• Korean journal of applied entomology
• /
• v.4
• /
• pp.19-24
• /
• 1965

In an attempt to find a satisfactory environmental factors which facilitate abundant conidial production of Piriculariaoryzae Cav. on tomato juice media, various environmental factors were studied for their effect on sporulation and mycelial growth of the fungus. Those factors were conditions of irradiation, color of light, age of culture and pH of the media. l) Continuous exposure to fluorescent light (Mitsubish FL-20-35 W) produced more conidia and much mycelial growth than did intermittent photoperiods and darkness. 2) Of 3 cellophane filters and direct exposure to fluorescent light used, conidia were produced best under the direct exposure to the light. Conidial production in color filter conditions sequently decreased with red, yellow and blue. Growth of mycelium was not significantly different within colors. 3) Periodic irradiation of 12-hour unit brought about zones on mycelial growth no matter what the color filter was used. 4) Older cultures responding to the light were more stimulated by light than were the younger one in the conidia production, but maximum production of conidia was 48 hours of age in this case. 5) Color of the mycelial mat and the aerial mycelium seemed to have a close relation to the production of conidia. The more darkness of the mycelial mat was produced the more conidia and the much aerial mycelium was produced the least conidia. The color of mycelium was more dark under the continuous irradiation than continuous darkness, while the periodic irradiation showed intermediate effect. 6) The concentration of hydrogen ion for growth and sporulation of the fungus was investigated the ranges between 5 and 9. The best pH for the fungus was also noted at 7. whereas the below of pH 4 was not occurred any mycelial growth and sporulation.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.50-50
• /
• 2011

발수가공은 섬유표면에 낮은 표면에너지 물질을 도포하여 섬유제품에 적심 저항성을 부여하는 것으로 일반적인 방법으로는 불소계 고분자 물질을 포함한 가공제액을 부여하고 열에너지원을 사용하여 섬유 표면에 경화하여 고착시키고 처리온도는 $150{\sim}170^{\circ}C$의 범위에서 수 분 처리하지만 처리시간을 증가하면 섬유에 황변을 일으킬 수 있고 직물의 한 면에만 발수성을 구현하기가 어렵다. 피부와 접촉하는 부위에서의 불필요한 발수성은 땀 흡수저하, 알러지 발생 우려 등 쾌적성 저하 요인이 될수 있어 스포츠, 레저 의류 분야에서는 섬유제품의 일면만을 발수처리 하는 가공이 필요되어진다. 편면 발수가공을 위한 선행기술로는 상하 중 하나의 롤러에만 발수제를 묻혀 섬유제품의 일면에만 발수가공을 하는 것과 분사기로 발수제를 섬유제품의 일면에 도포하는 것 등이 있다. 하지만 일면에 처리된 발수제가 반대면으로 침투하거나 균일한 발수처리가 되지 않는 등의 문제점이 있고 발수제의 농도증가 및 증점제를 사용하여 점도를 증가시켜야하기 때문에 발수처리의 균일성 및 내구성 있는 편면발수공정이 어려운 단점이 있다. 본 연구에서는 UV경화가 가능한 불소계 발수제와 물에 용해되는 광개시제가 첨가된 수용액을 PET직물에 패딩하고 UV로 경화하여 양면 모두 발수성을 부여한 후 UV조사로 표면개질하여 표면친수성을 증가시켜 양 면의 발수성을 조절하였다.

• Journal of Chest Surgery
• /
• v.34 no.2
• /
• pp.111-117
• /
• 2001

배경: 심근 수축력과 더불어 전신저항은 개심술 후 적절한 심박출량을 유지하기 위한 매우 중요한 요인이다. 후부하의 변화를 비관혈적으로 평가할 수 있는지 알아 보고자 대동맥 혈류파형의 변화를 관찰하였다. 대상 및 방법: 개흉한 8마리의 잡견에서 연속파형 Doppler 심초음파를 이용하여 nitroprusside 단독 또는 epinephrine과의 병합투여 잔후로 상행 대동맥 혈류를 측정하였다. 결과: Nitroprusside의 투여로 동맥압과 전신저항은 약물의 투여량에 비례하여 감소함으로써(p<0.05 vs 기준치), 대동맥 혈류파형의 최고속도, 평균가속 및 분거리(속도시간적분$\times$심박동수)는 증가하였고, 가속시간은 짧아졌으며(p<0.05 vs 기준치), 가속시간/박출시간의 비는 변화가 없었다. Nitroprusside 투여로 인한 전신저항의 변화는 속도시간적분이나 Doppler 시간간격 지표보다는 최고속도(r=0.60, p=0.001)와 평균가속(r=0.52, p=0.003)과 상관관계가 있었다. Epinephrine과의 병합투여로 전신저항이 증가하지 않는 한 nitroprusside 단독투여에 비해서 최고속도, 평균가속 및 속도시간적분이 더 크게 증가했으나, 전신저항이 증가되면 이 Doppler 지표들은 감소하는 경향을 보였다. 결론: Doppler 심초음파를 이용하여 상행 대동맥 혈류파형의 최고속도와 평균가속을 연속적으로 측정함으로써 후부하의 변화를 비관혈적으로 평가할 수 있으리라 생각된다.

• Environmental and Resource Economics Review
• /
• v.12 no.2
• /
• pp.327-346
• /
• 2003

Unlike previous studies on the causal relationship between energy consumption and economic growth, this paper analyses the dynamic causal relationship between these variables using the dynamic vector using Johansen's multiple cointegration procedure, dynamic vector error-correction model and impulse response function. The empirical results show that while the energy consumption to a shock in income responds positively, the income responds positively to the shocks in energy consumption in the first place and then the responses become negative. We also find that the impact of energy consumption shock on the income is short-lived and causes higher inflationary pressure.

• Journal of Veterinary Clinics
• /
• v.29 no.5
• /
• pp.361-367
• /
• 2012

Diabetes-related complications in human and veterinary medicine have been shown to be associated with hyperglycemia-induced inflammation. It has been recently suggested that the onset of insulin resistance may be caused by over-production of inflammatory cytokines such as tumor necrosis factor (TNF)-${\alpha}$ from immune cells. Conjugated linoleic acid (CLA) regulates inflammatory response through modulation of TNF-${\alpha}$ expression. The objective of this study was to examine the effect of CLA on nuclear factor kappaB (NF-${\kappa}B$) p65 binding activity, inhibitory kappaB ($I{\kappa}B$)-${\alpha}$ expression, and TNF-${\alpha}$ production from high glucose-treated RAW 264.7 cells. CLA was added to RAW cells that had been previously cultured with low or high concentration of glucose. The levels of TNF-${\alpha}$ protein in the culture supernatant of RAW cells exposed to high concentrations of glucose were higher than those of cells exposed to low concentrations of glucose. The treatment with the high concentration of glucose in RAW cells increased levels of NF-${\kappa}B$ p65 binding activity and the decreased $I{\kappa}B-{\alpha}$ expression when compared with those of low glucose. The treatments in combination with CLA and glucose (low and high) glucose in RAW cells increased TNF-${\alpha}$ production when compared with that glucose alone. These treatments with CLA increased TNF-${\alpha}$ production in high glucose-treated RAW cells than those with low glucose. These treatments of CLA also showed higher NF-${\kappa}B$ p65 binding activity and lower $I{\kappa}B-{\alpha}$ expression in high glucose than those in low glucose condition. This suggests that CLA can increase NF-${\kappa}B$ p65 binding activity and TNF-${\alpha}$ production from high glucose-treated RAW 264.7 cells and is likely to promote hyperglycemia-induced inflammation.

• Environmental and Resource Economics Review
• /
• v.24 no.1
• /
• pp.189-224
• /
• 2015

To meet sectoral emission target by 2020 and prepare for the emission trading scheme from 2015, decomposition analysis of energy consumption and GHG emission is required by 18 subsectors in industry sector where emission targets are established. Log Mean Divisia Index decomposition method was used to analyze factors' effects on energy and emission in the industry sector and by 18 subsectors from 2004 to 2011. Industrial energy consumption was increased due to the production effect and energy intensity effect. However structure effect contributes to the decrease of energy consumption. In terms of emissions (including indirect emission due to electricity consumption) in the industry sector, only structure effect contributed to the emission reduction. Factors' effects by subsectors were different. Cement industry, which is included at Nonmetal shows different results from those of Nonmetal industry and machinery industry, which is a subsector of Fabricated Metal, was also similar. In this regard, we should not apply the policy implications from decomposition analysis of aggregated industry such as Nonmetal or Fabricated Metal to its subsectors uniformly and develop a differentiated policy for each subsector industry.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.257-290
• /
• 2005

Korean energy use in industrial sector has increased more rapidly than other sectors during 1980~2000 periods. Relatively higher increases in industrial sector energy consumption raise questions whether government policy of rationalization of industrial energy use has been effective. In this study, we use 80-85-90 and 90-95-00 constant price input-output table to analyze increases in industrial energy use. Using an adjusted version of structural decomposition model introduced by Chen and Rose (1990), we decompose Changes of energy use into 17 elements. We classify entire industry sector into 32 sectors including four energy sectors (coal and coal products, refined petroleum, electricity and town gas). We then analyze changes of energy use by industrial level to check differences among industrial energy demand structures. Finally, we compare three industries, electronic product manufacturing, metal manufacturing and construction, that represent technology and capital intensive, energy and material intensive and labor and capital intensive industry. As results, we find that high energy using industries make the most effort to reduce energy use. Primary metal, petrochemical and mon-metal industries show improvements in elements such as energy and material productivity, energy and material imports, energy substitution and material substitutions towards energy saving. These results imply that although those industries are heavy users of energy, they put the best effort to reduce energy use relative to other industries. We find various patterns of change in industrial energy use at industrial level. To reduce energy use, electronic product manufacturing industry needs more effort to improve technological change element while construction industry needs more effort to improve material input structure element.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.1
• /
• pp.37-40
• /
• 1999

This study was carried out to determine the optimal conditions for the production of plants derived from the unpollinated ovary culture of Chinese chive (Allium tuberosum Rottl.). The Chinese chive collected from Korea showed much higher frequency of plantlet formation than those from Japan in the culture of unpollinated ovaries. Among the collections, 'Youngiljaerae' showed the highest frequency of plantlet formation. The MS basal medium was superior to B/sub 5/ in plantlet formation. The ovaries inoculated on the 2,4-D-free medium were directly induced plantlets without callus formation. Floral parts inoculated as a unit played important roles in callus formation and plant production. The frequency of callus and plantlet formation was higher in the culture of ovary with anthers than that of ovary alone.

• Membrane Journal
• /
• v.19 no.3
• /
• pp.237-243
• /
• 2009

Polyimides synthesized by using 2,2'-bis(3,4-carboxylphenyl) hexafluoropropane dianhydride (6FDA) and 4,4'-diaminodiphenylmethane (DAM) were sulfonated according to reaction times, 5 min to 20 min. And the resulting polyimide membranes were investigated in terms of permeability and separation factor for $N_2$, $O_2$, and $CO_2$ gases. The introduction of bulky group, $-{SO_3}H$, leads to the decreases of both diffusivities and solubilities for all the range of reaction times. At 20 min of sulfonation, the diffusivity and solubility of $N_2$ decrease up to 21% and 26%, respectively. Overall separation efficiencies for $O_2/N_2$ and $CO_2/N_2$ increase as the reaction time increases to 20 min.

• Applied Biological Chemistry
• /
• v.29 no.3
• /
• pp.241-247
• /
• 1986

The relationship between rice and the fluid during cooking was investigated to examine the factors affecting the quality of cooked rice and a new rice cooking method was proposed to improve the unpalatability of aged Milyang 23-long grain rice variety. The changes of heights of rice-bed and the fluid during cooking were measured with a laboratory cooking apparatus made of flat bottomed graduated glass cylinder. Around the boiling, a sudden disappearance of the fluid was observed and then thin film was formed on the rice grains. This film coating was fortified by the addition of 1-2%(w/w) of glutinous rice powder as a film forming agent. The artificial coating on the cooked rice of low quality remarkably improved the gloss, moisture content and shape and the extent of leaching of rice solid into the fluid was reduced with the treatment.