• Child Health Nursing Research
• /
• v.19 no.3
• /
• pp.168-176
• /
• 2013

Purpose: This study was conducted to examine the effects of case-based learning on the coping ability of daycare center teachers in emergency situations. In the study knowledge of emergency treatment methods, attitude, intention and ability to perform CPR between were examined in an experimental group (daycare center teachers who participated in the small groups discussing case studies and comparing them with their own experience) and a control group. Methods: The study was designed using a nonequivalent control group pretest-posttest design. Sixty-four teachers were recruited from 40 child daycare centers in S city located in J province. Thirty-three teachers were assigned to experimental group and participated in the case-based small group learning. The data were analyzed using the SPSS 18.0 program to perform ${\chi}^2$-test, Pearson correlation coefficients and t-test. Results: The experimental group showed significantly higher posttest scores in knowledge, attitude, intention, and performance ability than those of the control group. Conclusion: The study results indicate that case-based small group learning on coping ability in emergency situation is effective in increasing knowledge, attitude, intention, and performance ability for daycare center teachers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.1
• /
• pp.19-31
• /
• 1982

The purpose of the research is to investigate the applicability of the filter activated sludge process for the treatment of toxic phenolic wastewaters. The experiment for the research was carried out by continuously feeding synthetic phenol wastewater for four periods, and the results show that a synthetic fiber filter is an adequate material for filter activated sludge process when taking consideration of durability, SS removal efficiency and wastewater permeability. The permeability of the filter sharply decreases when the temperature of the reactor is below $10{\sim}15^{\circ}C$ for a long period. In filter activated sludge process, even under high volumetric loading conditions, high phenol removal efficiencies can be attained due to the high microbial sludge concentration in the reactor and consequently low F/M ratio. In this research, the effluent phenol concentration were checked to be below $0.1mg/{\ell}$ at the influent phenol concentrations of $63{\sim}468mg/{\ell}$. During the research very low microbial yield coefficients, 0.035~0.160 kg SS/kg COD removed, were observed and the temperature coefficient for aerobic sludge digestion was measured to be 1.021.

• Journal of dental hygiene science
• /
• v.13 no.1
• /
• pp.83-90
• /
• 2013

The aim of this study was to evaluate the abrasive effect and cleaning power of toothpaste containing tetrasodium pyrophosphate and cellulose. The relative dentin abrasivity, cleaning power by modified Stookey method, dentin abrasivity of brushing after Cola treatment and consumer survey were investigated with control toothpaste containing dental type silica as an abrasive. The results obtained were as follows: 1. Experimental toothpaste hardly influenced dentin abrasivity, but control toothpaste had an effect on dentin abrasivity significantly (p<0.05). 2. There was no significant difference in cleaning power between experimental and control toothpaste (p>0.05). 3. Experimental toothpaste hardly influenced dentin abrasivity, despite 100 or 1,000 times of brushing after Cola treatment, but control toothpaste showed a big increase in dentin abrasivity as the number of brushing has been increased (p<0.05). 4. According to the consumer survey results, there was no difference between control and experimental toothpaste in the satisfaction rate of refreshing sensation, the satisfaction rate of the lasting effect of refreshing sensation and the overall satisfaction rate of the toothpaste (p>0.05). These results showed a possibility to make abrasive free toothpaste having cleaning power without dentin abrasivity.

• Korean journal of applied entomology
• /
• v.29 no.3
• /
• pp.184-189
• /
• 1990

A nuclear polyhedrosis virus (NPV) of the tobacco cutworm, Spodoptera litura would be a promisible agent for the control of the insect. To develop a viral insecticide using S. litura NPV, effect of spray on soybean leaves, temperature, storage, an sunlight on the pathogenicity of the virus were studies as follows: Median lethal concentration ($LC_{50}$) of the virus sprayed on the leaves against the third and the fifth instar larvae were $1.301\times10^{4 PIBS}/ml$ and $1.087\times10^{5 PIBS}/ml$, respectively. On the concentration of $1.0\times10^{5 PIBS}/ml$, median lethal times ($LT_{50}$) were 7.3 days for the 3rd and 8.9 days for the 5th instar larvae. Stability of S. litura NPV was quickly decreased at the higher temperate than $60^{\circ}C$ and at the longer exposure to the higher temperature. Storage of the virus at $-20^{\circ}C$ was kept higher pathogenicity than $4^{\circ}C$ and $25^{\circ}C$. Viral activity was maintained more than 10 days in the sprayed-under leaves, but decreased at 3 day after spray in th sprayed-on the leaf surface when exposed the virus to sunlight.

• Journal of Environmental Impact Assessment
• /
• v.29 no.2
• /
• pp.144-155
• /
• 2020

This research developed an approach to identify ecologically important areas at local scales and explained how the results of this approach could contribute to extend the protected areas in the Republic of Korea (ROK). While most developed countries have considered various biotic and abiotic factors, ecological processes, migration routes, habitat connectivity, ecosystem services, and etc. to determine the protected areas, ROK has considered a few factors focusing on biodiversity, landscape, and the habitats of endangered organisms. However, for sustainable management of our nature, we need comprehensive understanding of various ecosystem factors and interactions among them at local scales in designating protected areas. Forthis, we developed a conceptual model based on the ecological engineering approach and then explained how the results of this approach could contribute to extend the protected areas. In particular, we considered future land-use and climate change in determining the priority areas for novel protected areas. Our research suggested an effective methodology 1) to include various ecosystem factors and 2) to consider future environmental changes as well as current environmental conditions in finding the ecologically important areas and prioritizing these areas. However, our approach has limitations on the real-world applications due to the lack of fundamental information and data on our ecosystems. To improve the effectiveness of our approach in the real-world applications, we need various long-term ecological research results, environmental and ecological monitoring data, and both current and future spatial environmental data.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.5
• /
• pp.485-500
• /
• 2020

Due to various advantages such as small facilities, ease of construction and so on, the grouting technology which is widely used in construction field has developed remarkably compared with the past. However, the efforts to improve the homogeneity of quality, long-term durability and environmental problems have been continued. In recent years, new grouting method has been developed in order to solve problems such as low strength, durability and leaching phenomenon of liquid glass (sodium silicate) grouting material in Korea. A newly developed method integrates the injection material with the ground by the self-healing material of crystallization growth type. For this reason, it is known that improvement of the durability and water quality of the ground, prevention of leaching, and environment friendliness can be expected. The present study applied a newly developed method to test sites and verified its effect such as injection range, improvement effect, waterproofing performance and so on. Standard penetration test, field permeability test, borehole shear test, pressuremeter test and pH test were conducted, and the results were compared between before and after developed method application. As results of tests, the field applicability and improvement effect of developed method were proved to be excellent.

• Journal of Bio-Environment Control
• /
• v.26 no.2
• /
• pp.78-86
• /
• 2017

Humans are provided with a wide range of public benefits from ecosystems and agricultural ecosystems, but the establishment of the horticulture complex could be a space that hampers the public function of the agricultural ecosystem. In this study, we sought to focus the function of landscape creation of agricultural landscape and tried to analyze the landscape of the horticulture complex. Therefore, This study aims to suggest ways to build a greenhouse complex which is being indiscreetly introduced in the agriculture landscape through environmentally-friendly manner and minimize the function of the ecosystem service. We divided the greenhouse complex into two categories of Plastic Greenhouse(v) and Glass Greenhouse(g), and compared them to the Netherland and Japan counterparts. Each image of research areas was selected by 3 pics and polled by a total of 101 people. The results of the Evaluation of Landscape Image are as shown in the figure. Netherland Glass Greenhouse scored 1.80 in terms of 'Neat' which is one of the given 15 adjectives. Study results shows that Korean Plastic Greenhouse landscapes need to endeavor Japanese vinly greenhouses and Dutch glasshouses. Consequently, an analysis on the elements of landscapes including green area, variant elements, separation distance is essential in order to improve our country's greenhouse complex landscapes. In this regard, continuous research is required to improve rural landscapes and harmonize large-scale horticultural facilities into the existing agricultural ecosystem.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.597-601
• /
• 2006

There are considerable amount of man power and time spent for analysis and selection of various materials due to the inadequate application system and rapid searching process of material related information in each stage of building production process. Also, due to the insufficiency in recycling system of important information created for each process, they are hoarded at each task stage and project completion. As a result, because of the repetition of the similar/identical tasks on each process, it is the major reason for impeding the efficient employment of manpower of the company and decreasing competition of the company. Moreover, in selecting finish material in the project field, there are many difficulties due to the lack of technical information such as product characteristics and field applications. The construction quality also affects the profit and loss of the product which calls for a need to develop continued information management system that the finish material related examples could be shared in real time. The objective of this study is to propose a building finish material information which the real time research and application is possible to raise the productivity. TO do this, the current material information task status analysis and questionnaire research should be conducted to understand the demand of system development and reflect the result onto the system for easy access and application. Therefore, the building finish material information system for enhancement of productivity of construction task proposed in this study is expected to be utilized in enhancement of construction quality, maximization of company profit, and strengthening of company competition.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.154-160
• /
• 2006

There wasn't very successful practice cases for the quantity take-off based on the CAD system since the CAD system is used in the construction industry more than 20 years in Korea. It was also not easy to use 3D CAD system in design management and cost management in the construction industry although 3D CAD system is very successful in the manufacturing industry for those areas recently. It is important to construct 3D libraries and to supply those libraries for the designers in time. Architectural work is a kind of creative work. So, Architects like to create their own model. Unlike the manufacturing industry, 3D CAD system can not be survived in the construction industry without new 3D objects supply in the right time. Moreover, the estimation system for 3D must support the schematic design phase, detailed design phase and construction design phase. The product called "Constructor" of Graphisoft consist of modeller, estimator and scheduler based on 3D model. We applied the system to a real project and compared the estimation result and we made a very successful case study.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.5
• /
• pp.315-323
• /
• 2015

Damage level of coastal structures has been scaled up according to increase of wave height and duration of the storm due to the abnormal global climate change. So, the design criteria for new breakwaters is being intensified and structural strengthening is also conducted for the existing breakwaters. Recently, interlocking concept has been much attention to enhance the structural stability of the conventional caisson structure designed individually to resist waves. The interlocking caisson breakwater may be survival even if unusual high wave occurs because the maximum wave force may be reduced by phase lags among the wave forces acting on each caisson. In this study, the dispersion characteristics of wave forces using interlocking system that connect the upper part of caisson with cable in the normal direction of breakwater was investigated. A simplified linear model was developed for computational efficiency, in which the foundation and connection cables were modelled as linear springs, and caisson structures were assumed to be rigid. From numerical experiments, it can be found that the higher wave forces are transmitted through the cable as the angle of incident wave is larger, and the larger the stiffness of the interlocking cable makes larger wave dispersion effect.