• Korean journal of applied entomology
• /
• v.7
• /
• pp.5-13
• /
• 1969

Present system of seed potato production in Korea has several weak points and consequently has difficulties in covering annual shortage of 60,000 tons of seed potatoes. The author has an opinion that this so called 'High land system' of seed potato production adopted by the Government should be replaced by the 'Coastal area system' which is proposed by the author and has many advantages over present 'High land system'(2). In coastal areas where enormous acreage of rice paddies are spread, mostly around the villages. the primary host plants of the vectors are found. Therefore, the only source of aphid vectors are limited to the villages. The farmer's houses scattered more sparsely also have minor importance. In the previous paper(2), the author reported that the aphid vector populations were lower in the coastalareas than at Taegwanryong where the Alpine Experiment Station for the production. of seed potatoes is located. However, the number to vectors at Okku showed rather high density, where the trap was placed at the distance of 200 m from a village where peach and Hibiscus trees, the primary hosts of Myzus pesrsicae and Aphis gossypii were grown. To clarify the flight distance from the source of the aphid vectors, a trial was carried out in the Kwanghwal area, Kimje-gun, Cholla-pukto. on the western coast. 13 traps were placed at four directions and the distances between the traps were 250 m. (Fig. I) The traps 'Were operated from June 21 to October 31. The results are shown in Table 1. A total of some 70 species of aphids were found, including 5 speceis of potato virus vectors. The vectors are as follows: I. Myzus persicae (Sulzer) 2. Aphis gossypii Glover 3. Aulacorthum solani (Kaltenbach) 4. Lipaphis erysimi (Kaltenbach) 5. Macrosiphoniella sanborni (Gillette) Out of a total of 12,797 aphids, 5,187$(48\%)$ vectors were found. The trap catches at the 13 locations are shown in Fig. 2 and the numbers of the vectors at each location for each vector, except Macro-siphoniella sanborni. of which only a single individual was caught, are shown in Fig. 3-6. Number of vectors at C (3,279) (Centre of the village) is considerably higher than that at Suwon (763); however, EI. SI. WI and NI. where the distanecs from Care 250 m, showed lower numbers of vectors than that at Taegwanryong (347). The number of vectors at NI was rather than at the other 3 locations at the distance of 250m from the village. This was because C was in the southern part of the village. Consequently NI was much closer to the village than the other 3 locations of the same distance from C. Numbers of catches of the most important vector. Myzus persicae, are shown in Fig.3. The distribution pattern is typical except $S-2\;and\;W_3$, where several farmer's houses were found. If only the rice paddies were found in these locations. the numbers of the vectors would be small as the distances increase. Numbers of catches of the other 3 vectors are shown in Fig. 4-6. From these results. the author has drawn the following conclusions: 1. The aphid vector sources at the rice paddy belt in the western coast are the villages. 2. The vector densities at the locations where the distances are 250 m from the centre of the village are lower than that at Taegwanryong. 3. The vector densities become gradually lower as the distances from the centre of village increase. However. depending on the host plant situation at each location, the vector densities are variable. These minor sources of aphid vectors may be eliminated so that seed potatoes can be grown. 4. Thus. under the direction of specialists, fields suitable for seed potato production can be found in the coastal areas.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.77-87
• /
• 2013

About 1,800 villages have released from Greenbelt since Greenbelt-reform-policy for readjustment of the area was promoted after 1997. Even though the government intended to attract planned development & improvement of these lifted villages through District Unit Plan and designating the lifted area as low-rise and low-density zoning considering the characteristics of the Greenbelt region, there are still many problems to be solved: a lack of funds, insufficient capability for self-improvement and unexecuted SOCs in long-term etc. It seems that these problems are caused by focusing on the lifting areas itself instead of researching deeply the condition and characteristics of the villages and searching proper direction/plans of improvement before lifting Greenbelt In addition, the existing plan of village improvement and management was not considering physical and spacial characteristics of the areas, social and economic situation of residents and relationship between the villages and surrounding cities, though these conditions are different among each villages, and the related regulations are applied uniformly across all the villages and those have been causing many civil appeals and environmental problems. In these respects, this study aims to consider the problems of the lifted villages using the existing researches on them and to make typology by characteristics-data of the villages and to establish improvement strategies of each types. In this study, the villages were classified into 5 types as a result of cluster analysis on 424 villages among all 1,800 through variables of locational potentiality : location, accessibility, size and form of village, condition of regulations etc. According to function of the villages, they were divided into 4 types: urban-type, rural-type, industrial-type and neighborhood-centered-type. This study also drew 4 improvement-strategy-types by combination of locational potentiality and village-function : type of improving life-environment, type of improving production-infra, type of inducing-planned-improvement and type of constructing center-of living-circle. Finally, this study suggested the directions of the each 4 types to desirable improvement and management which could be used to make and complement plans for village improvement.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.1-29
• /
• 2015

This paper aims at studying how to express and be used the characteristics of New age consciousness in the popular culture. New age consciousness is used interchangeably with new age movement. The philosophy of new age is based on humanism, which the infinite potential power of human can change the human himself and the earth forward to be shown the new age of peace, hope and love in an instant. This consciousness is based on the Western secret art and Eastern consciousness against the Christianity and has begun to develop in the alternative religion influenced by Postmodernism and Counterculture movement on 1970's which is against the corruption of American society on 1960's. However, new age consciousness has tried to change to a social movement for the culture, the peace, the happiness of mankind and the healing society rather than a religion idea because of the limitation of the theory itself. Nevertheless, the new age culture contains the characteristics of the religion, and the characteristics has been easily borrowed to the mess media and infiltrated to us. In a broad sense, the religion includes both own religion beliefs and behavior and the social movements and tendencies about the established religion which pursues the holy and the highest value. The religion is valued as a complex culture phenomenon, which the religion presents the right direction and the meaning of life as well as contributes to the maintenance of social order and the social unification. For this reason, the religion and the culture have a deep relationship between mess media and needs to be captured and listen to religious longing lurking deep within the human consciousness in order to give the audience impressed and fun. In the study, the characteristics of New age such as reincarnation, illusion, meditation, monism and pantheism is analyzed for what affects students studying mess media and the popular culture. And then the study is analyzed the characteristics of new age consciousness in the animation through 'Avatar'. This study shed new light on the influence of religion which is ideological identity of popular culture, and I expect to be a little help to have the insight to examine the mess media with a various angles.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2006

Iron manufacturing process involves production of various by-product including slag, sludge, sintering and EAF(Electric Arc furnace dust). Some of the by-products such as EAF and sintering dust are disposed of as waste due to their high heavy metal contents. It has been notice for many years that the EAF dust also contain about 65% of Fe(0) and Fe(II) and then the possible utilization of the iron. One possibility is to apply the EAF as a lining material in conjunction with clay or HDPE liners, in waste landfill. The probable reaction between the leachate containing toxic elements such as TCE, PCE dioxine and $Cr^{6+}$ is reduction of the toxic materials in corresponding to the oxidation of the reduced iron and therefore diminishing the toxicity of the leachate. It is, however, prerequisite to evaluate the leaching characteristics of the EAF dust before application. Amelioration of the leachate would be archived only when the level of toxic elements in the treated leachate is less than that of in the untreated leachate. Several leaching techniques were selected to cover different conditions and variable environments including time, pH and contact method. The testing methods include availability test, pH-stat test and continuous column test. Cr and Zn are potentially leachable elements among the trace metals. The pH of the EAF dust is highly alkaline, recording around 12 and Zn is unlikely to be leached under the condition. On the contrary Cr is more leachable under alkaline environment. However, the released Cr should be reduced to $Cr^{3+}$ and then removed as $Cr(OH)_3$. Removal of the Cr is observed in the column test and further study on the specific reaction of Cr and EAF dust is underway.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.125-132
• /
• 2017

The development project of Busan New Port aims to be Logistics Hub Port but there are too many things to deal with ; enlargement of harbour, interport competition, modernization of harbour loading equipment and so on. At present, 23 berths of North and South container quay are in operation and 22 berths will be constructed on west and south-side by 2020. Namely, Busan New Port will operate 45 berths in 2020. When it comes to port distripark, a large-scale of Port distripark project is underway, such as Ung-Dong district 1,2 phase, West container 1,2phase, North distripark and so on. This study is to deduce traffic system problem of Busan New Port which is caused by the development project through predicting traffic need considering the development project. According to study, there are three main problems of traffic system : 1. traffic congestion caused on main crossroad, connecting second harbour back road. 2. It has been predicted that South-North road and traffic capacity of New Port road would lack compared to traffic volume-to-be-increased. Moreover, the detour volume of traffic is caused because New Port's 1st avenue and route 2 were not connected directly. Thus, this study suggests three kinds of improvement plan for smoother traffic flow. 1st. Operate roundabout on major intersection, for example, second harbour back road, west container wharf's subway corridors(South to North), and permit only right turn on sub-intersection. 2nd. Extend New Port road(North container's port road) by utilizing side walk and median. 3rd. Install exit ramp which utilizes Route 2 connecting New Port's 1st avenue and local road 1042. The method we used to analyze the effect of improvement is Vissim of Mircro Simulation Package.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.3
• /
• pp.161-172
• /
• 2011

Open beaker digestion method is routinely used as the sample preparation technique for trace element determination of rock samples by inductively coupled plasma mass spectrometry, With this method, however, dissolution of Zr and Hf is not always guaranteed especially when the samples contain refractory minerals. In this study, glass bead digestion technique was compared with conventional open beaker digestion technique for the sample preparation of three USGS rock standards such as AGV-2, BHVO-2, and G-3. Thirty trace elements including rare earth elements were analysed by ICP-MS and ICP-AES. There were no clear differences in analytical results for the AGV-2 and BHVO-2 standards between the two techniques, but Zr, Hf, Y, and middle- to heavy- rare earth element concentrations of the G-3 standard prepared by open beaker digestion technique were significantly lower than the recommended values. This can be attributed to the presence of refractory mineral zircon. On the contrary, all the analytical results of the G-3 standard prepared by glass bead digestion technique were in good agreement with the recommended values, indicating complete dissolution of zircon. The analytical results show that the volatile elements such as Pb and Zn were not lost during the preparation of glass bead. Low dilution glass bead digestion technique described here will be very helpful to enhance precision and accuracy of trace element analysis for geological samples containing refractory minerals.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.313-324
• /
• 2009

We explore the effect of particle shape and size on 3-dimensional (3D) network and pore structure of porous earth materials composed of glass beads and silica gel using NMR micro-imaging in order to gain better insights into relationship between structure and the corresponding hydrologic and seismological properties. The 3D micro-imaging data for the model porous networks show that the specific surface area, porosity, and permeability range from 2.5 to $9.6\;mm^2/mm^3$, from 0.21 to 0.38, and from 11.6 to 892.3 D (Darcy), respectively, which are typical values for unconsolidated sands. The relationships among specific surface area, porosity, and permeability of the porous media are relatively well explained with the Kozeny equation. Cube counting fractal dimension analysis shows that fractal dimension increases from ~2.5－2.6 to 3.0 with increasing specific surface area from 2.5 to $9.6\;mm^2/mm^3$, with the data also suggesting the effect of porosity. Specific surface area, porosity, permeability, and cube counting fractal dimension for the natural mongolian sandstone are $0.33\;mm^2/mm^3$, 0.017, 30.9 mD, and 1.59, respectively. The current results highlight that NMR micro-imaging, together with detailed statistical analyses can be useful to characterize 3D pore structures of various porous earth materials and be potentially effective in accounting for transport properties and seismic wave velocity and attenuation of diverse porous media in earth crust and interiors.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.571-588
• /
• 2014

It consists of the Precambrian Jirisan metamorphic complex and Sancheong anorthosite complex and the Mesozoic granitoids which intrude them in the Sancheong area, the Jirisan province of Yeongnam massif, Korea. The study area is located in the western part of the stock-type Sancheong anorthosite complex. We performed a detailed fieldwork on the Sancheong anorthosite (SA) and Fe-Ti ore body (FTO) which constitute the Sancheong anorthosite complex, and reinterpreted the origin of FTO foliation and the genetic relationship between them from the foliations, shear zones, occurrences of the SA and FTO. The new structural characteristics between them are as follows: the multilayer structures of FTO, the derived veins of straight, anastomosing uneven types and block structures related to the size reduction of SA, the gradual or irregular boundaries of SA blocks and FTO showing bulbous lobate margins and comb structures, the FTO foliation and linear arrangements of flow occurrence which is not ductile shear deformation, the discontinuous shear zone of SA, the orientation of FTO foliations parallel to the boundaries of SA blocks, the predominance of FTO foliations toward the boundaries of SA blocks and being proportional to the aspect ratio of plagioclase xenocrysts and SA xenoblocks, and the flow folding structures of FTO foliation. Such field evidences indicate that the SA is not fully congealed when the FTO is melt and the fracturing of partly congealed SA causes the derived veins of FTO and the size reduction of SA. Also the gradual or irregular boundaries of SA blocks and FTO result from the mutual reaction between the not fully congealed SA blocks and the FTO melt, and the FTO foliation is a magmatic foliation which was formed by the interaction between the FTO melt and the partly congealed SA blocks. Therefore, these suggest that the SA and FTO are not formed from the intrusion of different magmas in genesis and age but from a coeval and cogenetic magma through multiple fractionation. We predict that the FTO will show an very irregular occurrence injected along irregular fractures, not the regular occurrence like as the intrusive vein and dike. It can be applied to the designing of Fe-Ti mineral resource exploration in this area.

• Korean Journal of Organic Agriculture
• /
• v.26 no.1
• /
• pp.99-128
• /
• 2018

The cultivation area of rice as staple grains is decreasing in the domestic situation in Korea. Import volume of a duty in foreign rice is 409,000 tons for a year regardless increasing of production per unit area and decreasing of rice consumption. The total stock of rice is increasing cumulatively despite the effort for production mediation of rice. Therefore, maintenance of cultivation area and reduction of production are necessary for national foodstuffs security problems. Development of environment-friendly and low-carbon technology as alternative of global warming and aging of farm labor power is very important responsibility for descendants with creation of sustainable agriculture environment. As alternative for demand and supply stabilization of rice from all angles, first stage: extension of environment-friendly cultivation area as 17% Jeollanam-do level with maintenance of cultivation area under the present circumstances, second stage: extension of environment-friendly cultivation area as 25%, third stage: extension of environment-friendly cultivation area as 35%. From above mentioned scenario, reduction of rice production (60,000 tons), increases of production cost (59,200,000,000 Won), and reduction of income (201,500,000,000 Won) are estimated in first stage. Reduction of rice production (90,000 tons), increases of production cost (122,100,000,000 Won), and reduction of income (313,700,000,000 Won) are estimated in second stage. Reduction of rice production (380,000 tons), increases of production cost (222,000,000,000 Won), and reduction of income (464,500,000,000 Won) are estimated in third stage. From analysis results for partial tillage in transplanting cultivation complex (10ha), rice production is decreased 1.3~1.5 ton by complex. Production cost of rice is decreased and increases of income cultivation type. Gradual extension of environment-friendly agriculture and low-carbon partial tillage could be expected for environment maintenance of the territorial integrity, confidence of consumer, and high-efficiency of low-cost.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.4
• /
• pp.267-285
• /
• 2002

Dok Island, a Pliocene volcano, lies in the southwestern part of the East Sea. Most the work to date have focused primarily on the petrolography of the island, and as a result, the morphological characteristics and internal structure of the volcanic edifices of the Dok Island remain poorly understood. To provide better constraints on these features, bathymetric data with multibeam echo sounder, 32-channel seismic and 3D gravity modeling were used in this study. Three positive topographic highs are present in the study area, and these highs satisfy the seamount criteria. They are named as Dokdo, Tamhae, and Donghae seamounts. 32-channel seismic survey was conducted to investigate the sediment thickness of the area, which shows that there are no sediments near the summit of seamounts. Away from the seamounts, however, sediment becomes thick(>2000 m) toward the western part of the study area, and sediments in the northern and southern parts are about 1000 m thick. Free-Air gravity anomalies in this study generally follow the bathymetric feature with less than -20 mGal at the western part, but increase towards the seamounts. In the summit of the Dokdo Seamount, anomalies reach over 120 mGal, and in Tamhae and Donghae seamounts, the peak anomaly shows 90 and 70 mGals, respectively. All seamounts have an isolated volcanic conduit in their centre and show regional compensation root with 0.5～1.5 km thickness. The flat-topped summit of the seamounts is probably caused by wave truncation, indicating the sea level at the time of formation of the flat-topped geometry. Comparison between the present-day sea level and subsidence level during the opening of the East Sea suggests that the seamounts in the study area have subsided by 200～300 m after the formation. Furthermore, it implies that the seamounts formed over 12～10 Ma.