• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.4
• /
• pp.83-90
• /
• 2019

In this study, the characteristics of the SRF (Solid Refuse Fuel) prepared by blending each of the additives (citrus peel, waste wood, coal) in the heavy oil fly ash, evaluating the heavy oil fly ash recyclability. Recycling SRFs were fabricated by pellet extruding method after blending the heavy oil fly ash and additives based on 30% moisture content. As a result, the formability of the SRFs was excellent under condition of blending heavy oil fly ash with coal or citrus peel and the highest calorific value was 4,274 kcal/kg at heavy oil fly ash mixed with coal. Therefore, the formability and calorific value were improved when the heavy oil fly ash was mixed with coal(20 wt%) at 30% moisture content. From these results, the applicability of SRFs with additives was confirmed by using the heavy oil fly ash from J thermal power plant.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.625-630
• /
• 2010

This study aims to examine the possible use of heavy oil fly ash as raw material for deodorization panels by adding additives such as activated carbon and diatomite during deodorization panel manufacturing process and improving the performance of formaldehyde and toluene elimination.The recycled heavy oil flyash deodorization panel to be used either of them as additives removed more than 93% of formaldehyde and more than 97% of toluen but the compressive strength was decreased 27 to 63%. In an experiment to be used both additives, Whereas, the panel to include activated carbon 5% and diatomite 5% removed 84% against formaldehyde and 96% against toluen, and the compressive strength was increased 32% better than standard panel. Therefore it could be confirmed that the recycled heavy oil flyash deodorization panel is increased the compressive strength and the removal efficiency against harmful chemical substances by using the additives mixture.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.22-29
• /
• 2009

To design and construct a moving bed stoker incinerator for incineration treatment of the domestic oil fly ash, operating condition and moving bed area of incinerator were determined by performing incinerate experiment of the oil fly ash in the muffle furnace which simulates moving bed stoker incinerator in all conditions. Incineration process of the oil fly ash could be divided into 3 stages, every stage needs the appropriate operating condition for effective incineration. The optimum content of water in the heavy oil fly ash was found to be 20 wt% to prevent the ash from flying and reduce the volume. Science combustion rate of oil fly ash depends on the oxygen content, the incinerator must have a equipment to control the oxygen content in the combustion air. The optimum temperature was $750{\sim}800^{\circ}C$ in order to prevent adhesion to the stocker and evaporation of metal compounds of low melting point. Uniform combustion reaction and acceleration of combustion rate required agitation during the combustion of oil fly ash. The incineration rate was $12.53kg/m^2hr$ and the working area of moving bed incinerator was found to be $60m^2$ to incinerate 18 tons of oil fly ash per day.

• Resources Recycling
• /
• v.4 no.3
• /
• pp.32-39
• /
• 1995

Thc purpose of this study is to develop the efficient process for recovering vanadium and nickel from the incineralionash of the oil fly ash. In this paper, the physical and chemical properties of the incineration ash was examined, and theleaching characteristics of the incineration ash were investigated by water leaching and sulEuric acid leaching tcsls. The incinerationash of oil fly ash was mainly consisted of oxldes such as V,09, V,O,, NaVO,, Ni,(VO,)Z, Fe,O,, CaSO,, SiO,.Thc waler leaching showed low extraction of metallic components, while the sulfunc acid lcaching with high temperahlreand pressure increased the extraction of vanadium and nickcl considerably. For instance, the exlraction rates of the metalllccomponents on the sulfuric acid leaching were 99% for V and 45% for Ni at 90$^{\circ}$C with pH 0.5 H,SO,, and were86% for V and 75% far Ni at ZOO"C(64 psi) with pH 1.0 H-SO,. with pH 1.0 H-SO,.

• Resources Recycling
• /
• v.21 no.5
• /
• pp.88-92
• /
• 2012

We tried to measure the fixed quantity of $Ni^{2+}$ion among the metals which were eluted by distilled water from the Fly Ash Leach Liquor(FALL) with a spectrophotometric method. In addition, we researched absorbance values which had different contained quantity of $V^{3+}$ion in contrast with $Ni^{2+}$ion ppm to find out the influence of the $V^{3+}$ion existed in the FALL on the spectrophotometric fixed quantity of $Ni^{2+}$ion. As a result, when $V^{3+}$ ion has below 50% of amount of $Ni^{2+}$ion, the fixed quantity of $Ni^{2+}$ion among the FALL was able to be confirmed by spectrophotometry.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 1993.04a
• /
• pp.1-23
• /
• 1993

중유회는 중유 화력발전소 보일러의 전지집진기에서 생성되는 분진으로 지금까지는 산업폐기물로 폐기되어 왔으나 이의 절대량이 증가하고 환경규제가 엄격하여짐에 따라 그대로 폐기할 수는 없게 되었다. 한편 이중에는 바나듐과 니켈 등의 유가금속이 3-10% 함유되어 있어 자원으로서의 가치가 충분하다. 이에 본 연구에서는 중유회로부터 바나듐과 니켈을 효과적으로 추출, 분리하여 재활용하기 위한 목적으로 바나듐과 오산화바나듐으로 니켈을 황산니켈로 각각 회수하는 방법에 관한 기초연구를 행하였다.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.65-72
• /
• 2016

We studied a selective recovery condition of vanadium (V) from FALL (Fly Ash Leach Liquor) produced at a fossil fuel power station using heavy oil. By applying a spectroscopy to quantify the V in a sample, we identified a concentration range V interfered by on presence of metals such as Ni, Fe Also, the optimal vanadium precipitation rate according to the amount of 5.0M $NH_3$ loaded to the sample, solution pH and stirring time. As a result of the experiment, the maximum selective recovery ratio of V was achieved to be higher than 91.5% when the stirring duration was less than 1 minute at pH 7.0, and $25^{\circ}C$.

• Clean Technology
• /
• v.16 no.1
• /
• pp.26-32
• /
• 2010

The low temperature pyrolysis of polypropylene (PP), polystyrene (PS) and polypropylene-polystyrene (PP-PS) mixture in a batch reactor at the atmospheric pressure and $450^{\circ}C$ was conducted to investigate the synergy effect of PP-PS mixture on the yield of pyrolytic oil. The pyrolysis time was varied from 20 to 80 mins. The products formed during pyrolysis were classified into gas, gasoline, kerosene, gas oil and heavy oil according to the petroleum product quality standard of Ministry of Knowledge Economy. The analysis of the product oils by GC/MS(Gas chromatography/Mass spectrometry) showed that new components were not detected by mixing of PP and PS. There was no synergy effect according to the mixing of PP and PS. Conversions and yields of PP-PS mixtures were linearly dependent on the mixing ratio of samples except for heavy oil yields. Heavy oil yields showed almost constant regardless of the mixing ratio.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1991.07a
• /
• pp.88-101
• /
• 1991

충주댐 및 소양강댐 유역에 대해 현재 한국수자원공사에서 개발 사용되고 있는 저류함수 유출모형에 최적화 기법을 적용하여 모형을 효율적으로 자동보정 하기위함이 본 연구의 목적이다. 최적화 기법으로는 다양한 조건하에서도 해의 안정성이 Gradient-Based 방법보다 우수한 직접 탐색법(Direct Search Method)의 하나인 Pattern-Search법으로 선정하였으며 목적함수로는 산정된 유출과 관측치의 편차의 제곱에 대한 누계치로 정의하였다. 합성유입량(Synthetic Inflow)을 이용한 민감도 분석에 의해 매개변수 5개(유역 저류상수 및 지체시간, 포화우량, 하도의 지체시간)를 결정변수로 선정하였다. 또한 실시간 모형의 보정을 위하여 최적화 모형의 수렴조건을 분석한 결과 P-S 법의 증분 감소횟수 2회가 합리적으로 나타났다. 본 모형을 충주댐 및 소양강댐의 과거 홍수사상에 대해 적용하였으며 댐지점에서 전체유역을 일괄 보정하는 방법과 댐 상류 수위국을 기준으로 나눈 중유역별로 일괄 보정하는 방법을 채택하여 분석하였다. 실시간 보정된 모형의 예측기능을 시험한 결과 상당한 오차발생의 여지가 충분하며 중유역별 매개변수의 보정은 대유역 일괄보정에 비해 예측에 따른 오차를 줄일 수 있는 방법의 하나이다. 또한 최적화 기법에 의한 매개변수의 자동 보정은 시행착오에 의한 수동보정의 경우보다 시간 및 노력면에서 효율적이며 보다 신뢰성 있는 보정을 실시 할 수 있다.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.328-333
• /
• 1998

To obtain basic information for establishing a pest control strategy for insect pest management system, changes in the population densities of the black-tipped sawfly(Acantholyda posticalis posticalis Matsumura) and damage patterns in tree growth were investigated in national forests in Hoigok-ri, Kapyung-gun, Kyunggi-do, where the pest control measures were taken. The results obtained were as follows ; 1. The larval density in the soil of the forests where the insecticides were applied have been kept below economic threshold for about 7 years. The density was the highest in the middle of slopes and similar to the level of the early stage of the insect outbreak. 2. After the pest control by insecticides, reduction in tree height and diameter growth lasted for 2-3 years in trees defoliated by over 70%. 3. The diameter growth of the trees damaged by black-tipped sawfly recovered faster in upper stem than in the lower. 4. volume growth of the trees defoliated over 70% by the insect decreased for three to four years. The volume loss of trees defoliated by 70% and 90% was 19.6% and 54.0%, respectively. 5. Maintaining the rate of defoliation below 50%, which is the economic threshold, by chemical control measures had an effect of reducing the tree volume loss by $40m^2/ha$ as compared with a stand defoliated by 90%.