• Economic and Environmental Geology
• /
• v.37 no.6 s.169
• /
• pp.613-629
• /
• 2004

Contamination of groundwater by volatile organic compounds (VOCs) was investigated for 168 groundwater wells in Ulsan area to study the natural attenuation of organic compounds in the aquifers. As groundwater contamination by VOCs is closely related to land use, 168 groundwater samples were classified into 4 different groups; agricultural, forestry, industrial, and residential & business. From analysis 65 out of 168 groundwater samples contained more than one VOC. Analysis of samples were performed fir 36 halogenated aliphatic hydrocarbons and 25 petroleum hydrocarbons set up by NAWQA of US geological survey. Twelve petroleum hydrocarbons were detected in 26 groundwater wells, but their concentrations were less than 1.5 g/L except for MTBE. Twenty three chlorinated aliphatic hydrocarbons, composed of 11 methanes, 6 ethanes and 6 ethenes, were detected in 63 groundwater samples. The range of methanes concentration was $ND\~330\;/gL,\;ethanes\;ND\~84\;gL$, and PCE and their derivatives $ND\~62\;g/L$. As the study area was comprised of the aerobic/denitrification zones and $Fe^{+3}$ redox condition, most of petroleum hydrocarbons were degraded well, while halogenated hydrocarbons were slowly biodegradation.

• Analytical Science and Technology
• /
• v.10 no.4
• /
• pp.264-273
• /
• 1997

Anodic oxidation reaction was applied to remove trihalomethanes in an aqueous solution. Each component was determined by using solid phase microextraction(SPME) fiber and GC-ECD. Anodic and cathodic compartments were separated in order to protect contaminants and connected by $KNO_3$-agar bridge. The calibration graphs of the 6 THM components were shown good linearlity from a few ppb up to a few hundreds ppb concentration level. Anodes such as platinum(Pt), titanium(Ti). zircornium(Zr), titanium metal coated with iridium(Ti-Ir), and glassy carbon coated with mixed valence ruthenium(mv Ru) were tried to remove the THMs at different potentials. The best result was obtained on the Ti-Ir anode applied 9 volts DC. The electrode could effectively remove almost all the THM components from the stirring solution within about 1.5 hours. The glassy carbon electrode coated with mixed valence ruthenium showed excellent removing effect at the begining, but the maximum removing level was remained at 60% probably due to the destruction of the electrode surface. The concentration of chloroform, however, tends to be increased due to the electrode reaction producing the component at the condition.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.4
• /
• pp.333-337
• /
• 2014

The purpose of this study is to develop a process technology to produce high hardness concentrated seawater removing chloride ions but containing useful minerals such as magnesium and calcium in the seawater desalination process. In order to make high hardness concentrated seawater, evaporation system is mostly used recently. Because evaporation system requires a large amount of energy consumption, in this study, it was aimed to produce high hardness concentrated seawater using membrane filtration requiring less energy. Nano filtration membranes were used for the experiments, and different types of high hardness concentrated seawater was produced depending on the membranes' specification, the number of times being concentrated, and pressure. As a result, at between 15bar and 20 bar in pressure, in between the second and the third times of concentration, the experiment result showed the best economic efficiency. By the experiment, production of high hardness concentrated seawater seemed to have a good economic feasibility.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.159-164
• /
• 1991

A field microplot(D 20cm, L 85cm) experiment filled with Bonryang sandy loam soil (Typic Udifluvents) was conducted to obtain quantitative information on the movement of applied nutrients under diffetent soil moisture regimes and ladino clover cultivation. Chloride moved rapidly with soil water. When soil moisture tension was maintained at loer than 0.2 bar most of the Cl appeared to move outside the microplot 4 month after the microplot installation. Regardless of soil moisture condition, Cl was not detected in the soil due to the fast movement of the Cl beyond the microplot after 5.5 months Although large amount of P and water were applied to the soil of high available P during the field experiment, movement of P was negligible and most of P remained in thc place where applied due to the low solubility of the fused and superphosphate. Phosphate in the soil extracted by Bray No.1 solution and taken up by plant increased with soil moisture. Under the condition of irrigation at 0.2 bar, plant took up 23% of the applied P, and 24% of the P was extracted by Bray NO.1 solution, while plant took up 14% and 13% of the P was turned out to be Bray No.1 P. at thc nonirrigated condition after final harvest.

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.540-549
• /
• 1999

The combustion temperature was controlled between $880^{\circ}C$ to $1070^{\circ}C$ to find the relation the combustion temperature and emission amount of PCDDs/PCDFs in the Municipal solid waste incinerator. The emission amount of PCDDs/PCDFs decreased when the temperature increased in the rear of the boiler. The PCDDs/PCDFs concentration were detected $7.82ng-TEQ/Nm^3$ at $880^{\circ}C$, $6.97ng-TEQ/Nm^3$ at $970^{\circ}C$ and $6.13ng-TEQ/Nm^3$ at $1070^{\circ}C$. Also, The chlorophenols, chlorobenzenes, and PCB concentration decreased by increasing the temperature from $880^{\circ}C$ to at $1070^{\circ}C$, and the isomer of the prescsors had a tendency to emit the higbly cbiorinated compounds.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.7
• /
• pp.371-376
• /
• 2016

In this study, the survey of bisphenol-A in indoor water service pipes rehabilitated with epoxy resin was conducted and the risk assessment was done to investigate the effect on the human health to drink tap water. Bisphenol-A in raw water was detected in a range of 50~118 ng/L in all samples, where the limit of quantification was 10 ng/L. This is caused by inflow of the sewage effluent or the tributaries of the surrounding area containing bisphenol-A. Bisphenol-A was not detected in finished water after the advanced water treatment process. It was achieved by its removal from the processes of flocculation-precipitation and oxidation of ozone and chlorine and by being changed to other by-product materials. For the indoor water service pipe, bisphenol-A was not detected in all cases which was not coated with epoxy resin. However, when epoxy resin is lined within the indoor water service pipe, bisphenol-A was identified at maximum level of 521 ng/L and was detected above the limit of quantitation at 68 percentages of all samples. The Hazard Quotient (HQ) at the maximum level (521 ng/L) of the detected bisphenol-A is 0.004, which is less than the reference value of 0.1 for the tap water intake. Therefore, it is considered that the detected levels of bisphenol-A in this study would be safe to drink tap water.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.422-431
• /
• 2001

One pulp manufacture facility was selected as surveying facility to examine the discharged amount and generation mechanism of dioxins excepts for bleaching stage wastewater. In recovery and finishing process, 2,3,7,8-TCDF, OCDD and OCDF were mainly detected, and the ratio of PCDDs and 1,2,3,4,7,8-HxCDD as the concentration of 2,3,7,8-substitute isomer were discharged which is known as the typical emission pattern of pulp and paper manufacture facility, and the 1,2,3,7,8-PeCDD and 1,2,3,4,7,8-HxCDD were discharged more than 90% in toxic equivalent concentration. Also, the OCDD and 2,3,7,8-TCDF for 2,3,7,8-isomer concentration, and 1,2,3,7,8-PeCDD and 2,3,7,8-TCDF as toxic equivalent concentration were discharged in effluent. The detected PCDDs/PCDFs concentration were surveyed 0.2266 ng-TEQ/L for influent and 0.0377 ng-TEQ/L for effluent.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.195-209
• /
• 2018

In this study, the characteristics of various raw hairs used for traditional Korean brushes were examined; further, the characteristics and deterioration patterns of Korean, Chinese, and Japanese brushes were compared, with a quantitative evaluation to assess the brush performance. The tensile strength was generally found to be higher with a greater fiber thickness. Among the hairs examined, the back and flank hair of goat was more damaged than that in other parts, and the tensile strength was low. Higher elasticity of the brush made with hair of high cysteine content was measured. Owing to deterioration by use of the brushes, artificial drying brushes had a higher yellowness index and lower tensile strength than natural drying brushes. Further, it was confirmed that brushes with good absorbency exhibited good consistency, but not good elasticity. Thus, the performance of the brush can be influenced by the kind of material used and the brush usage pattern. In addition, it is possible to identify the material science characteristics of brushes which have been produced only by experience; therefore, the results of this study could provide basic data for manufacturing brushes employed in conservation treatment, in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1035-1042
• /
• 2005

Granular Activated Carbon(GAC) is widely used in drinking water treatment. At S and B Water Treatment Plant, GAC is used in place of granular media in conventional rapid filters(GAC Filter-Adsorber) for removal of Disinfection By-products(DBPs). The primary focus of this study is on the performance of existing filter-adsorber, and their operation. It was found that F/A process removed turbidity as effective as sand system. The ratio of Hydrophobic DOM (HPO) and hydrophilic DOM (HPI) fraction in the raw water at S and B WTP was similar. Filter Adsorber presented earlier DOC breakthrough and steady state condition which was contributed by biodegradation during operation period. The removal efficiency of DBPs were used to evaluate the filter performance. The DBPs concentration of F/A treated water was below treatment goal level (THM < $80\;{\mu}g/L$, HAA < $60{\mu}g/L$). The removal efficiency of THM decreased rapidly during operation period. However, HAA were removed steadily regardless of the influent concentration of HAA. These results indicate that the removal of THM depend upon the adsorption mechanism while the removal of HAA depend upon biodegradation as well as adsorption. The decrease of adsorption capacity and characteristic value of GAC may be attributed to the effect of high organic loading, residual free chlorine, coagulants, manganese oxidants and frequently backwashing. This study has confirmed that Filter adsorber process can be considered as effective alternatives for the removal of DBPs, especially HAA.

• Korean Journal of Veterinary Research
• /
• v.17 no.2
• /
• pp.63-71
• /
• 1977

During the period of March, 1976 to December, 1976, 48 raw milk samples were taken from dairy cows at 48 different dairy farms in Korea analyzed by gas liquid chromatography to determine the seasonal variation of the amount of organochlorine pesticide residues. At the same time 80 market milk, 10 beef and 10 pork samples were analyed by the same procedure for checking residual levels. The results were summarized as follows; 1. Milk samples from 17 dairy farms (36 per cent of tatal) were shown to be contaminated with various organochlorine pesticides. The residua lrate of ${\gamma}-BHC$ in tested samples were 44per cent (14 sam ples) that of aldrine was 28 per cent (9 samples) and those of pp'-DDT, dieldrin and heptachlor were 9.3 percent (3 samples) respectively. 2. In raw milk pp'-DDT, ${\gamma}-BHC$, aldrin, dieldrin and heptachlor were detected, and aldrin, dieldrin and heptachlor were detected in the market milk. Any kinds of organochlorine pesticides were not detected in beef samples but dieldrin and heptachlor were detected in pork samples. Average residual values of aldrin, dieldrin and heptachlor in the market milk were 0.0077 ppm (0.0000~1.1100 ppm), 0.0001ppm (0.0000~0.0500 ppm) and 0.0008 ppm (0.0000~2.0520 ppm), respectively, and those of dieldrin and heptachlor in pork samples were 0.0010 ppm (0.0000~0.0100 ppm) and 0.0033 ppm (0.0000~0.0330 ppm). respectively. 3. Residues of organochlorine pesticides in raw milk were extremely variable; in fact pp'-DDT was detected in milk samples from A, B, C and D districts and endrin was not detected from all districts. The ${\gamma}-BHC$ and dieldrin were detected at the district of A, C and D, aldrin at the districts of A and C and heptachlor at the districts of both A and D. 4. Seasonal trends of residual values of organochlorine pesticides were, in general, noticeable. The residual level was much higher in Spring than in other seasons and showed the tendeney of decrease from spring through summer and autumn generally; in the case of pp'-DDT average residual values were 0.0121 ppm in spring, 0.0022 ppm in summer and not detected in autumn. But in winter ${\gamma}-BHC$ and aldrin residues were increased a little. Residual values in raw milk (when cow are fed on hay and silage) were appeared higher in winter than the other seasons. 5. Residues of organochlorine pesticides in raw milk were not related in respect to hygienic conditions of dairy farms pp'-DDT and heptachlor were, in general, detected in all farms and aldrin was more detected in milk from well sanitated farms than poor sanitated ones.