachii, Ginkgo biloba each. 4. The street trees planted along the main streets in Kangweon-Do were 18 species and 84,939 individuals, and the ratio of Populus alba${\times}$glandulosa was the highest among occurrence individuals. 5, As for the composition ratios of life forms of plants within survey areas, the ratio of deciduous broad-leaved tree was the highest as about 56% and that of deciduous coniferous tree was the lowest as about 1.6%. The ratios of native species versus exotic were 43 : 57 6. Through these results, it was thought that the diversification of planing species, the selection of plants suitable to each space and the generalization of use of native species were needed. So 254 plants native to Kangweon-Do were presented to correspond to these requirements.

  • PDF

A Study on the Change and Management of Historical Landscape Forest of Taeneung, Joseon Dynasty Royal Tomb, Seoul, Korea (조선왕릉 태릉(泰陵)의 역사경관림 변화와 관리방안)

  • Kim, Myoung-Sin;Lee, Kyong-Jae;Kim, Jong-Yup;Hur, Ji-Yeon
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.43 no.2
    • /
    • pp.56-72
    • /
    • 2015
  • This study area for this research was the Taereung of the 2009 World Heritage-listed Royal Tombs of the Joseon Dynasty. The Taereung space was divided into that of the royal tomb space, religious service space, transposition space and entry space. The original vegetation is assumed to have been planted at the right, left and backside of the tomb based on historical research literature. Regarding the original vegetation landscape of Taeneung, it was assumed that Pinus densiflora was distributed around the tomb lines and tomb space, Pinus densiflora was distributed in the religion services space and transposition and Alnus japonica was distributed in the entry space. By the present status of vegetation in Taeneung, the Pinus densiflora forest was the widest area with 50.3% with the broadleaf forest at 33.7%. Quercus aliena, Quercus acutissima, and Quercus mongolica were the main species found in Taeneung. The planting area was 7.9% and Pinus densiflora were the main species planted. To analyze the plant community structure of Taeneung, 108 plots were set and divided into four spaces. The importance of the percentage of those districts was analyzed on a spatial basis and it was found that the current dominant species of the tomb space was Pinus densiflora. However, as Pinus densiflora began dying out, the power of Quercus acutissima increased and an ecological succession from the Pinus densiflora forest to Quercus aliena forest was made. In the spaces of religious services and transposition, Pinus densiflora was decreasing and Quercus spp. was expanded. In the space of entry, the dominant species were Pinus densiflora and Quercus aliena, Pinus densiflora and Quercus aliena. As soil of this area is argillaceous, Pinus densiflora is expected to disappear in the end. The prior vegetation(assumed) and present vegetation of Taeneung were compared and analyzed and a goal of vegetation management and the way in which to manage vegetation were suggested. The goal of vegetation landscape management was to analyze ecological characteristics and vegetation changes, maintain and restore a landscape suitable for historical landscape forests by space. About the space of the tomb, Pinus densiflora forests and Pinus densiflora planting zones forests should be maintained and there should be efforts to restore and manage the Pinus densiflora forests, instead of the Quercus spp. forests. About the space of religious services, Pinus densiflora forests and Pinus densiflora planting zones should be maintained and managed and there should be efforts to restore and manage Pinus densiflora forests to replace Quercus spp. Pinus densiflora forests in the space of transposition should be maintained and managed and Pinus densiflora forests should be restored to replace Quercus spp. trees. Alnus japonica forests should be restored in the space of entry.

A Study on the Establishment and Application of Landscape Height Based on View and Topographical Features - Focusing on the Maximum Height Regulation District around Bukhan Mountain National Park - (조망 및 지형특성에 따른 경관고도 도출과 적용 방안 - 북한산 국립공원 인근의 최고고도지구를 중심으로 -)

  • Chang, In-Young;Shin, Ji-Hoon;Cho, Woo-Hyun;Shin, Young-Sun;Kim, Eon-Gyung;Kwon, Yoon-Ku;Im, Seung-Bin
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.39 no.1
    • /
    • pp.35-45
    • /
    • 2011
  • The landscape of Seoul was dynamically changed and developed with the rapid post-war economic growth. Seoul city designated a height regulation district to preserve and manage the city landscape and protect it from haphazard construction. The designation of a maximum height regulation district has obvious purpose and simple regulations which makes the implementation and management easy to apply yet the altitude restriction lacks an objective basis for its enforcement. Many studies have been done and the current uniform height regulation requires more objective and logical guidelines. This study selected the Bukhan Mountain area, a National Park designated to protect the environment, to present a new landscape height guideline to minimize environmental degradation and to harmonize the artificial and natural landscapes of the area. Document research was done to identify the regulation types(absolute height regulation, view line regulation, oblique line restriction regulation) and principles for height regulation district establishment, acknowledge the current status and issues of the Bukhan Mountain area's maximum height regulation district. Gangbuk-Gu was chosen as the site and survey was conducted on outstanding view points and view corridors of residents. From document research, an appropriate landscape height guideline was selected and applied to Gangbuk-Gu. According to the guideline, suitable heights for buildings were suggested. These were then applied to three-dimensional simulations and a final guideline was suggested.

An Investigation on the Optimal Ship Size for Chemical Tankers by Main Shipping Routes (케미컬 탱커선 운항노선별 최적선형에 관한 연구)

  • Kim, Jae-Ho;Kim, Taek-Won;Woo, Su-Han
    • Journal of Navigation and Port Research
    • /
    • v.39 no.6
    • /
    • pp.439-450
    • /
    • 2015
  • This study objects to find characteristics in chemical tanker markets and to determine optimal chemical tanker size using a total shipping cost in main trading route of asia chemical tankers .Precedent studies of determination of the optimal ship size and case studies about chemical tankers was carried out and tried to introduce a cost model which is applicable to chemical tanker. This study is dependant on numerical analysis and involves scenario analysis to minimize sensitivity of results. This analysis shows as follows. First, 12,000DWT tanker is an optimal size on the 'Far East-Middle East' services, 9,000DWT tanker is a most competitive on the 'Far East-South East Asia' services and 3,000DWT tanker is a most economic size on the 'Inner Far East' services at average market situation. Second, the bigger size of chemical tanker, the more competitive advantage the tanker will obtain when bunker fuel prices rise. Small size ship gets more competitive during bunker prices down. Third, market fluctuation of time charter rate for chemical tanker is less than 20% against its average time charter hire which means less volatile. And tanker's competitiveness per each size is remained mostly same when time charterer rates rise at same proportion. Fourth, bigger size chemical tankers have cost advantages when tanker's quantity of each part cargo increase. And small-sized tanks are more competitive when part cargo scales decrease. For the last, ship's port stay strongly influences on the determination of the optical tanker size. When vessel has shorter port stay, bigger-sized tanker will be more competitive and even can be competitive if applies in short voyage as well.