• Title/Summary/Keyword: 지면 이륙

Search Result 5, Processing Time 0.017 seconds

Helicopter Landing Gear Ground Reaction Simulation (헬리콥터 강착장치 시뮬레이션)

  • 최형식;전향식;오경륜;배중원;남기욱
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 2004.05a
    • /
    • pp.131-135
    • /
    • 2004
  • Landing gear force reaction module is important for aircraft take off and landing simulation. But usually this modulo is not accounted for control law design simulation. because it does not affect the flying quality of aircraft. Now a days, this module is getting more important according to the increase of needs for training purpose simulation and specific control law design such as unmaned aircraft landing on the moving platform. In this paper 1DOF mass spring simple force system per gear was accepted.

  • PDF

Experimental Analysis of the Ground Take-off Flight of a Butterfly (지면이륙하는 나비의 날개짓 분석)

  • Jang, Young-Il;Lee, Sang-Joon
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2008.03b
    • /
    • pp.142-143
    • /
    • 2008
  • In the present work, high-speed video images of the ground take-off flight of a live butterfly were captured and their dynamic motions during the first full-stroke were analyzed. To capture the dynamic images of the take-off motion, the experimental setup consisted of a high-speed camera, a Xenon lamp as a light source and a transparent chamber of $15^W{\times}15^L{\times}17^H$ $cm^3$ in physical size. The ambient temperature and supplementary lighting devices were precisely controlled. The weight and wing span of the butterfly tested in this study was 104 mg and 63.14 mm, respectively. The ground take-off images were captured with 4000 fps with a spatial resolution of (1024${\times}$512) pixels. The period of the first full-stroke was 80.5ms and the flapping speed of downstroke was 2 times faster than that of upstroke. As a result, butterflies used the fling and near-clap motion to generate lifting force and an interesting take-off behavior of early pronation and downstroke was observed.

  • PDF

A Study on B737NG Aircraft Tail Strike during Takeoff (B737NG 항공기 이륙 중 미부지면접촉에 관한 연구)

  • Noh, Kun-Soo
    • Journal of the Korean Society for Aviation and Aeronautics
    • /
    • v.17 no.4
    • /
    • pp.70-75
    • /
    • 2009
  • According to the aviation statistics, tail strike incidents and accidents are cyclic. Although many tail strikes occurred during takeoff, these are less than during landing cases. Many cases are related on human factors. In my opinion it is possible to analyze the causes of takeoff tail strikes to some extent. There are major casual factors of tail strike during takeoff such as; (1) Mis-trimmed horizontal stabilizer (2) premature rotation prior to $V_R$ (3) Excessive pitch up rate during rotation (4) Improper use of the flight director. Among these causes improper use of flight director is excluded in this paper because it is recommended that pilot should use flight director after airborne. So I analyzed the other three causes as following. Firstly, because mis-trimmed stabilizer is related to center of gravity(CG), the relationship between stabilizer and CG is reviewed. Secondly, concerned premature rotation prior to $V_R$ I reviewed the background of rotation speed($V_R$) establishment and analyzed theoretically what speed leads to tail strikes. Thirdly, concerning excessive pitch up rate during rotation I analyzed what excessive pitch up rate can decrease ground clearance while using FDR data.

  • PDF

Aerodynamic Characteristics of WIG Effect Vehicle with Direct Underside Pressurization (DUP (Direct Underside Pressurization)을 가진 위그선의 공력특성에 관한 연구)

  • Lee, Ju-Hee
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.38 no.7
    • /
    • pp.655-663
    • /
    • 2010
  • DUP (direct underside pressurization) is a device that can considerably increase lift, reduce take-off speed and minimize hump drag when a WIG effect vehicle takes off on the water surface. A 3-dimensional numerical investigation of a WIG effect vehicle with DUP is performed to analyze aerodynamic characteristics and the static height stability. The model vehicle, named Aircat, consists of a propeller in the middle of a fuselage, an air chamber under the fuselage, Lippisch-type wings and a large horizontal T-tail. The lift is mainly increased by the stagnation of the accelerated air coming into the air chamber through the channel in the middle of the fuselage. However, the accelerated air increases drag as well as reduces static height stability.

Flow Characteristics of WIG-Effect Vehicle with Direct-Underside-Pressurization System and Propeller (DUP와 프로펠러가 있는 위그선 주위의 유동특성)

  • Lee, Ju-Hee;Kim, Byeong-Sam;Park, Kyoung-Woo
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.6
    • /
    • pp.649-654
    • /
    • 2010
  • A three-dimensional numerical study of the WIG-effect vehicle with a direct-underside-pressurization (DUP) system and a propeller is performed to analyze the aerodynamic forces and moments acting on the vehicle. The computational model includes all the compartments of a WIG-effect vehicle, including a propeller in the middle of the fuselage and an air chamber under the fuselage. The DUP system and propeller help considerably reduce the take-off speed and minimize the effect of the hump drag when the vehicle accelerates to take off on water. The airflow is accelerated by a propeller, and the air then enters the air chamber through a channel in the middle of the fuselage, this air helps increase the lift since the dynamic pressure of air is converted to static pressure. However, the air accelerated by the propeller produces excessive drag and creates yawing moment. It is found that the effect of yawing and rolling moments on static stability is negligible.