• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.434-441
• /
• 2010

Sodium polyacrylate (PAANa) was synthesized by inverse emulsion polymerization method to absorb excess water in concrete. Liquid paraffin was used as a continuous phase. Acrylic acid (AA) was neutralized by aqueous sodium hydroxide solution (8 M). Different amount of N,N'-methylene bisacrylamide (MBA) was used as a crosslinking agent to change crosslinking density of the synthesized PAANa. The size distribution of synthesized particles was measured by particle size analyzer. Swelling ratio of crosslinked PAANa was evaluated from the equation in D. I. water, cement aqueous solution, and $Ca(OH)_2$ aqueous solution. The FTIR spectroscopy was used to characterize $Ca^{2+}$ ion interaction with PAANa. Incorporation of 1.0 wt% PAANa into cement increased compressive and flexural strength approximately 30% and 10%, respectively, compared with those of ordinary portland cement.

• Applied Biological Chemistry
• /
• v.27 no.3
• /
• pp.198-203
• /
• 1984

Ethanol fermentation of chemically gelatinized starch and uncooked raw starch was nested with various starchy materials. Starches were gelatinized by 5.4% NaOH and neutralized by sulfuric acid. The patterns of $CO_2$ evolving and the ethanol yield for the chemically gelatinized starch resemble those obtained with thermally gelatinized starch. The alcoholic fermentation of raw starch was carried out by the simultanous saccharification-fermentation using a commercial glucoamylase and yeast. Ethanol yield from uncooked rice starch fermentation was highly comparable to that from cooked one. $CO_2$ evolving rates of the uncooked starches of corn, barley, tapioca and sweet potato were lower than those of the cooked starches. However, the final ethanol yields were similar or slightly lower, depending on the types of starch.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2005

In this paper, peak-to-average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) with respect to the subchannel coding schemes for interchannel interference (ICI) self-cancellation is analyzed. It is shown theoretically and experimentally that a shaping component is generated in the transmitted sequence in the conventional correlative coding where a pair of antipodal signals is assigned in adjacent subchannels. Due to the shaping component, the signal powers in the mid and edges of a symbol are scaled by different weighting coefficients, resulting in increased PAPR. To overcome this problem a simple adjacent subchannel coding scheme is presented in this paper. In the new scheme, the shaping component caused by partial repetition of signals is eliminated by assigning a pair of signals in which phase difference varies signal-to-signal. As results, the new scheme has 2-3 dB smaller PAPR than the conventional ICI self-cancellation OFDM while maintaining much higher carrier-to-interference ratio than a normal OFDM system.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.3
• /
• pp.79-84
• /
• 2002

The optimal operation conditions, including voltage applied, reaction time, distance between electrodes. and electrode material. were investigated for the treatment of soil flushing effluent using electrofloatation. When 3V was applied for 1 hour, 88% oil-water separation efficiency was achieved. In case of 6V and above, 90% efficiencies were achieved. As reaction time and distance between electrodes were longer, separation efficiencies were higher and lower, respectively. Separation efficiencies for different anode materials were copper > aluminum > iron > titanium. It might result from the differences of their electrical conductivities.

• Journal of fish pathology
• /
• v.13 no.1
• /
• pp.53-59
• /
• 2000

Presence of marine birnavirus (MABV) was examined against egg and ovarian fluid, and seminal fluid from the brood stocks of flounder, Paralichthys olivaceus collected from 9 different stations around Korean peninsula. The detection rate of MABV in brood stocks flounder was observed to 34% by PCR. The mean virus titer of the PCR positive fish was $10^{2.30}$ to $10^{4.30}$ $TCID_{50}$/g(ml). By a neutralization test, all of the isolated virus were ascertained to be closely related to marine birnavirus (MABV).

• Resources Recycling
• /
• v.17 no.3
• /
• pp.3-9
• /
• 2008

The measurement of physicochemical properties and chemical composition of SSA(sewage sludge ash) has been carried out and the preparation of lightweight material has also been performed using SSA for reuse as building or construction materials. For this aim, lightweight material has been prepared by forming the mixture of SSA, lightweight filler and inorganic binder followed by calcination at elevated temperature and characterized in terms of density and compressive strength. The pH of fly ash was found to be slightly alkaline, pH 8.69, due to the addition of caustic soda in order to neutralize the acidic gas while the pH of bottom ash was 6.48 Heavy metal leachability based on the standard leach test was also found to be below the detection limit for Cd, Cu, Pb, As and Cr of SSA. As far as the compressive strength of lightweight material was concerned, the compressive strength of lightweight material using fly ash was higher than that of lightweight material using bottom ash.

• Resources Recycling
• /
• v.9 no.3
• /
• pp.29-36
• /
• 2000

A study on the recovery of gallium from leaching solutions is carried out by solvent extraction in order to produce gallium oxide of high purity. The results show that the extraction of gallium is found to be increase with acidities of aqueous solution up to 7.4 M/L when pure isopropyl ether is used. And the extraction of iron also increases with increasing acidity of aqueous solution. It appears that the separation of gallium from iron cannot be satisfactorily accomplished with isopropyl ether. But, in the case of extaction with D2EHPA, almost complete extraction of iron is achieved-leaving all the gallium in the aqueous solution-by maintaining the acidity of aqueous solution at 2 M/L. Accordingly, $Ga_2O_3{\cdot}H_2O$ of more than 99wt.% in purity can be produced from zinc residues through the processes comprising of alkali leaching, precipitation by neutralization and solvent extraction using isopropyl ether and D2EHPA as extractants.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.23-28
• /
• 1992

The process for recovery of acids and valuable metals such as nickel and chromium from the stainless-steel pickling acids has been developed vased on the use of solvent extraction technique. Until now, several processes for the treatment of waste acids were already developed in such countries as Japan, Swden and Canada. Those methods are, however, forcussed on the recovery of acids from them discarding the metals included in them as the hydroxides sludge. In the present work, the recovery of nickel and chromium in addition to nitric acid and hydrofluoric acid has been aimed so as to recycle them to the stainless-steel pickling lines and also to minimize the amount of sludge generated during the treatment of waste acids. The establishment of the process to recover the acids has been carried out based on the solvent extraction with TBP. The iron was eliminated from the waste solutions by precipitating in the form of hydroxide through the adjustment of pH with calcined limestone and the selective extration of chromium and nickel from the resultant solutions has been conducted by using D2EHPA as extractant.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.306-311
• /
• 2003

In this paper, we modeled the incident beam in order to analyze and evaluate the optical thin film device for wavelength division multiplexing in optical telecommunication network. As applied ray tracing method to the optical path, we were compared the accuracy of coupling efficiency simulated by two modeling methods. In the results of sinulation, ceil modeling method was preferred to annual modeling method in micro-optic device because of accuracy for coupling efficiency and Gaussian intensity distribution. In the results of optimal simulation for optical device using thin film filter, the distance (d1) between optical fiber and GRIN lens, the distance (d2) between GRIN lens and thin film filter and the coupling efficiency were 0.24 mm, 0.25 mm and -0.11 ㏈ respectively. As d2 was displaced at 0.25 mm and d1 was varied in order to evaluate the optimal value, d1 and maximum coupling efficiency were 0.24 mm and -0.35㏈, respectively. Then the results of experiment were corresponded to that of optimal simulation by cell modeling and it was possible to analyze the performance for optical device using thin film filter by the simulation.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.1
• /
• pp.21-30
• /
• 2003

Background : Mucin synthesis in airways has been reported to be regulated by the epidermal growth factor receptor (EGFR) system. Epidermal growth factor receptor transactivation was identified as a critical element in G-protein-coupled receptors (GPCRs)-induced mitogenic signaling. EGF receptor transactivation by G-protein-coupled receptors requires metalloproteinase cleavage of proHB-EGF. This study was hypothesized that lipopolysaccharide (LPS)-induced mucin production associates with epidermal growth factor receptor transactivation, and MUC5AC production associates with epidermal growth factor receptor transactivation by G-protein-coupled receptors that regulates by metalloproteinase. Method : MUC5AC mucin production was examined in NCI-H292 cells and MUC5AC protein synthesis was assessed using ELISA. For the evaluation of mechanism of LPS-induced MUC5AC production, $TNF{\alpha}$ was measured using ELISA with or without pretreatment of heterotrimeric G-protein inhibitor, mastoparan. MUC5AC protein was measure with pretreatment of polyclonal $TNF{\alpha}$ antibody or mastoparan on LPS-induced MUC5AC production. For the evaluation of relation of G-protein and MUC5AC production, G-protein stimulant, mastopara-7, or matrix metalloproteinase, ADAM10, was added to NCI-H292 cells. MUC5AC protein was measure with pretreatment of polyclonal EGF antibody on mastoparan-7-induced MUC5AC production. Results : LPS alone did not increase significantly MUC5AC production. LPS with $TNF{\alpha}$ induced dose-dependently MUC5AC production in NCI-H292 cells. LPS increased dose-dependently $TNF{\alpha}$ secretion, which was inhibited by mastoparan. LPS with $TNF{\alpha}$-induced MUC5AC production was inhibited by neutralizing polyclonal $TNF{\alpha}$ antibody, mastoparan or AG 1472. Mastoparan-7 or ADAM10 increased dose-dependently MUC5AC production, which was inhibited by polyclonal neutralizing EGF antibody. Conclusion : In LPS-induced MUC5AC synthesis, LPS causes $TNF{\alpha}$ secretion, which induces EGFR expression. EGFR tyrosine kinase phosphorylation result in MUC5AC production. EGF-R transactivation by G-protein-coupled receptors requires matrix metalloproteinase cleavage of proHB-EGF.