• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.25-31
• /
• 2010

Road design guideline provides the directions on how to design a road alignment based on design speed, and this guideline has a design expectation in that design speed is supposed to be equal to the operating speed of drivers. Horizontal curve design is also based on design speed, and minimum radius is derived based on the drivers comfort while negotiating the curve. However, side friction reflecting drivers comfort is lower than a physical friction measured on wet road surface, therefore, it is reasonable to regard the criterion on minimum radius has a safety margin. Futhermore, the practical preference of choosing the larger radius than minimum leads to a noticeable gap between design speed and operating speed, so links to the violation of design expectation implicated in the guideline. In order to review this assumption, friction and operating speed at rural roads was measured and observed. As the results, a safety margin brought out by the gap between comfort-based friction and measured friction is qualitatively derived. Also, the gap between design speed and operating speed presumably caused by the safety margin and practical preference is analysed. By this, it is suggested that current design guideline should provides not only the minimum radius but also the management of road alignment design to minimize the gap between the design speed and operating speed.

• Journal of Korean Society of Transportation
• /
• v.18 no.2
• /
• pp.17-26
• /
• 2000

LOS(Level of Service), the qualitative measure describing operational condition of highway, must be evaluated as quantative index in terms of user service. So, This study is focused on developing the user cost function that user cost is measured in the variation of V/C, MOE(Measure of Effectiveness) of LOS in basic Section of highway. The user cost is calculated as the sum of accident cost, operation cost, travel time cost. The data is collected in the four basic section of Singal-Ansan and Jung bu Highway. As the result of user cost function analysis, the user cost is the lowest When V/C is 0.54. Considering the V/C ratio(0.7) of Basic Section in rural highway suggested in KHCM, We find out that the LOS suggested KHCM increase the user cost of highway.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.58-69
• /
• 2002

Most of the traffic accidents are a rear-end collision and a clash generated in the signalized intersection on the local roads. So, it is demanded that the high-quality of signal control and dilemma zone control. According to the cases generated by foreign countries, we established the strategies which are composed of Volume-Density Control, strategy of the dilemma zone control using R-detector (microwave detector) In Japan and EC-DC Control. MOEs(Measure of effectiveness) are car numbers in the dilemma zone , max-out probability in the safe side and the average stopping delay in the progress side. We choose a signalized intersection in rural highway to analyze the effect of the strategies and practiced an on-the-spot survey. The result of the survey is applied to the basic data in the simulator. Consequently, strategy of the dilemma zone control using R-detector(microwave detector) in Japan is the best effective in the safe side and EC-DC control is the best in the progress side. Based on the result, we developed the effective strategy of the signal control . This strategy is composed of the strategy of Japan and the detector on the stopping line used in the EC-DC control. On the result of the analysis, new strategy is the best effective in two sides.

• Journal of Korean Society of Transportation
• /
• v.31 no.5
• /
• pp.48-59
• /
• 2013

Normally the benefits concerned in the feasibility study for highway constructions are travel time saving, vehicle operation cost, etc. which can be calculated using the simulation tool(EMME3). However, there must be extra benefits of driving amenity improvement that drivers can perceive through decreasing driving fatigue and improving driving comfortability. In this study, the definition of driving amenity was established and a method of estimation for the benefit of driving amenity improvement was developed. Highway type (urban/rural highway) and highway density was considered to estimate the driving amenity. And Double-bounded Dichotomous Choice among Contingent Valuation Method(CVM) was applied to survey the willingness-to-pay of drivers when highway density decreases. Finally the value of driving amenity was estimated using the results of survey and logit medel. As the existing highway density is high, willingness-to-pay increases in both urban and rural highways. Even though the changing rates of highway density are same, willingness-to-pay is different based on the existing highway density.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.79-88
• /
• 2007

Design Hourly Volume (DHV) is the hourly volume used for designing a section of road. DHV is also used to estimate the expected number of vehicles to pass or traverse the relevant section of road in a future target year. The Design Hour Factor (DHF) is defined as the ratio of DHV to Average Annual Daily Traffic (AADT). In addition to high precision of predicted traffic volume, in order to design a roadway to be the proper scale, applying appropriate DHFs considering traffic flow characteristics and type of area which surrounds the relevant roadway is important. This study categorizes sections of expressway (Suh Hae An Expressway) according to their area type and estimates DHFs utilizing traffic data obtained from a vehicle detection system (VDS). This study shows that DHFs calculated using VDS data are different from those using traffic data acquired from a coverage survey. While AADTs from both data show similar values, peak hour volumes from both data show significant differences especially for recreational areas. DHFs from the coverage survey are quite different from the values provided by the Korean design guide or previous research results and DHFs for urban areas are higher than recreational areas. However, DHFs from VDS shows similar values to previous research results. The result of this study suggests that using VDS for estimating DHFs is more reliable than using a coverage survey.

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.87-94
• /
• 2002

2001년 경찰청 $\ulcorner$2001년판 교통사고통계$\lrcorner$ 자료에 의하면 사고피해의 정도를 나타내는 치사율에 있어서 중앙선침범사고가 과속사고와 함께 가장 높은 수치를 보이고 있으며, 대형 교통사고의 39.5%가 중앙선 침범에 의해 발생한 것으로 나타났다. 실제로 2000년 한 해 동안 총 사고건수 290,481건 중 중앙선 침범에 의해 18,931건 (6.52%)의 교통사고가 발생하여 사망자 1,472명, 부상자 35,046명으로 전체 교통사고 사망자의 14.38%, 부상자의 8.21%를 점하고 있는 것으로 나타났다. 이와 같이 전체 교통사고에서 중앙선침범사고가 차지하는 비중 이 높아지고 있어 중앙선침범사고를 줄이기 위한 대책의 일환으로 중앙분리대, 표지병, 시선 유도봉 등과 같은 중앙선침범 예방시설물을 설치하고 있으나, 해당 시설물에 대한 설치기준이 없는 실정이다. 이렇듯 중앙분리대 설치기준의 부재로 인해 중앙선침범사고 발생과 이에 따르는 경제적인 교통사고 비용손실, 그리고 중앙분리대의 과다설치로 인한 국가 재원의 낭비는 간과할 수 없는 문제점을 내포하고 있다. 이러한 점에 착안하여 기존에 지방부 2차로 도로의 직선부에 대한 중앙선침범사고 예측모델이 개발되었고 본 연구에서는 그 연장선상에서 지방부 2차로 도로의 곡선부에 대한 중앙선침범사고 예측모델에 대한 중앙선침범사고 예측모델의 개발을 통해 중앙선침범사고에 대한 사회적 비용을 산정하고, 현재 설치하여 운영중인 중앙선침범 예방시설물의 설치비용간의 비용-편익분석을 통해 얻어진 기준으로 중앙선침범 예방시설물 설치의 가부에 대한 보다 현실적이고 비용-효율적인 중앙선침범 예방시설물 설치기준을 제시함으로써 교통사고 비용손실을 최소화하고, 중앙분리대의 효율적 설치방안의 도입을 통한 경제적 이익창출을 도모하고자 한다.

• Journal of Intelligence and Information Systems
• /
• v.29 no.3
• /
• pp.79-101
• /
• 2023

The current status of local road pavement management in Jeollabuk-do only relies on the accomplishments of the site construction company's pavement repair and is only managed through Microsoft Excel and word documents. Furthermore, the budget is irregular each year. Accordingly, a systematic maintenance plan for local roads is necessary. In this paper, data related to road damage and road environment were collected and processed to derive possible areas which could suffer from road damage. The effectiveness of the methodology was reviewed through the on-site inspection of the area. According to the Ministry of Land, Infrastructure and Transport, in 2018, the number of damages on general national roads were about 47,000. In 2019, it reached around 38,000. Furthermore, the number of lawsuits regarding the road damages were about 93 in 2018 and it increased to 119 in 2019. In the case of national roads, the number of damages decreased compared to 2018 due to pavement repairs. To measure the priorities in maintenance of local roads at Jeollabuk-do, data on maintenance history, local port hole occurrence site, overlapping business section, and emergency maintenance section were transformed into data. Eventually, it led to improvements in maintenance of local roads. Furthermore, spatial data were constructed using various current status data related to roads, and finally the data was processed into a new form that could be utilized in machine learning and predictions. Using the spatial data, areas requiring maintenance on pavement were predicted and the results were used to establish new budgets and policies on road management.

• Journal of Animal Science and Technology
• /
• v.51 no.1
• /
• pp.69-74
• /
• 2009

This study was carried out to investigate the carcass characteristics of crossbred pigs according to mating system, carcass grade and age at marketing. A total of 656 pigs of 128 gilts and 528 barrows were collected and analyzed at public slaughter house. Differences between LY and LYD crossbred on marbling score and water holding capacity were significantly (p<0.05) found. The influences of LY and LYD crossbred on carcass weight, backfat thickness, meat colour, carcass grade and age at marketing were not significantly showed. The carcass weight of D carcass grade was significantly (p<0.05) heavier than that of the other grade. The backfat thickness was significantly (p<0.05) appeared gradually in accordance with the increase of carcass grade. There was significantly difference among the carcass grades on water holding capacity (p<0.05). The differences among the carcass grades on the meat colour, marbling score and age at marketing were not found significantly. The carcass weight of high age group at marketing was significantly heavier than that of the low age group (p<0.05). The backfat thickness of the group of high age at marketing was significantly thicker than that of the group of low age (p<0.05). There were significant differences among age group at marketing in marbling score, carcass grade, and water holding capacity, respectively (p<0.05). The carcass weight was positively correlated with the backfat thickness but negatively correlated with the carcass grade. The correlation between the backfat and carcass grade was significantly negative. The meat colour was negatively correlated with water holding capacity.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.47-56
• /
• 2008

Generally, accident exposure at intersections is relatively higher than that at roadway segments due to more possibility of merging, diverging, turning, crossing, and weaving maneuver. Furthermore, the traffic accident rate at intersections has been rapidly increasing since 1990's. Since there is more opportunity of conflict at unsignalized intersection, frequency and severity of traffic accident are more severe than signalized intersections. The purpose of the study is to analyze factors causing vehicle crashes and provide intersection design guidelines to improve intersection safety. For this study, vehicle to vehicle crash data of 116 rural 3 legs unsignalized were collected and field surveys were conducted for traffic and geometric conditions. Ordered probit models were developed to analyze the severity of crashes. It was found that weather, obstacles in minor roadsides, presence of major exclusive right lane, presence of major road crosswalk, difference between posted speed of major road and minor road, land-use around intersections, shoulder width of major road, ADT of major road are significant factors for intersection safety.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.53-63
• /
• 2008

Even though accident frequencies in roadway segments have been decreasing since 2000, there has been increasing the number of vehicle crashes at intersections. Due to this increase, safety problems at intersection recently started to be regarded as significant issues. The purpose of this study is to analyze the effects of road conditions, traffic operational conditions, and other influencing condition on intersection safety. Then a traffic accident frequency prediction model to evaluate the safety at intersections was developed based on the correlations between influencing factors and vehicle crashes. In this research, critically significant factors affecting vehicle crashes at rural four-legs signalized intersections were investigated. It was found that Poisson regression was the best fit method to developing a accident frequency modeling using the collected data in this study. Through this study, it was concluded that exclusive left turn lane, crosswalk, posted speed, lighting, angle, and ADT are significant influencing factors on the intersection safety.