• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.296-300
• /
• 2007

본 연구에서는 강원도 정선지역 및 삼척지역의 폐탄광 지역에서 관측된 지반침하지역의 공간자료와 각종 지반침하 관련요인을 분석하여, 지질학적구조와 지역적 특성이 상이한 지역에서 지반침하에 직접적인 영향을 주는 공통요인을 찾아내고자 하였다. 연구지역의 지반침하 관련요인들에 대해 GIS(Geographic Information System)를 이용하여 래스터 데이터베이스를 구축하고 모든 요인을 이용하여 분석한 위험지역과 하나의 요인씩 제거하며 분석한 위험지역을 비교하는 민감도 분석 (Sensitivity analysis)을 통해 지반침하와 연관성이 높은 요인을 추출하였다. 민감도 분석은 서로 다른 두 지역에 대해 수행하여 그 결과를 비교하였으며, 갱으로부터의 수평거리，RMR(Rock Mass Rating), 지하수 심도가 지반침하에 영향을 주는 공통요인으로 분석되었다. 본 연구결과, 폐탄광지역의 지반침하에 공통적으로 영향을 끼치는 주 요인을 구할 수 있었으며, 타 지역에서 지반침하 예측시 기존 연구에서 사용한 요인들의 데이터를 전부 구하지 못하는 경우에도 최소한의 필요한 요인을 정할 수 있으며 지반침하 예측의 효율성을 높일 수 있을 것이라 기대된다.

• Tunnel and Underground Space
• /
• v.15 no.3 s.56
• /
• pp.195-212
• /
• 2005

Surface subsidence which occurs with several reasons, such as collapse of gangway, discharge of groundwater, compaction of weak rock mass, and tunnel excavation in shallow depth, gives rise to a serious problem in national infra-structures. In this study, therefore, the mechanism of subsidence has been examined numerically to overcome the passive approach on subsidence occurrence area. With many kinds of numerical studies, the major geotechnical parameters have been selected and the weighted values have been defined for each parameters. Also the authors developed the numerical program which can estimate the possibility of subsidence occurrence, and proposed the decision method for objective and quantitative guideline. It is anticipated that this research will be helpful to establish the hazard map on subsidence region.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.299-302
• /
• 2002

침하지반의 지하구조 해석을 위한 방법으로 전기비저항, 지하투과레이더, 굴절법 탄성파탐사를 실시하였다. 침하가 발생한 지점을 중심으로 조사를 실시하여 보강을 위한 경계를 설정하였으며 그라우팅 보강공사가 이후에 재차 시행되었다. 지반의 침하는 원지반 상부 연약지반에서 발생하였으며 침하량은 최대 50cm 정도이다. 침하의 원인은 해수 유입에 따근 지지력의 감소가 주된 원인으로 추정되며 보강공사 후 상부 연약지반의 전기비저항은 원지반과 거의 같은 크기를 보여준다.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.53-57
• /
• 2009

녹산국가산업단지는 부산광역시에서 서쪽의 연안매립지 형태의 공업단지이며, 이 지역은 1990년대 초반부터 약 10여년간에 걸쳐 산업단지가 조성되었다. 녹산국가산업단지는 연안 매립에 따른 연약지반으로 인하여 지반침하현상이 지속적으로 발생하고있으며, 이와 같은 이유로 2000년대 초반에는 침하계를 이용하여 지반침하현상을 관측하였다. 레이더 차분간섭도를 이용한 지표변위는 침하계 자료와의 비교 및 분석을 통하여 연구지역의 지반침하현상을 지속적으로 관측할 수 있으며, 실측 자료가 획득되지 못한 2000년대 중반과 후반의 지반침하현상도 측정할 수 있는 장점을 지니고 있다. 이번 연구는 2002년부터 2003년까지 획득된 RADARSAT-1 F4 fine-bem모드와 2004년부터 2007년까지 획득된 ENVISAT IS-2모드를 이용하여 2000년대 초반부터 후반까지의 녹산국가산업단지의 지반침하현상을 관측하고 이를 분석하는데 있으며, 관측결과 약 4년동안 최대 33 cm의 침하량을 보이는 곳도 있었다. 이 결과는 C-band 레이더 위성자료의 차분간섭도가 국가 주요시설물 지역의 지반침하 측정에 유용한 정보를 제공할 수 있는 중요한 사례가 될 것이다.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.8
• /
• pp.39-44
• /
• 2016

Ground deformation around construction site in urban area where typically adjacent structures are located needs to be strictly controlled. Accordingly, it is very important to precisely monitor the ground deformation. Settlement beacon is typically employed to measure the ground deformation, but meanwhile the rapid development in electronic technology enables 3D image scanner to become available for measuring the ground deformation profile in usual construction sites. With respect to the profile measurement, the 3D scanner has an advantage, whereas its accuracy is somewhat limited because it does not measure the displacement directly. In this paper, we developed a conditional merging technique to combine the ground displacement measured from settlement beacon and the profile measured by the 3D scanner. Synthetic ground deformation profile was generated to validate the proposed technique. It is found that the ground deformation measurement error can be reduced significantly via the conditional merging technique.

• Geotechnical Engineering
• /
• v.13 no.6
• /
• pp.5-12
• /
• 1997

Predictions of settlements under preloading for the improvement of soft soil is a very important element of construction management. Due to the non uniformity, difficulty of estimating resonable soil properties, predictions of settlements and settlement velocities at the design stage seldom agree with the actual future settlements. To overcome this problem, the prediction methods based on the settlement observation of initial preloading stage such as hyperbolic method and Asaoka method have been employed frequently. However the estimating method for the reliability of these predictions at the time of prediction has not been suggested. In this study, comparisons of predicted settlements by hyperbolic met hed and observed settlements are explored through case studies. And a stratagem of estimating reliability of settlement predictions by hyperbolic method is suggested as the result of investigation on the relationship between the initial observed time and error of settlement prediction by hyperbolic method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.914-921
• /
• 2010

When industrial structures are constructed on soft ground, ground subsidence is occurred by problems of bearing capacity. To protect ground subsidence have to improve soft ground, and have to predict settlement estimation for reasonable construction. Artificial Neural Networks(ANN) is adopted for prediction of settlement of construction during the initial design. In the study, Artificial Neural Networks are applied to predict the settlement estimation of initial condition ground and ground improved by D.C.M method. Also, this study compares results of Artificial Neural Networks and results of continuum analysis using Mohr-Coulomb models. In result, settlements of initial condition ground decreased over 0.7 times. Also, by comparing ANN and continuum analysis, coefficient of determination was comparatively high value 0.79. Thought this study, it was confirmed that settlements of improvement ground is predicted using laboratory experiment data.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1105-1123
• /
• 2018

The main risk factors of tunnel excavation through urban areas are ground settlement and surface sink which caused by ground conditions, excavation method, groundwater condition, excavation length, support method, etc. In the process of ground settlement assessment, the numerical analysis should be conducted considering the displacement and stress due to tunnel excavation. Therefore a technique that can simplify such process and easily evaluate the influence of tunnel excavation is needed. This study focused on the tunnelling-induced ground settlement which is main consideration of underground safety impact assessment. The parametric numerical analyses were performed considering such parameters as ground conditions, tunnel depth, and lateral distance from tunnel center line, etc. A simplified ground settlement evaluation chart was suggested by analyzing tendency of ground subsidence, lateral influence area and character by depth. The applicability of the suggested settlement evaluation chart was verified by comparative numerical analysis of settlement characteristics.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.12
• /
• pp.35-42
• /
• 2012

There are many large-scale coastal region landfill and land development by loading to use territory efficiently, this regions are mostly soft clay ground. Constructing structures and road on the soft ground bring about engineering problems like ground shear fracture and a big amount of consolidation by bearing capacity. Improvement of soft soil is required to secure soil strength and settlement control. In improvement of soft soil, predict for the amount of settlement based on field surveyed reports are important element for estimating pre-loading banking height and the final point of consolidation. In this study, there is calculating theoretical settlement by analyzing field surveyed report and ground investigation to improvement of soft soil with pre-loading and vertical drain method. And present settlement prediction method reflect soil characteristics in Gimpo Hangang site by analysing prediction settlement and observational settlement during compaction using hyperbolic, ${\sqrt{s}}$, Asaoka method.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.77-88
• /
• 2006

A series of model tests were performed to investigate the ground deformation during trench excavation for diaphragm walls. An apparatus was manufactured to observe the failure pattern of a slurry-supported trench in sandy ground. Ground deformations including settlement and lateral displacement of the surrounding ground adjacent to the trench were carefully monitored during excavation. Experimental observations indicated that the settlement of the adjacent ground increased with closing to the trench. Especially, the considerable settlement occurred at the distance which was equal to 40% of the excavation depth. And, the higher settlement was obtained when the relative density of ground was looser and the ground water table was higher. Also, the lateral wall face of excavated trench was bulged with lowering the slurry level In stages and then the upper part of trench failed finally. The envelope of ground surface settlement could be represented as a hyperbolic line and the measured settlement was smaller than those predicted by Clough and O'Rourke (1990).