• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.370-370
• /
• 2011

I-III-IV2족의 Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 3단계(three-stage) 동시증발공정을 통하여 약 19.9%의 최고의 효율을 보유하고 있다. 3단계 공정에 있어 IV2족 Se의 증발 속도 또는 증착압력은 우선 배향성 제어 및 표면 미세구조 영향 등에 큰 영향을 미치는 것으로 알려져 있다. 본 연구에서는 CIGS 박막 합성을 위한 3단계 공정에서 각 단계별 Se 분압의 변화를 주어, 각 공정 단계에서 Se 분압의 변화가 CIGS 박막의 미세구조 및 셀 효율에 미치는 영향을 분석하였다. 3단계 공정에서 Cu, In, Ga 분압은 고정시키고, Se 분압의 크기 순서대로 1, 2, 3으로 변화시켜 CIGS 박막을 제조하였다. 이 박막의 미세구조, 특히, 우선 배향성, 표면의 기공, 결정성을 제어 하기 위하여 3단계 공정에서 1st stage 이후 Se 분압을 증가시키는 방법($3{\rightarrow}1$, $2{\rightarrow}1$)과 1st stage 이 후 Se 분압을 감소시키는 방법($1{\rightarrow}3$, $1{\rightarrow}2$)을 적용하여 비교하였다. 그 결과 3단계에서 1st stage 이후 Se 분압을 증가시킴으로써 (220)/(204)의 우선 배향성을 촉진시키며, 결정성을 개선하였고, 1st stage 이후 Se 분압을 감소시킴으로써 CIGS 박막 표면의 기공을 제거하고, 결정성을 향상시켰다. 이렇게 1st stage이 후 Se 분압을 증가시킴으로써 (220)/(204)의 우선 배향성의 촉진과 결정성 개선은 단락 전류(Jsc)를 증가시켰으며, 1st stage 이후 Se 분압을 감소시킴으로써 CIGS 박막 표면의 기공을 제거와 결정성 개선은 개방전압(Voc)의 증가효과를 가져왔다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2376-2384
• /
• 1992

A theoretical analysis is carried out to predict the characteristics of transient ignition phenomena for the spherical fuel droplets cloud with non-uniform droplet size and number density distribution. Numerical calculations are performed for various cases depending on the combinations of the major parameters such as ambient temperature and initial distributions of droplet size and number density. The results of present study show that the ignition delay decreases for higher ambient temperature and smaller droplet size. Droplets cloud of hollow type with outer concentrated distribution ignites most rapidly.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.3
• /
• pp.175-181
• /
• 1994

This paper deals with the correlation of absorption rate in absorber and evaporation rate in evaporator. The evaporator consists of a copper tube of 10mm dia, and 600mm long and chilled water flowing through the tube is fed by the chilled water circulator. The flowrate of LiBr-water solution in the absorber plays a significant role in determining the magnitude of the heat transfer rate from chilled water to refrigerant There exists a flowrate of solution which has a maximum value of heat transfer. It is interesting to note that the absorption rate of absorber increases with increasing the heat transfer rate of the evaporator. Also, absorption rate increases with evaportation rate, and the ratio(the former/the other) depends on the inlet temperature of LiBr-water solution in the absorber. The heating capacity in the absorber is higher than the refrigerating capacity in the evaporator.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1087-1095
• /
• 1996

Pervaporation experiments of ternary ethanol/isopropanol/water mixtures were performed using poly(dimethyl siloxane)(PDMS) membrane at $45^{\circ}C$ and the mutual effects of ethanol and isopropanol on the permeation characteristics were studied. Compared to the case of the binary aqueous ethanol or isopropanol solutions, the existence of ethanol or isopropanol in the ternary mixtures resulted in the depression of each other's permeation rate. The depression effect of ethanol on the isopropanol permeation was more considerable than the depression effect of isopropanol on the ethanol permeation. These decreases in the permeation rate were thought to be due to the larger interactions between permeants than the plasticizing effects of ethanol or isopropanol on the polymer membrane. The strong interactions between permeants reduced the driving forces for both ethanol and isopropanol permeation in the ternary mixtures.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.5
• /
• pp.466-472
• /
• 2018

The investigation of cryogenic liquid pool spreading is an essential procedure to assess the hazard of cryogenic liquid usage. In this experimental study, to measure the evaporation velocity when the pool is spreading, liquid nitrogen was continuously released onto unconfined concrete ground. Almost all of the reported results are based on a non-spreading pool in which cryogenic liquid is instantaneously poured onto bounded ground for a very short period of time. A simultaneous measurement of the pool location using thermocouples and of the pool mass using a digital balance was carried out to measure the evaporation velocity and the pool radius. A greater release flow rate was found to result in a greater average evaporation velocity, and the evaporation velocity decreased with the spreading time and the pool radius.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.223-229
• /
• 2002

패드엔팬을 이용하여 물 공급량, 팬 회전속도의 변화에 따른 온실 냉방효과 시험한 결과를 요약하면 다음과 같다. 가. 패드에 흐르는 물 공급량별로 일중 11:00-16:00경에 물 공급량이 분당 60$\ell$이상 공급하면 8.0~9.5$^{\circ}C$의 온도차를 낼 수 있으며, 팬을 1170rpm으로 회전시킬 경우 6.0~9.$0^{\circ}C$의 온도차를 낼 수 있었다. 나. 온실과 팬출구 공기의 온도차는 일중 14:30~16:00 경에 60$\ell$이상의 물을 패드에 공급하는 경우 6.0~7.8$^{\circ}C$ 온도 강하 효과가 있고 팬을 1170rpm으로 회전시킬 경우에는 외기온 28$^{\circ}C$일 때 3$0^{\circ}C$이하로 온도를 강하시킬 수 있었다. 다. 패드에 흘리는 물의량을 60 $\ell$/min 이상을 공급하여 주면 30분당 20~28$\ell$의 물을 증발시킬 수 있다. 배출팬 회전속도가 1170rpm일 경우에 30분당 20~30$\ell$의 물을 증발시키는 것으로 나타났다. 라. 본시험에 사용된 패드엔팬의 흡.배기의 엔탈피변화는 8:30이전에는 흡기가 배기보다 온도가 낮아 엔탈피가 양(+)의 값을 나타났고, 8:30 이후에는 흡기가 배기 보다 온도가 높아 -2.0~-4.OkJ/kg의 엔탈피 차만큼 냉각효과가 있었으며, 냉방효율을 65~80% 수준으로 나타났다. 마. 본시험결과로 패드엔팬의 냉기 공급방식만 개선된다면 이동식인 박스형 패드엔팬도 냉방장치로 사용 가능할 것으로 판단된다.

• Korean Journal of Environment and Ecology
• /
• v.25 no.1
• /
• pp.91-101
• /
• 2011

The purpose of this study is to demonstrate the positive effects of artificial ground greening on the reduction of carbon dioxide ($CO_2$) which can help improve ecological functions in cities and mitigation of climate change, through quantifying $CO_2$ uptake and evapotranspiration by the process of photosynthesis of some plants. Experiment of $CO_2$ uptake and evapotranspiration was conducted by measurement of $CO_2$ exchange rate using the infrared gas analyzer, for 7 month, growing season from May to November 2009, 2 times a month. The result was as follows; The $CO_2$ uptake quantity per $cm^2$ of Chrysanthemum zawadskii was the highest rate at $21.47{\times}10^{-6}g/cm^2/s$ and Poa pratensis was $16.20g{\times}10^{-6}g/cm^2/s$. The stronger was light of intensity, the higher were $CO_2$ uptake rate of most plants. In quantity of evapotranspiration, Poa pratensis was the highest rate at $8.75{\times}10^{-5}g/cm^2/s$ and Aquilegia buergariana was $8.66{\times}10^{-5}g/cm^2/s$. From this study, it is confirmed that artificial ground greening has capacity of absorption $CO_2$ and effects on improving urban microclimate.

• Journal of Energy Engineering
• /
• v.18 no.4
• /
• pp.213-220
• /
• 2009

The experimental characteristics for fry drying method was investigated using low-rank coal with a high moisture content. Final temperature, mixing ratio between coal and kerosene, content of coal or kerosene, total weight of the mixture and mixing methods were varied to find out the optimum conditions by measuring moisture of coal. Evaporation of the coal moisture was not completed below $120^{\circ}C$ of final temperature. The amount of moisture was not significantly different over $130^{\circ}C$. Coal moisture was easily evaporated by increasing coal content, which showed that the moisture evaporation could be significantly enhanced by the remove of evaporated moisture from kerosene rather than by heat transfer to the coal. High total weight of the mixture resulted in lowering moisture content of coal with long evaporation time. On the other hand, low total weight was difficult to reduce the moisture below a certain level, but could reduce evaporation time. Thus, it can concluded that kerosene content should be lowered to the extent maintaining the mobility of the mixture in order to enhance evaporation. It was also observed that evacuation and mixing by using nitrogen could improve drying of coal.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.22 no.4
• /
• pp.63-74
• /
• 1995

본 연구의 목적은 주택의 냉방 및 난방에너지 절약을 위한 적절한 식재계획의 지침을 제시하기 위함이었다. 본 연구의 대상지는 미국 중동부 내륙의 한 도시인 쉬카고(Chicago)의 북서쪽에 위치한 주거지였다. 쉬카고 는 온대 기후대에 속하는 도시로서, 본 연구는 한국 중부지역의 주택들에 있어서 식재를 통해 냉방 및 난방에너지를 절약하고, 또한 그 에너지 절약 으로부터 대기오염물의 배출을 저감하는데 유용한 정보를 제공할 것이라고 사료된다. 본 연구는 주택의 에너지 절약에 기여하는 주택주변 현존 식생 의 차양(Shading), 증발산 및 방풍의 효과를 모델링하였다. 식재로부터 절 약된 에너지의 총비용은 식생피도가 58.9%인 주거블럭에서 1993년 한해동 안 한 가구당 46.3달러였다. 그 중, 증발산효과가 53.7%, 방풍효과가 26.1%, 차양효과가 20.2%를 각각 차지하였다. 한편, 피도가 36.3%인 주거블럭에서 의 연간 총 에너지 절약은 가구당 8.6달러였다. 식생피도가 높은 주거지에 서 식재에 의한 에너지 절약의 효과는 더욱 증대되었다. 그러나, 대부분의 현존 수목은 부적지에 위치되어 겨출철에 주택내로의 광선의 입자를 차단 함으로써 난방에너지의 요구를 증가시켰다(수목 한 개체당 최대 6달러). 차 양효과를 최대화하기 위해서는 주택건물의 남쪽가까이에서는 교목의 식재 를 가급적 회피하고, 수관이 가능한 한 넓은 교목을 주택건물의 서쪽과 동 쪽가까이에 식재하여야만 한다. 증발산과 방풍의 효과를 증진하기 위해 건 물의 북쪽, 북동쪽 및 북서쪽에서의 고밀도 식재가 요구된다.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.399-405
• /
• 2020

Recently, it is difficult to produce uniform scions and rootstocks with high quality in a greenhouse due to weather extremes. The closed transplant production system is useful for producing scions and rootstocks with desirable morphological characteristics by environment control regardless of weather outside. In this study, we investigated transpiration rates and growth of cucumber and tomato scions and rootstocks grown under different light intensity conditions for precise irrigation control in a closed transplant production system. Hanging system to measure continuously the weight of plug tray consisting of seedlings and substrate with load-cell was installed in each growing bed. Using this system, we confirmed initial wilting point of cucumber and tomato seedlings, and conducted subirrigation when moisture content of substrate was not below 50%. The irrigation time of cucumber scions and rootstocks were 7 and 6 days after sowing, respectively. In tomato scions and rootstocks grown under PPF (photosynthetic photon flux) 300 μmol·m^-2·s^-1, the irrigation time were 5, 8, 11, and 13 days after sowing. Increasing light intensity increased transpiration rates and differences of transpiration rates by light intensity was higher in tomato seedlings. The growth of cucumber and tomato seedlings was promoted by increasing light intensity, especially, hypocotyl elongation and stem thickening was affected by light intensity. Cumulative transpiration rate of plug tray in cucumber and tomato seedlings was increased by increasing light intensity, and daily transpiration rate per seedling was regressed by 1st-order linear equation with high correlation coefficient. Estimation of transpiration rates by weighing continuously plug tray of vegetable seedlings can be useful to control more accurately irrigation schedule in a closed transplant production system.