• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.260-267
• /
• 2003

우리나라의 물의 공급을 위한 수도역사가 1백년을 넘어서고 있는데 반해 전체 물 생산량은 60％에서 70％ 초반에 머물고 있는 실정이다. 99년 기준 1일 평균생산 f한 물 432만 7천톤에서 요금 부과한 물의 양은 295만 1천톤으로 137만 6천톤이 증발한 것이다. 이를 금액으로 환산하면 천문학적인 것으로 다른 표현으로 유수율이 현저히 낮은 것이다. 이렇게 유수율이 현저히 떨어지는 요인에는 시설물 관리의 어려움과 자원 및 세수관리의 어려움으로 나누어 볼 수 있는데, 본 연구에서는 상기의 문제점들을 해소하기 위한 방안의 하나로 무선통신 기술을 이용한 효율적인 시설물 관리 및 검침 방안을 제시함으로써 유수율 제고 및 누수율 감소를 위한 대책을 제시함으로서 무선검침시스템의 안정성과 계측의 정확성 및 신뢰성에 대한 검증을 위해 충북 청주시 상당구 우암동 일부 지역을 선정하여 1시간 마다 자동 검침을 통해 효율적 검침 가능 여부와 설치 대비 경제성 등을 알아보기 위해서 실시하였다.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.90-96
• /
• 2000

The optimum cooking conditions for large scale continuous gas cooker were studied with three varieties of rice. Optimum soaking time for the cooker was estimated to be 30 min at cooking temperature above $20{\circ}C$, while 60 min at cooking temperature below $10{\circ}C$. The ratio of water-to-milled rice giving the best eating quality was founded to be $1.41{\sim}1.48$, and corresponding moisture content of cooked rice ranged from 60 to 62% for different rice varieties. The optimum ratio of water to milled rice. (Chucheong) decreased from 1.50 to 1.37 with increase in the amount of milled rice from 4.0 to 6.5 kg in a cooking vessel. However, actual water uptake by rice (g water absorbed per g rice) on cooking was nearly constant value of 1.13, which means that evaporated water during cooking increases with decreasing the amount of rice in a cooking vessel.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.8
• /
• pp.1064-1072
• /
• 1998

The evaporation of sludge particles in a sludge dryer has been numerically investigated with commercial CFX4.1 code. Gas flow field, gas temperature field, sludge particle trajectories, and the moisture content variation of sludge particles are calculated fort various influencing factors, i. e., gas swirl velocity, initial particle distribution, gas temperature. Evaporation of sludge particles increases with gas swirl velocity, several supplying positions, and gas temperature, respectively due to increased residence time, increased contacting surface area, and increased temperature difference between gas and particle.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.4
• /
• pp.1-10
• /
• 1993

This paper introduces the outline of hull structure to the sorts of LNG carrier briefly. Especially, explains in detail for the insulation system of Moss Rosenberg Verft spherical tank type LNG carrier. It is not easy task to calculate exactly the temperature distribution of hull because of very complicated structure of hull. Therefore, in this paper by the adequate modeling of the Moss Rosengerg spherical tank type LNG carrier, a program is developed which calculate the temperature distribution of every hull and estimate the heat influx from every hull and output the BOR according to the variation of atmospheric conditions on boyage.

• Journal of Korea Water Resources Association
• /
• v.52 no.11
• /
• pp.941-946
• /
• 2019

A wildfire could significantly alter the local hydrological regime, depending on the area and severity, and thus it is critical to understand its effect and feedback using data and simulation. For the wildfire in Gangwon-do on April 4-5, 2019, South Korea, we retrieved the Normalized-Burned Ratio (NBR) index using remote-sensing data (500-m 8-day MODIS surface reflectance data), and detect the damaged-area based on the difference in the NBR (dNBR) before and after the fire. The damaged area was $29.50km^2$ in total, taking up 1.00-6.19% of five catchments. We then used remote-sensing data (500-m 8-day MODIS evapotranspiration data) and estimated that annual evapotranspiration (AET) would decrease as 0.05-1.56% over the five catchments, as compared to the pre-fire AET (2004-2018). This study highlights the importance of improving our understanding about the impact of wildfire on the local hydrological cycle.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.202-202
• /
• 2023

전 세계적으로 지구 온난화로 인해 발생한 가뭄은 사회적, 경제적, 환경적으로 막대한 피해를 야기하고 있다. 국내의 경우, 2022년부터 현재까지 지속되고 있는 가뭄 상황은 강수의 지역적 편차로 인해 남부 지역 중심으로 극심한 피해가 발생하였다. 남부 지역의 주요 용수공급원인 영산강, 섬진강권역의 용수 공급율은 예년의 57%(3.8억 톤)에 불과하며, 일부 도서·산간 지역은 용수공급이 제한되는 현상까지 발생하였다. 이러한 가뭄 피해를 대비하기 위해 초기에 모니터링을 통한 선제적 대응 방안을 구축해야 한다. 가뭄 모니터링의 경우 미계측 지역에 대한 모니터링 방법으로 주기적이고 균질한 자료를 제공 받을 수 있는 위성영상을 활용한 연구가 수행되고 있다. 가뭄을 정량적으로 분석하고 판단하기 위해 가뭄지수를 활용하고 있으며, 대표적인 가뭄지수는 지상 관측강수량자료를 활용한 확률분포 기반의 표준강수지수 (Standardized Precipitation Index, SPI)와 강수 및 기온의 변동성이 포함된 표준강수증발산지수 (Standardized Precipitation Evapotranspiration Index, SPEI)가 있으며, 위성영상 자료를 활용한 가뭄지수인 증발스트레스지수(Evaporative Stress Index, ESI) 등이 있다. 본 연구에서는 강수와 기온을 고려한 가뭄지수인SPEI와 위성영상 기반의 가뭄지수인 ESI를 활용하여 2022년 남부 지역의 가뭄 사상을 중심으로 지표별 시공간적 변화를 분석하고자 한다. SPEI의 경우 기상관측소 지점자료의 기온과 강수량을 활용하였으며, Terra 위성의 MODIS (Moderate Resolution Imaging Spectroradiometer) 센서에서 제공되는 위성영상자료를 활용한 ESI는 미계측 지역에 대한 가뭄 판단을 위해 시·군별로 세분화하여 산정하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.293-293
• /
• 2023

2022년 발간된 IPCC (The Intergovernmental Panel on Climate Change) 6차 평가보고서(AR6)에서는 미래 사회경제변화를 기준으로 기후변화에 대한 미래의 완화와 적응 노력에 따라 5개의 시나리오로 구분된 SSP (Shared Socioeconomic Pathways, 공통사회경제경로)를 제시하고 있다. 본 연구에서는 제주도 지역을 대상으로 SSP 시나리오에 따른 미래 수문학적 변화를 분석하였다. 제주도 지역의 독특한 기후 및 지질학적 특성, 간헐적 하천유출 특성 등을 모의할 수 있는 유역모델링(SWAT)을 기반으로, 미래 기후변화 시나리오에 따른 수문 변화를 분석하였다. 기후모형에 따른 미래 전망의 불확실성을 최소화하기 위해 SSP 시나리오 4종(SSP1-2.6, SSP2-4.5, SSP3-7.0, SSP5-8.5)에 대해 18개의 Global Climate Models (GCMs) 자료를 분석에 사용하였다. 또한 지역별 공간적 특성을 충분히 반영하기 위해 하천구간과 고도 특성을 고려하여 총 299개 소유역으로 구분하여 모델링을 수행하였다. 각 GCM 및 SSP 시나리오별 산출된 유역모델링 모의자료를 기반으로 과거 historical 기간(1981~2010년)과 미래기간(2011~2100년)으로 구분하여 강수량, 유출량, 증발산량, 함양량 등에 대한 시공간적 변화를 분석하였다. 대체로 모든 GCM 및 모든 SSP 시나리오에서 미래기간으로 갈수록 강수량은 증가하는 것으로 나타났다. 북부지역(제주시)보다는 남부지역(서귀포시)의 증가량이 많으며, SSP5-8.5 시나리오에서 상대적으로 변동폭이 큰 것으로 분석되었다. 기준증발산량 또한 기온의 증가에 따라 미래로 갈수록 기준증발산량이 증가하는 것으로 전망되었으며, SSP5-8.5 시나리오에서 가장 크게 증가하는 것으로 나타났다. 기준증발산량의 절대값은 북부지역에서 더 크게 나타나며, SSP5-8.5에서 가장 큰 것으로 전망되었다. 과거기간 대비 변화율은 SSP5-8.5에서 가장 크게 증가하며, 최소 10% 이상 증가할 것으로 전망되었다.

• Clean Technology
• /
• v.19 no.1
• /
• pp.30-37
• /
• 2013

Low-rank coal with high water content (32.3 wt%) was dried by fry drying, and the fuel characteristics of the dried coal from which the oil was separated by using a high-speed centrifugal separator were analyzed. After fry drying for 6 min and 10 min, the water content decreased to 5.0 wt% and 4.2 wt% respectively. The higher calorific value (HCV) of the coal increased remarkably after fry drying, from 11,442.0 kJ/kg-wet. The oil content of the fry-dried coal was 15.0 wt% and it decreased with an increase in the reheating temperature: 9.7 wt% at $80^{\circ}C$ to 9.3 wt% at $100^{\circ}C$, and then to 8.5 wt% at $120^{\circ}C$. The recovered oil could then be reused. According to of thermogravimetric analysis (TGA), there was no difference in the weight loss patterns of the coal samples with different coal diameters at a reheating temperature of $120^{\circ}C$. This was because the amount of oil separated by the centrifugal separator was affected by the reheating temperature rather than the coal diameter. And derivative thermogravimetry (DTG) curves of raw coal before the fry-drying process, a peak is formed at $400^{\circ}C$ in which the volatile matter is gasified. In case of the fry-dried coal, the first peak is generated at $350^{\circ}C$, and the second peak is generated at $400^{\circ}C$. The first peak is caused by the oil that is replaced with the water contained in the coal during the fry-drying process. Further, the peaks of the coal samples in which the oil is separated at a reheating temperature of $80^{\circ}C$, $100^{\circ}C$, $120^{\circ}C$, respectively are smaller than that of the coal in which the oil is not separated, and this is caused by that the oil is separated by the centrifugal separator.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.229-236
• /
• 1998

In this paper, thin films of Polyimide (PI) were fabricated by vapor deposition polymerization method (VDPM) of dry processes. The film's properties with curing temperature and electrical properties were studies. The synthesis of hexafluoroisopropyliden-2,2-bis[phthalic anhydride](6FDA) and 4, 4'-diamino diphenyl ether (DDE) was carried out by vapor deposition polymerization(VDP) with the same deposition rate. The evaporation temperature of 6FDA and DDE were $214^{\circ}C$ and $137^{\circ}C$, respectively, so as to preserve balance of stoichiometry. The polymic acid (PAA) made by VDPM were changed to PI by thermal curing. The uniformity and density of PI thin films were increased according to increasing curing temperature. The relative permittivity and dissipation loss factor were 3.7 and 0.008 at the frequency of 100Hz~200KHz, respectively, for the fabricated in the curing temperature of $300^{\circ}C$. Also, the resistivity was about 1.05$\times$$ 10^{15}$$\Omega$cm at $30^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.412-417
• /
• 1999

The analytical results obtained by microwave digestion and acid digestion methods for sample pretreatment to determine metal impurities in silicon wafer by inductively coupled plasma-mass spectrometry (ICP-MS) were compared. In order to decompose the silicon wafer, a mixed solution of $HNO_3$ and HF was added to the sample and the metal elements were determined after removing the silicon matrix by evaporating silicon in the form of Si-F. The recovery percentages of Ni,Cr and Fe were found to be 95∼106% for both microwave digestion and acid digestion methods. The recovery percentage of Cu obtained by the acid digestion method was higher than that obtained by the microwave digestion method. For Zn, however, the microwave digestion method gave better result than the acid digestion method. Fe was added to a silicon wafer using a spin coater. The concentration of Fe in this sample was determined by lCP-MS, and the same results were obtained in the two pretreatment methods.