• 제목/요약/키워드: 증기폭발

검색결과 137건 처리시간 0.024초

양론계수와 연소열을 이용한 Ether류의 폭발하한계 예측

  • 하동명;최용찬;이성진;이수경
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 2003년도 춘계 학술논문발표회 논문집
    • /
    • pp.428-433
    • /
    • 2003
  • 화재 및 폭발 특성치로 인화점, 최소발화온도, 폭발한계, 최소발화에너지, 연소열 등을 들 수 있다. 연소특성은 인화성용제들(석유류 및 알코올류 등)의 취급, 저장, 수송에서 포함되어 있는 잠재 위험성을 평가할 때 고려된다. 여러 연소특성 가운데 폭발한계(explosive limits)는 가연성물질(가스 및 증기)을 다루는 공정 설계 시 고려해야 할 중요한 변수로써, 발화원이 존재할 때 가연성가스와 공기가 혼합하여 일정 농도범위 내에서만 연소가 이루어지는 혼합범위를 말한다.(중략)

  • PDF

산소 농도 변화에 따른 가연성액체의 인화특성에 관한 연구

  • 류태욱;목연수;최재욱;조태제;최일곤
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 1999년도 춘계 학술논문발표회 논문집
    • /
    • pp.93-98
    • /
    • 1999
  • 톨루엔, o-크실렌등의 유기용제는 도료공업 등의 혼합용제와 기계부품의 세척등에 많이 사용되고 있다. 그러나 이들 물질들은 공정상의 제조, 저장, 처리과정 및 취급과 사용 중에 부주의로 인한 밀폐구역에서의 누출로 폭발과 화재사고가 자주 발생하고 있다. 97년 5월 $\Delta$$\Delta$조선소에서 건조 중이던 선박 기관실의 선체 탱크내부 도장작업 중 화재ㆍ폭발이 발생하였으며, 97년 10월 $\square$$\square$조선소에서 수리중이던 유조선의 Tank 내부와 pipe line에 체류중인 가연성 증기가 인화되어 화재ㆍ폭발사고가 98년 6월 김해시 소재 00공업(주)에서 솔벤트로 공작기계 부품을 세척하던중 가연성 증기가 인화되어 화재가 발생하였다. (중략)

  • PDF

액증 전기폭발에 의한 금속 나노분말 제조 (Preparation of the metallic nanopowders by wire explosion in liquid media)

  • 조주현;김병걸;이홍식;임근희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
    • /
    • pp.1538-1539
    • /
    • 2006
  • 직경 0.3mm, 길이 40mm의 은 와이어를 증류수 중에서 전기폭발(wire explosion)을 발생시켰다. 전기폭발에 의해서 액체 중에 충격파 발생에 의한 공간의 형성과 더불어 금속 증기 및 플라즈마가 발생하고, 증기의 응축에 의해서 나노분말이 생성되는 것을 확인하였다. 또한 생성된 나노분말은 생성공간의 붕괴와 더불어 액체속으로 자연스럽게 분산되었다. 제조된 은 나노분말은 비교적 잘 분산된 구형의 분말이었으며 비표면적은 $16.2m^2/g$(평균입도 35nm)을 나타내었다.

  • PDF

주석-물 시스템의 증기폭발 완화에 대한 연구 (A Study on the Mitigation of Vapor Explosions with Tin-Water Sytem)

  • 신용승;김종환;홍성완;송진호;김희동
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2002년도 학술대회지
    • /
    • pp.397-400
    • /
    • 2002
  • Vapor explosion is one of the most important problems encountered in severe accident management of nuclear power plants. In spite of many efforts, a lot of questions still remain. So, KAERI launched a real experimental program called TROI using $UO_{2}$ and $ZrO_{2}$ to investigate the vapor explosion. Besides TROI tests, a small-scale experiment with molten-tin/water system was performed to quantify the characteristics of vapor explosion and to understand the phenomenology of vapor explosion. A vapor explosion was observed while the amount of air bubble and water temperature were systematically varied The mass and temperature of tin are $50\;g\;and\;150^{\circ}C$, respectively. Water temperature is set to $24^{\circ}C\;and\;50^{\circ}C$. The void fraction of air bubble ranges from $0\;to\;10\;{\%}$. The strength of vapor explosion was measured using dynamic pressure sensors attached in reactor tube wall. as a function of void fraction. In addition, a high speed video filming up to 1,000 flame/sec was taken in order to visually investigate the behavior of the vapor explosion .

  • PDF

원자로에서 중대사고시 냉각수의 수심과 용융물 성분이 증기폭발에 미치는 영향 (The Influence of Water Depth and Melt Composition on a Steam Explosion in Severe Accidents in a Nuclear Reactor)

  • 김종환;박익규;홍성완;민병태;송진호;김희동
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 추계학술대회
    • /
    • pp.414-419
    • /
    • 2003
  • In the recent TROI experiments, melts of zirconia and two different compositions of corium were used to observe the occurrence of a steam explosion when it came into contact with water at two different depths. The compositions of the corium were 70 : 30 and 80 : 20 in weight percent of $UO_{2}$ and $ZrO_{2}$, and the mass of the corium was about 10kg. The depth of water in the interaction vessel was 67cm and 130cm. A steam explosion did not occur in the interaction between 80 : 20 corium melt and water at 130cm depth, while steam spikes were observed in the interactions between corium melts of two different compositions and water at 67cm depth. A strong steam explosion occurred in the interaction between 5.43kg of zirconia melt and water at 67cm depth. This fact shows that the explosivity of zirconia is much greater than that of corium.

  • PDF

원자로 노심용융물의 성분비 변화가 증기폭발에 미치는 영향 (An Influence of Corium Composition Variations on a Spontaneous Steam Explosion in Severe Accidents in a Nuclear Reactor)

  • 김종환;박익규;홍성완;민병태;송진호;김희동
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.2041-2046
    • /
    • 2004
  • Recently series of steam explosion experiments have been performed in the TROI facility to identify the influence of corium compositions on the occurrence of a spontaneous steam explosion varying corium melt composition. The compositions of the corium were 0 : 100, 50 : 50, 70 : 30, 80 : 20 and 87 : 13 at weight percent of $UO_2$ to $ZrO_2$, and the mass of the corium was about 10kg. Corium melt at 0 : 100 weight percent (pure zirconia) caused a strong spontaneous steam explosion, and melt at 70 : 30 weight percent(eutectic corium) led to a weak steam spike, while melts at other compositions did not result in spontaneous steam explosions, when they came into contact with 67cm deep water pool at room temperature. It seems that the explosivity of pure zirconia is stronger than that of corium at other compositions and a steam explosion is not likely to occur with corium melts at non-eutectic compositions which are included in mushy zone region.

  • PDF

TROI 실험결과를 활용한 원자력발전소 중대사고시 노외 증기폭발 하중평가 (An Evaluation of the Ex-vessel Steam Explosion Load Against TROI Experimental Results)

  • 박익규;김종환;민병태
    • 대한기계학회논문집B
    • /
    • 제33권8호
    • /
    • pp.622-628
    • /
    • 2009
  • The TEXAS-V code tuned for TROI-13 was used for analyzing the parametric findings in TROI experiments. The calculations on the melt composition are relatively similar to the TROI experimental results. The water depth effect in TEXAS-V code seems to be consistent with TROI experiments in some degree. The water area effect of TEXAS-V calculations seems not to be harmonious to that in TROI experiments. This seems to indicate that TEXAS-V as 1-dimensional code or as the numerical steam explosion has a limitation on estimating area effect. Thus, TEXAS-V tuned for TROI-13 seems to have an ability to estimate the parametric effect of TROI experiments. The evaluated TEXAS-V was used for estimating the ex-vessel steam explosion load. The calculated explosion pressure and load were about 40 MPa and 75 kPa.sec, which are not much threatening level for containment integrity.

한국표준형원전 증기발생기 전열관 확관부위의 응력해석 (Stress Analysis of Expansion Transition Area in Steam Generator Tube of Optimized Power Reactor-1000)

  • 김용규;송명호;유완
    • 에너지공학
    • /
    • 제22권2호
    • /
    • pp.148-155
    • /
    • 2013
  • 한국표준형원전(OPR-1000)의 증기발생기 전열관은 관재료로 Alloy 600과 Alloy 690이 사용되고 있으며 전열관 확관방법은 폭발확관법이 적용되었다. 원전 운전경험에 따르면 전열관 확관법으로 폭발확관법이 사용된 증기발생기의 전열관들은 원주방향 균열이 잘 발생하였으며 그 위치는 전열관의 확관천이부위 외면이었고 슬러지에 의해 둘러싸인 지역이었다. 그러나 같은 조건의 전열관이라도 수압확관법이 적용된 경우는 원주방향 균열보다는 축방향 균열이 우세한 경향을 보여왔다. 따라서 본 연구에서는 상기와 같은 차이를 규명하기 위하여 전열관과 관판의 형상을 모델링하였으며 확관법에 따라 운전중 조건에서 전열관의 확관천이 부위에 작용하는 응력의 크기를 전산프로그램을 사용하여 계산하였고, 균열의 방향성과 우세성을 평가하였다.

증기운 폭발에 의해 발생된 폭풍 과압 예측 모델 검토 (A Review of the Different Models for Predicting Blast Overpressures Caused by Vapor Cloud Explosions)

  • 박달재;이영순;임영훈
    • 한국가스학회지
    • /
    • 제4권4호
    • /
    • pp.50-57
    • /
    • 2000
  • 가연성 증기 또는 가스 누출로 인해 발생하는 증기운 폭발은 엄청난 과압을 생성시켜 사고 영향이 매우 크기 때문에 공정 중에 잠재하고 있는 사고의 위험요소를 발굴하여 제거하여야 한다. 이를 위해서는 사고 결과 영향평가가 선행되어야 한다. 이러한 평가를 수행하기 위해서는 신뢰할만한 예측 도구(Tool)가 필요하다(13). 현재 여러 가지 사고결과 피해예측 모델이 제시되어 활용되고 있는 바 이러한 예측 모델(TNT-Equivalency, TNO Hemispherical, TNO Multi-Energy, CFD)이 어느 정도 타당성이 있는지에 대한 검토가 필요하다. 따라서 본 연구에서는 증기운 폭발 위험성 정량화를 위해 사용된 각 모델을 비교 검토하여 여러 가지 모델의 가정 및 정확성을 알아보고 가장 타당성 있는 모델을 선정 하고자 한다.

  • PDF