• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.417-423
• /
• 2006

A series of amine functionalized MCM-41 catalysts were prepared by aminopropyltrimethoxysilane grafting and their catalytic performance in Knoevenagel reaction of selected substrates was investigated. Water resistant and catalytically active amine grafted MCM-41 was prepared by post-synthetic silylation using methyltrimethoxysilane ; hydrogen bonding of the water molecules formed during the condensation reaction to the active N group was suppressed, which led to high TON of the reaction. Amine functionalized MCM-41 prepared by coating method produced high conversion, but the TON of the catalyst was much lower than that of the amine grafted MCM-41; pore volume of the functionalized MCM-41 decreased substantially and large portion of the immobilized amine is believed to be hydrogen bonded to each other, which can result in decrease in the basicity of the N group. A secondary amine group was prepared by room temperature condensation between aminopropylsilane and chloropropylsilane, and the MCM-41 grafted with the secondary amine group demonstrated the highest catalytic activity among the catalysts prepared.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.12
• /
• pp.15-20
• /
• 1972

There are still many problems on the physiological role of silicon in rice plants, although, it has been reported that silicate slag is the most effective fertilizer for the improvement of Akiochi soils. This experiment is carried out to investigate the effect of silicate of the mineral nutrition uptake by rice plants, using Ca45, P32, C136, and Mn54. The obtained results are summerized as follows; 1. Contents of mineral nutrients except silicon were higher in the rice plant grown in minus Si-culture solution a than in plus Si-plot. 2. Transpiration amounts appeared to be greater in the low content plant of silicon. 3. The rate of translocation to shoot of each ion absorbed by roots depended on the rate of transpiration. 4. It seemed that only CI uptake was found small in minus Si-root. 5. Silicate fetilizer did not affect the solubility of mineral ions in soils.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.151-151
• /
• 2003

토양에 방치된 농업용 폐비닐은 거의 분해가 되지 않으며, 수분과 공기의 유통을 차단하고 토양 내 미생물들의 흐름을 막아 토양을 더욱 황폐화시키게 된다. 불법적인 소각 때는 산불의 위험에다 다이옥신, 염소 및 염화수소가스 등을 배출해 대기오염을 유발시킨다. 폐비닐을 열분해과정으로 처리하여 아주 작은 입자로 미분쇄하고 겔상태로 용융된 원료물질속으로 완전히 균일하게 혼합하여 골재로 활용하는 과정에서 가스상과 액상의 여러 가지 중간생성물질이 발생하게 되며, 농약의 살포에 의한 잔류농약 둥 인체에 유해가능한 요소들이 있을 수 있다. 본 연구에서는 개발공정이나 제품에서 인체에 영향을 미칠 수 있는 물질에 대하여 유해성을 평가하고 용응 겔 및 가스와 오일에 함유된 화학성분을 분석하였기에 보고하고자 한다 시험동물의 혈액생화학적 검사에서는 농업용 폐비닐물질 및 열분해 파생물질의 혈청 Cholesterol, 혈청 Alanine aminotranseferse와 Aspartate aminotransferse, Albumin 수치, LDH, Glucose, Uric acid, A/C 비 등의 생화학적 활성도를 측정한 결과들에서는 농업용 폐비닐물질을 투여한 시험군에서 나타난 결과와 비교하여 열분해 파생물질을 투여한 시험군에서 나타난 결과가 감소된 통계결과를 보였다. 이 결과들은 농업용 폐비닐물질을 투여한 시험군보다 열분해 파생물질을 투여한 시험군의 외부독성물질 투여에 의한 생체독성의 영향과 생체에 가해진 스트레스강도가 작았음을 의미하는 것이다. 잔류농약분석에서는 시료로부터 농약을 추출하는 용매추출과정, 시료추출물 중 공존하는 방해성분을 제거하는 정제과정, 폐비닐물질 및 열분해 파생물질 성분을 100mg/kg 이상군의 투여 후 시험동물의 부검시 모든 투여군에서 독성소견이 인정되지 않았다. 이와 같은 결과로 열분해 및 연소과정에서 발생하는 파생물질의 분석결과를 응용하여 대기오염을 방지하고 인체 유해물질을 차단하는 공해 방지 설계의 기초자료를 제안하고자 한다.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.2
• /
• pp.137-143
• /
• 2016

This study was conducted to investigate the electrolyte metabolic responses to a 100 km ultra-marathon in 22 male amateur runners. Their average age was $50.91{\pm}4.77$ years old and their $VO_2max$ value was $48.19{\pm}6.4 mL/kg/min$. The participants completed the race with a mean finishing time of $205.55{\pm}19.61$ minute. Electrolyte parameters based on blood tests including calcium, inorganic phosphorus, magnesium, sodium, potassium, chloride, total carbon dioxide, anion gap, plasma volume change and osmolality were measured pre-race, at 50 km, and at 100 km (post-race). Only slight changes in sodium level with no cases of hypernatremia or hyponatremia were observed. Additionally, all the electrolyte parameters changes were within the normal range and plasma volumes were unchanged. Overall, amateur marathon runners are not at risk to develop clinically significant electrolyte or osmolality changes during a 100 km ultra-marathon.

• Journal of Applied Biological Chemistry
• /
• v.54 no.3
• /
• pp.218-224
• /
• 2011

This study was conducted to estimate the water quality of agricultural groundwater well located in Buan-gun, Jinan-gun, Sunchang-gun, and Jangsu-gun of Jeollabuk-do. The groundwater samples were collected at 328 sites (Buan-gun: 158, Jansu-gun: 45, Sunchang-gun: 32, Jinan-gun: 93, respectively). We measured 4 kinds of general contaminants (pH, $NO_3-N$, $Cl^-$, and COD) and 10 kinds of specific contaminants (Cd, As, $CN^-$, Hg, phenol, Pb, $Cr^{+6}$, organophosphorus, trichloroethylene, and tetrachloroethylene). Generally, the level of general contaminants and specific contaminants in the agricultural groundwater was suitable for water quality standard in all sites for agricultural irrigation water. Exceptionally, chloride concentrations were exceeded water quality standard of agricultural groundwater at some sites in western coast area of Jeollabuk-do. Although water quality standards in agricultural groundwater have been suitable, the water contaminants of agricultural groundwater in western coast area were gradually increased than eastern mountain area.

• Journal of Korea Water Resources Association
• /
• v.47 no.3
• /
• pp.237-245
• /
• 2014

Volcanic ash components of Mt. Baekdu were estimated to response the change of water quality environment affected by Mt. Baekdu volcanic ash ejected during eruption. Then the change of water concentrations according to the sedimentation of volcanic ash components were analysed. To estimate volcanic ash components of Mt. Baekdu, similar volcanos were selected through the comparison of main foreign volcano's magma type and the selected volcanic ash components supposed as Baekdu Mountain's. To analyse the change of water concentrations, the change of harmful components affected by volcanic ash sedimentation were analysed and the results were compared with domestic drinking water quality standard. As the result, Al, Cd, F, Fe, Pb, Mg, Cl and Sr could affect to water quality. Among those components, concentrations of Cd, F, Fe, Pb and Mg were estimated to exceed the drinking water quality standard.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.165-171
• /
• 2009

Resins were synthesized by mixing 1-aza-15-crown-5 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous materials) and divinylbenzene (DVB) copolymer with crosslinkage of 1%, 2%, 8%, and 16% by substitution reaction. The characteristic of these resins was confirmed by content of chlorine, element analysis, thermogravimetric analysis (TGA), surface area (BET), and IR-spectroscopy. The effects of pH, time, dielectric constant of solvent and crosslinkage on adsorption of metal ion by the synthetic resin adsorbent were investigated. The metal ion showed a fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in an increasing order of uranium $(UO_2^{2+})$ > lead $(Pb^{2+})$ > chromium $(Cr^{3+})$ ion. The adsorption was in the order of 1%, 2%, 8%, and 16% crosslinkage resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.112-112
• /
• 2018

알루미늄 합금은 내구성과 내식성이 우수한 경량 재료이다. 그 중 Al-Mg계 5083 Al 합금은 가공성 및 용접성이 우수하여 선체 재료로 널리 이용되고 있다. 이는 선체 중량의 경량화로 인해, 연료비 절감과 빠른 선속 등 다양한 이점을 지니기 때문이다. 그러나 선박의 고속화에 따라 선체에 가해지는 유체충격이 증가하고, 압력 저하에 기인하여 캐비테이션-침식 손상이 증가할 뿐만 아니라, 염소이온이 존재하는 해수환경에서는 침식과 부식의 시너지효과로 인하여 재료의 손상이 더욱 가속화된다. 이에 대한 다양한 방지책들이 제안되고 있으나, 강한 충격압을 동반한 캐비테이션 침식-부식 복합 손상 환경에서는 다소 한계가 있다. 따라서 본 연구에서는 알루미늄 5083에 대하여 캐비테이션 환경 하에서 일정 전위를 인가하며 침식-부식 손상이 최소화 되는 전위 구간을 규명하고자 하였다. 먼저, 분극 실험을 선행하여 재료의 전기화학적 거동을 파악 한 후 적용 전위구간을 선정하여, 해당 전위를 인가한 상태에서 캐비테이션 실험을 실시하였다. 전기화학적 분극실험과 캐비테이션-전기화학 복합 실험은 $25^{\circ}C$의 해수 하에서 실시하였으며, 시험편의 노출면적은 $3.24cm^2$으로 하였다. 분극 실험은 개로전위로부터 +3 V까지 2 mV/s의 분극속도로 전위를 인가하였고, 기준전극으로 Ag/AgCl, 대극으로 백금전극을 사용하였다. 캐비테이션-전기화학 복합 실험은 정전위를 인가한 상태에서 대향형 진동법으로 진동수 20 kHz, 진폭 $30{\mu}m$ 진동을 20분간 가하였으며, 혼팁과 시험편 사이의 거리는 1 mm로 일정하게 유지하였다. 실험 후 표면 손상의 정량적 분석을 위해 인가된 전위별 전류밀도를 비교하고, 무게감소량을 측정하였으며, 손상경향 파악을 위하여 3D광학현미경과 주사전자현미경(SEM)을 통해 표면을 분석하였다.

• Journal of the Korean Geographical Society
• /
• v.45 no.5
• /
• pp.553-572
• /
• 2010

Grain size analysis of sediments and soils has been regarded as a one of the most important analytical methods in Earth Sciences. The results of grain size analysis by 10 different pretreatment procedures in loess-paleosol sediments are compared in the study. In spite of the most powerful effectiveness of dispersant(sodium hexametaphosphate) on the dispersions of sediments, the effects show large differences by its treatment orders with HCl. It may result from that $Na^+$ ions in the dispersant may not be able to effectively substitute $Ca^{2+}$ ions in the sediments due to the electrostatic forces between $Na^+$ and $Cl^-$ ions in the dispersant and HCl, respectively. Although $H_2O_2$ and HCl are more effective in dispersion than hot water, they do not affect greatly the dispersions. Therefore, the reliable results of grain size analysis can be obtained by selecting the adequate pretreatment procedures most suitable for the purposes of researches and characteristics of sediments.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.86-92
• /
• 2017

A process, which converts carbon dioxide contained in the flue gas of coal-fired power plants to sodium bicarbonate, was studied experimentally and numerically. In this process, the carbon dioxide reacts with sodium hydroxide which is produced through saline water electrolysis. A bench scale reactor system was prepared for experiments of this process and numerical process modeling was performed for the bench scale reactor system. Comparing the process modeling results with the experimental data, responsibility of the process modeling was confirmed. Using this model, commercial scale process was simulated. Mass and energy balance of this process were calculated. Temperature profile in the reactor and carbon dioxide removal rate were obtained.