• Korean Journal of Heritage: History & Science
• /
• v.50 no.2
• /
• pp.116-139
• /
• 2017

Naksansa Temple was famous for a miracle temple where Lee Haeng-ri(李行里), King Ikjo(翼祖), had prayed for offspring and soon begat King Dojo(度祖). According to the First King's Annals("太祖實錄"), King Dojo was the person who directly received prophecy of founding a Joseon. For these reasons, Naksansa Temple received attention concerning the foundation of Joseon. The birth story of King Dojo and his father's prayer at the Avalokitesvara Bodhisattva cave(觀音窟), Naksansa Temple, was well known among the noblemen and royal families until the Late Joseon period. Lee Seoung gye(李成桂) paid particular attention to the Naksansa Temple, and King Sejo(世祖) also made people rebuild the temple when he went for a royal tour in Gangwon-do. Naksansa Temple was built during the time when King Sejo made many temples in order to strengthen the royal authority. King Sejo made people extensively rebuild the temple, praying for health and longevity of King Yejong(his son). King Sejo's will of rebuilding the Naksansa Temple was very strong. The residents of the area had to pay a huge cost because the rebuilding of the Naksansa Temple was a big construction. Hak-yeol(學悅), who had a responsibility of rebuilding the Naksansa Temple, forcedly obtained supplies as he received protection from the royal family. Naksansa Temple thrived with the protection of the royal family after rebuilding. King Yejong and Seongjong gave Naksansa Temple slaves and fields(田地). He also bestowed upon the temple the salts which was the tribute paid by Gangwon-do. In order to protect the precincts of the Naksansa Temple, the government closed the Yang Yang Main Street near Naksansa Temple and built a new road. And the signs of preventing fishing(捕漁) was built along the coast of Naksan in four kilometers in order to keep people out. Although the Naksansa Temple declined in the late Joseon period, it still received support under the protection policy and maintained its reputation as an original Buddhist shrine.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.125-130
• /
• 2006

To understand the effect of midsole on the bending stiffness of footwear, bending moment is studied with various hardness and thickness of polyurethane(PU) and poly(ethyl one-co-vinylacetate)(EVA) foams which composed in footwear midsole. The initial bending moment of footwear was appeared at $19^{\circ}$ on bending angle of footwear, and this bending angle was not depend on thickness and hardness of midsole. The bending moments of footwear were also increased with increase of the hardness and thickness of misole which were composed in footwear. Increased hardness and increased thickness of foam and midsole also cause a greater bending moment of the sports shoe, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1078-1084
• /
• 2011

In design of sport footwear, bending stiffness of its toe part is an important factor though it can be hardly measured. This paper introduces a device for measuring the bending stiffness. The device is simply designed with aluminum frames, one AC motor, two load-cells, one encoder and control hardwares. The mechanism measuring the bending moment of a shoe is described. Then, it was used to observe how the midsole material and design of a sports shoe affect on its bending stiffness. For the experiments, various specimens prepared, where each midsole of the specimens is different in terms of material, thickness and hardness. With those specimens, experiments were performed by using the device and then the bending stiffness was computed by applying the least square curve fitting after the bending moment data were measured. The specimen with Poly-urethane(PU) midsole has the higher bending stiffness than the one with Phylon(PH) midsole, and the midsole thickness affects more on the bending stiffness than the midsole hardness. Based on those results, it can be concluded that the measurement device can provide consistent bending stiffness data to sports footwear and the bending stiffness of a footwear measured by the developed device can be used as a major parameter in the footwear design.

• Korean Architects
• /
• no.12 s.153
• /
• pp.20-23
• /
• 1981

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.304-308
• /
• 2005

본 연구는 발포수지 공정에 사용되는 가스벤트를 신발중창 금형에 자동으로 교환하는 장치에 관한 것이다. 가스벤트는 폴리우레탄과 같은 소재를 이용한 신발 미드솔 발포시 발생되는 가스를 제거하기 위한 다공질 소자로서 신발금형 상부에 삽입된다. 가스벤트는 소모성 부품으로 일정주기마다 교환이 필요하나 작업공정상 수작업에 어려움이 많아 자동화된 교환시스템이 요구된다. 하지만 삽입되는 신발중창 금형과 가스벤트간은 유격이 거의 없으므로 본 연구에서는 신발 중창 금형의 손상을 방지하고 보다 신속한 교환을 위해 가스벤트 삽입 및 추출 홈의 위치정보를 영상을 통해서 구하고, 얻어진 영상에 대한 위치 데이터를 기계적 위치 추적 시스템의 데이터로 피드백 하여 홀의 중심 위치에서 가스벤트를 삽입 및 추출하여 자동으로 교환하는 장치를 구현하였다. 영상 처리는 패턴 매칭 기법을 이용하여 홀의 중심점을 구하였고, 이를 PLC로 전송하여 기계 작동 제어 및 XY플로터를 정밀 제어하여 공정이 진행되게 하였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1996.10a
• /
• pp.1169-1172
• /
• 1996

• Elastomers and Composites
• /
• v.39 no.3
• /
• pp.186-192
• /
• 2004

Compression and rebounding properties of IP(injection phylon), PH(phylon) and PU(polyurethane) foams were studied. The compression stress, rebounding stress, loss compression energy and storage compression energy of foams were decreased with increasing hardness of foams. The compression stress, loss compression energy of IP foams were lower than those of PH and PU. Rebounding stress and storage compression energy of PU foams were higher than those of IP and PH. The compression stress and rebounding of PH foam were lower than those of IP and PU.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.157-157
• /
• 2003

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.69-72
• /
• 2002

화상처리에 의한 수화인식은 손의 움직임에 대한 추적을 통한 그 궤적의 정보를 이용하여 주로 처리하여 왔다. 본 논문에서는 궤적 정보만으로 정확히 인식할 수 없는 수화 단어에 대하여 국소 특징 인식 기법을 통하여 보다 정확한 인식을 행한다. 제안한 방법에 의하여 95%이상의 인식 결과를 얻을 수 있었다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.2 s.161
• /
• pp.258-268
• /
• 2007

The purpose of this research is to develop functional midsole that can restrain the heightening of plantar pressure in forefoot pressure so as to develop high-heeled shoes that can lessen foot ailments among women. The pumps shoes used for the research were of the same pumps type last. The variant was heel height, 3cm, 6cm, and 9cm, and the shoes were made in both normal midsole and functional midsole. The variant was applied to investigate the changes of foot pressure on forefoot and hindfoot according to heel height.'Heel Cup' was chosen for modification of functional midsolepumps type. to enlarge contact area in hindfoot, and 'Heel Posting Pad' was attached under sustentaculum tali to suppress the weight moving to forefoot pressure. If such functional parts are developed and used, it is possible to lessen the amount of Pmax or Impulse imposed by high-heeled pumps type on forefoot pressure. This can greatly lessen foot ailments, largely caused by high-heeled shoes, among women.