• Title/Summary/Keyword: 중전기구

Search Result 10, Processing Time 0.025 seconds

정부시책

  • Korea Electrical Manufacturers Association
    • NEWSLETTER 전기공업
    • /
    • no.96-24 s.169
    • /
    • pp.11-12
    • /
    • 1996
  • PDF

전기공업 동향 및 '96년 전망 보고서

  • Korea Electrical Manufacturers Association
    • 전기산업
    • /
    • v.6 no.4
    • /
    • pp.80-101
    • /
    • 1995
  • 「본 보고서는 진흥회가 주요 중전기구」업체120개사를 대상으로 '96년 경기 전망을 조사한 것으로 기업 경영의 참고 자료로 게재하는 것입니다.」<조사과>

  • PDF

업계동정

  • Korea Electrical Manufacturers Association
    • NEWSLETTER 전기공업
    • /
    • no.97-4 s.173
    • /
    • pp.38-39
    • /
    • 1997
  • PDF

CIGRE(국제고전압전기시스템회의) 소개

  • 박영문
    • 전기의세계
    • /
    • v.28 no.3
    • /
    • pp.16-18
    • /
    • 1979
  • 우리나라 전력계통의 대규모화 내지 초고압화 추세와 국내 중전기공업계의 비약적 발전에 힘입어, 최근 이방면에 종사하는 국내전문직자간에는 CIGRE애 관한 관심이 점고하고 있고, 전기회관를 중심으로 한 몇몇 단체에서는 CIGRE 국내위원회의 구성과 CIGRE 기구에의 가입을 추진하고 있다. 따라서, 필자는 본지를 통하여 CIGRE에 대한 개괄적인 소개를 하고져 한다.

  • PDF

정지기기의 개발현황 및 전망

  • 노철웅
    • 전기의세계
    • /
    • v.45 no.12
    • /
    • pp.40-44
    • /
    • 1996
  • 최근의 우리나라의 전기기기의 기술개발은 수입자유화정책에 따라 국내시장에서도 선진국과의 경쟁이 불가피해짐에 따라 기업의 기술개발이 더욱 절실해지고 있다. 세계무역기구(WTO)의 출범은 전세계를 무한 경쟁시대로 돌입시키고 있으며 이러한 무한경쟁시대의 구도에서 살아남기 위해서는 국가나 기업 모두 경쟁력을 갖추는 것만이 시급한 실정이다. 중전업계도 세계적인 경쟁력 확보를 위해서 적극적, 공격적 전략경영으로 우리의 위상과 경쟁력을 높여나갈 때라 생각되며 이것은 기업간의 협력과 산.학.연의 상호 협력이 있을 때 가능하다. 정부는 제조업의 경쟁력강화의 방안으로 한국전력공사로 하여금 전기기기의 생산기술 개발사업자금 지원으로 1991년부터 1996년까지 연간 200억원 규모를 지원하게 하였고 또, 한전에서 자발적으로 연간 200억원정도의 자금을 조성하여 기술개발 지원사업을 전개하고 있어 기술개발의 촉진이 예상된다. 중전업계에서는 차기 송전전압공사용인 765kV급 변압기, 차단기 개발등의 핵심 설계제조기술개발에도 박차를 가하고 있다.

  • PDF

Load Transfer Mechanism of Drilled Shafts in Weathered Rock (풍화된 암반에 근입된 현장타설말뚝의 하중전이기구)

  • ;Cho Sung-Min;Jung Sung-Jun;Kim Myoung-Mo
    • Journal of the Korean Geotechnical Society
    • /
    • v.21 no.5
    • /
    • pp.187-196
    • /
    • 2005
  • Since the allowable bearing capacities of piles in weathered/fractured rock are mainly governed by settlement, the load-displacement behavior of pile should be known accurately. To predict pile head settlement at the design stage, the exact understanding of the load-transfer mechanisms is essential. Therefore, in this research, the load-transfer mechanism of drilled shaft socketed into weathered rock was investigated. For the investigation, five cast-in-place concrete piles with diameters of 1,000 mm were socketed into weathered gneiss. The static axial load tests and the load-transfer measurements were performed to examine the axial resistant behavior of the piles. A comprehensive field/laboratory testing program on weathered rock at the Held test sites was also performed to describe the in situ rock mass conditions quantitatively. And then, the effect of rock mass condition on the load transfer mechanism was investigated. The f-w (side shear resistance-displacement) curve of the pile in moderately weathered rock reached to yielding point at a for millimeter displacements, and after yielding point, the rate of resistance increment dramatically decreased. However, the f-w curve in the highly/completely weathered rock did not show the obvious yielding point, and the resistance gradually increased showing the hyperbolic pattern until relatively high displacement (>15 mm). The q-w (end bearing resistance-displacement) curves showed linear response at least until the base displacement of approximately 10 mm, regardless of rock mass conditions.