• Geophysics and Geophysical Exploration
• /
• v.23 no.3
• /
• pp.131-140
• /
• 2020

In training a classification model using machine learning, the acquisition of training data is a very important stage, because the amount and quality of the training data greatly influence the model performance. However, when the cost of obtaining data is so high that it is difficult to build ideal training data, the number of samples for each class may be acquired very differently, and a serious data-imbalance problem can occur. If such a problem occurs in the training data, all classes are not trained equally, and classes containing relatively few data will have significantly lower recall values. Additionally, the reliability of evaluation indices such as accuracy and precision will be reduced. Therefore, this study sought to overcome the problem of data imbalance in two stages. First, we introduced weighted accuracy and weighted precision as new evaluation indices that can take into account a data-imbalance ratio by modifying conventional measures of accuracy and precision. Next, oversampling was performed to balance weighted precision and recall among classes. We verified the algorithm by applying it to the problem of facies classification. As a result, the imbalance between majority and minority classes was greatly mitigated, and the boundaries between classes could be more clearly identified.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.157-164
• /
• 2005

Urban conditions such as underground facilities and ambient noises due to cultural activity restrict the application of conventional geophysical techniques in general. We used the refraction microtremor (REMI) technique as an alternative way to get the geotechnical information, in particular shear-wave (S-wave) velocity information, at a site along an existing rail road. The REMI method uses ambient noises recorded using standard refraction equipment to derived shear-wave velocity information at a site. It does a wavefield transformation on the recorded wavefield to produce Rayleigh wave dispersion curve, which are then picked and modeled to get the shear-wave velocity structure. At this site the vibrations from the running trains provided strong noise sources that allowed REMI to be very effective. REMI was performed along the planned new underground rail tunnel. In addition, Suspension PS logging (SPS) were carried out at selected boreholes along the profile in order to draw out the quantitative relation between the shear wave velocity from the PS logging and the rock mass rating (RMR) determined from the inspection of the cores recovered from the same boreholes, These correlations were then used to relate the shear-wave velocity derived from REMI to RMR along the entire profile. The correlation between shear wave velocity and RMR was very good and so it was possible to estimate the RMR of the total zone of interest for the design of underground tunnel,

• Geophysics and Geophysical Exploration
• /
• v.8 no.2
• /
• pp.156-162
• /
• 2005

Particularly in research related to seawater intrusion the change of fluid electrical conductivity is one of major concerns, and effective monitoring can help to optimize a water pumping performance in coastal areas. Special considerations should be given to the mounting of sensors at proper depth during the monitoring design since the vertical distribution of fluid electrical conductivity is sensitive to the characteristics of seawater intrusion zone. This tells us the multi-channel electrical conductivity monitoring is of paramount consequence. It, however, is a rare event when this approach becomes routinely available in that commonly used commercial stand-alone type sensors are very expensive and inadequate for a long term monitoring of electrical conductivity or water level due to their restricted storage and difficulty of real-time control. For this reason, we have developed a real-time monitoring system that could meet these requirements. This system is user friendly, cost-effective, and easy to control measurement parameters - sampling interval, acquisition range, and others. And this devised system has been utilized for the electrical conductivity monitoring in boreholes, Yeonggwang-gun, Korea. Monitoring has been consecutively executed for 24 hours, and the responses of electrical conductivity at some channels have been regularly increased or decreased while pumping up water. It, with well logging data implemented before/after pumping water, verifies that electrical conductivity changes in the specified depths originate from fluid movements through sand layer or permeable fractured rock. Eventually, the multi-channel electrical conductivity monitoring system makes an effective key to secure groundwater resources in coastal areas.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.5
• /
• pp.503-516
• /
• 2012

Rock mass rating (RMR) is the key factor when designing the appropriate support pattern of tunnel projects. Borehole drilling is usually performed along the tunnel route in order to determine the rock mass rating to be used for tunnel design. The rock mass rating at the non-boring region between boreholes is usually assessed through geophysical surveys such as electrical prospecting, seismic prospecting, etc. Many studies were carried out to find out the correlation between electrical resistivity and rock mass rating. However, most researches were aimed at obtaining the relationship between the two parameters utilizing experimental results obtained from laboratory tests or electrical prospectings. In this paper, efforts were made to analyze and obtain relationships between the electrical resistivity obtained from in-situ electrical resistivity logging data and the rock mass rating. Correlation studies using field data showed that the electrical resistivity is highly correlated with the rock mass rating with the determination coefficient more than 90%. The correlation analysis was also carried out between RMR classification parameters and the electrical resistivity. It was shown that the correlation between the condition of discontinuities and the electrical resistivity was very high with the determination coefficient more than 80%; that between the groundwater condition and the electrical resistivity was very low with the determination coefficient less than 57%.

• Economic and Environmental Geology
• /
• v.9 no.3
• /
• pp.135-141
• /
• 1976

The gamma-gamma logging method appplying in geophysical research are presented in this paper_ The logging probe assembly was designed which permits changing the source-to-detector spacing while conditions of proceeding ${\gamma}-{\gamma}$ logging, which a collimated gamma ray source ($^{60}Co$, 0.5mCi and/or 2 mCi) is separated from the scintillation detector as shown in Fig. 2 and 3, size is 6.0 cm in diameter and 120.0 cm in long and the exposed parts are made of stainless steel pipe. The results is confirmed by the experiment performed mainly in granite rock where a slightly constant shape was obtained but sometimes was shown sharpness shape for the measured scattered gamma-ray intensity. Consequently, the experimental results are obtained an adequate intensity of scattered gamma-rays and favourable response to density change, and also very closely correspond to between core samples of the test boring and to used this method of ${\gamma}-{\gamma}$ logging in the test bore-hole of the strata.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.108-112
• /
• 2004

균열 암반 대수층에 대한 지하수 인공 함양 주입 가능성을 예비적으로 평가하기 위한 시험을 수행하였다. 지하수 인공 함양 주입 시험이 수행된 지역은 경기도 포천군 이동면이며, 이 지역의 지질은 중립내지 조립질 화강암에 해당된다. 시험 정호에 대한 시추공 내부 촬영 결과, 화강암 내에 부분적으로 절리들이 발달되어 있었으며, 대체로 수직적인 절리 발달이 우세하였다. 2개소에서 인공 함양 주입 시험이 100kgf/$\textrm{cm}^2$ 이상의 확장 팩커로 대상공의 상부를 밀폐한 후 시행되었다. 이중 MW-7호 공에서는, 주입 압력을 5 내지 7kg/$\textrm{cm}^2$으로 조절하여 시간당 약 450$\ell$의 평균 주입률로 시험을 수행하였으며, O-7a 호 공에서는 주입 압력을 4kgf/$\textrm{cm}^2$ 내외, 시간당 약 1,740$\ell$의 평균 주입률로 시험을 수행하였다. MW-7호 공의 시험은 3일간 3회에 걸쳐 각 450분, 200분, 414분 동안 시험이 수행되었으며, O-7a호 공에서는 연속적으로 24시간 동안 인공 함양 주입 시험이 수행되었다. 수행된 지하수 인공 함양 주입시험은 적어도 지하수 상류 구배 구간의 지하 수두를 시험이 수행된 이후에도 24시간 이상 유지하는 것으로 평가되었다. 실험을 통해 주입한 양과 주변 관측공의 수위 상승을 단순 검토한 결과 시험이 수행된 지역의 개략적 유효 공극률을 산정 할 수 있었으며, 그 결과, 이 지역 균열 암반의 유효 공극률은 약 3 내지 6% 인 것으로 평가되었다 국내에서 지하수 인공 함양 방식을 균열 암반 대수층에 활용하여, 지속적인 수자원 관리와 수도 공급을 할 수 있는지를 평가하기 위해서는 앞으로 보다 많은 시험수행과 연구를 통한 검증이 요구된다. 까마중, 냉이, 명아주, 둑새풀 등의 생장에 현저한 조해현상을 나타냈다. 이것으로 보아 억새가 타식물의 생장에 영향을 주는 요인물질은 억새의 뿌리에서 분필되는 것으로 생각된다. 옥수수의 뿌리에서 직접 분필하는 물질이나 옥수수뿌리의 분해물질들은 모두 당귀의 생장을 조해하는 경향이 있었다.기존에 제안된 경험식들에 의한 계산결과 보다 균질화 해석법의 결과가 훨씬 정확함을 주목하여야 한다.c의 범위로서 최대값과 최소값은 4차수(four order)의 차이를 보였다. 단열대의 분포 특성을 파악하기 위하여 지구물리검층을 실시하였고, 각 시험에 의해 획득된 결과들과의 비교를 통하여 유동성이 높은 단열들이 규명되었다. 온도검층은 유동성 단열과 일반적인 단열들을 구별하는 좋은 지시자로 나타났다. 그 결과, N70-80$^{\circ}$W.60-85$^{\circ}$NE/SW, N75-80$^{\circ}$W.25-30$^{\circ}$SW, N50-64$^{\circ}$W.60-85$^{\circ}$NE, N35-45$^{\circ}$E.65-75$^{\circ}$SE, 그리고 N65-72$^{\circ}$E.80$^{\circ}$SE/60$^{\circ}$NW의 단열들이 연구지역의 지하수 흐름을 지배하는 뚜렷한 유동성 단열로 규명되었다.eatments. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that of c

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.112-131
• /
• 2000

In spite of its many strong points, pole-pole electrode configuration is not often used for ground electrical resistivity survey except for bore hole survey as normal logging and for archaeological investigation. Above all, poor spatial resolution of pole-pole survey may be responsible for this. But recent experiences so far gained by the present authers lead them to think that pole-pole survey can be at least a viable means of reconnaissance survey in near-surface conductive environment and an effective interpretational scheme may augment its resolution. As well known, a response of any other electrode configuration is a linear combination of pole-pole responses. Based on this principle of linear superposition and the principle of reciprocity, the other 'responses' can be derived with simple additions and subtractions of pole-pole responses. Though such responses are not always correct due to the adverse effects of noises, combined with the potential decay curves, they can be helpful to interprete better pole-pole survey data especially in connection of the resolution. This can be comparable to the use of the first or second derivatives of gravity and magnetic intensity surveys.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.107-112
• /
• 2008

In the case of the deep reservoirs like the gas reservoirs in the East-sea, it is often difficult to observe AVO responses in CMP gathers. Because the reservoir becomes more consolidated as its depth deepens, P-wave velocity does not decrease significantly when the pore fluid is replaced by the gas. In this study, we analyzed the effects of Poisson's ratio difference on AVO response with a variety of Poisson's ratios for the upper and lower layers. The results show that, as the difference in Poisson's ratio between the upper and lower layers decreases, the change in the reflection amplitude with incidence angle decreases. To consider the limitation of AVO responses shown in the gas reservoir in East-sea, the velocity model was made by simulation Gorae V structure with seismic data and well logs. The results of comparing AVO responses observed from the synthetic data with theoretical AVO responses calculated by using material properties show that the amount of the change in reflection amplitude with increasing incident angle is very small when the difference in Poisson's ratio between the upper and lower layers is small. In addition, the characteristics of AVO responses were concealed by noise or amplitude distortion arisen during preprocessing. To overcome such limitations of AVO analysis of the data from deep reservoirs, we need to acquire precisely reflection amplitudes in data acquisition stage and use processing tools which preserve reflection amplitude in data processing stage.

• Geophysics and Geophysical Exploration
• /
• v.22 no.4
• /
• pp.225-238
• /
• 2019

Migration velocity analysis (MVA) for creating optimum depth-domain velocities in seismic imaging was applied to marine long-offset multi-channel data, and the effectiveness of the MVA approach was demonstrated by the combinations of conventional data processing procedures. The time-domain images generated by conventional time-processing scheme has been considered to be sufficient so far for the seismic stratigraphic interpretation. However, when the purpose of the seismic imaging moves to the hydrocarbon exploration, especially in the geologic modeling of the oil and gas play or lead area, drilling prognosis, in-place hydrocarbon volume estimation, the seismic images should be converted into depth domain or depth processing should be applied in the processing phase. CMP-based velocity analysis, which is mainly based on several approximations in the data domain, inherently contains errors and thus has high uncertainties. On the other hand, the MVA provides efficient and somewhat real-scale (in depth) images even if there are no logging data available. In this study, marine long-offset multi-channel seismic data were optimally processed in time domain to establish the most qualified dataset for the usage of the iterative MVA. Then, the depth-domain velocity profile was updated several times and the final velocity-in-depth was used for generating depth images (CRP gather and stack) and compared with the images obtained from the velocity-in-time. From the results, we were able to confirm the depth-domain results are more reasonable than the time-domain results. The spurious local minima, which can be occurred during the implementation of full waveform inversion, can be reduced when the result of MVA is used as an initial velocity model.

• Geophysics and Geophysical Exploration
• /
• v.12 no.3
• /
• pp.255-262
• /
• 2009

Conventionally, vertical-seismic-profiling (VSP) survey that provides high-resolution information has mainly performed to obtain the exact depth of the gas hydrate-bearing sediment, which is one of the key factors in the development of the gas hydrate. In this study, we extracted interval velocities and created corridor stacks from the first domestic zero-offset VSP data, which were acquired with three component receivers at UBGH09 borehole in Ulleung Basin where gas hydrate exists. Then we compared the corridor stacks with a CMP stacked section from surface seismic data. First of all, we converted the signals recorded with three component receivers to true vertical and horizontal components by phase rotation, and divided the data into direct waves and reflected waves by wavefield separation processing. The trend of the interval velocity extracted from the zero-offset VSP was similar to that of the sonic log obtained at the same borehole. Because the interval velocity of the gas hydrate-bearing sediment above the BSR was high, and it decreased suddenly through the BSR, we could infer that free gas is accumulated below the BSR. The results of comparing the corridor stacks to the CMP stacked section of the surface seismic data showed that most reflection events agreed well with those in the surface CMP stacked section and that the phase-rotated VSP data corresponded better with the surface seismic data than the VSP data without phase rotation. In addition, by comparing a corridor stack produced from the transverse component with the CMP stacked section of the surface seismic data, we could identify PS mode-converted reflections in the CMP stacked section.