• Title/Summary/Keyword: 중앙대

Search Result 1,093, Processing Time 0.023 seconds

A Numerical Study of the Combustion Characteristics in a MILD Combustor with the Change of the Fuel and Air Nozzle Position and Air Mass Flow Rate (연료 및 공기 노즐 위치와 공기 유량 변화에 따른 MILD 연소 특성에 관한 해석적 연구)

  • Kim, Tae-Kwon;Shim, Sung-Hoon;Chang, Huyk-Sang;Ha, Ji-Soo
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.33 no.5
    • /
    • pp.325-331
    • /
    • 2011
  • A numerical analysis of reactive flow in a MILD(Moderate and Intense Low oxygen Dilution) combustor is accomplished to elucidate the characteristics of combustion phenomena in the furnace with the change of fuel and air nozzle position and air mass flow rate. For the case with the fuel nozzle located near center position of combustor, the reaction zone started at the fuel nozzle and had inclined shape toward combustor wall when the air mass flow rate was relatively smaller. On the other hand, the end of reaction zone moved toward center of combustor from combustor wall when the air flow rate was relatively larger. For the case with the air nozzle located near center position of combustor, the reaction zone started at the fuel nozzle and had inclined shape toward combustor wall when the air mass flow rate was relatively small, which was similar as the previous case with smaller air mass flow rate. On the other hand, the end of reaction zone moved toward combustor wall when the air flow rate was relatively larger. The maximum temperature increased as the air mass flow rate increasing for both cases, and the concentration of thermal NOx increased also from the previous reason of temperature characteristics. The concentration of NOx for the case with the air nozzle located near center position of combustor was considerably smaller than that for the case with the fuel nozzle located near center position of combustor. From the present study, the case with the air nozzle located near center position of combustor and theoretical air flow rate was the most effective condition for the NOx reduction and perfect combustion.

THE HANKOOK-SAENGYARK BO (한국생약보-제266호)

  • Korea Medicine Herbal
    • The Hankook-Saengyark Bo
    • /
    • no.266
    • /
    • pp.1-8
    • /
    • 2006
  • GAP인증약재 고품질 브랜드로 차별화/약용작물 GAP 인증사업 본격 착수/수급조절대상한약재 14종으로 축소/엄경섭 회장 제 14대 회장에 재선/GAP 농산물 이력추적관리제 워크숍/홍천군 생명.건강연구장비센터 완공/'동의보감타워' 개장/인삼, 다양한 포장단위로 판매 가능/인증품의 차별화로 '신뢰쌓기' 급선무/나는 이렇게 생각한다-"국산한약재 그리고 GAP/'광범위계 농약' 예방 목적으로 사용해야/경남도농업기술원 시험/백두대간 청정지역에서 GAP 오미자 재배/생강 인공토굴 저장 부패율 3%/4년간 인삼 직파재배용 차광망 선발/일당귀 소비증가 시세도 토당귀 '두배'/씀바귀, 암 예방 보약/함양산삼축제/감초로 스트레스성 속쓰림 방지/한약재 4가지+빵 '한약웰빙빵' 나왔다/"옻음료, 약국서 찾으세요"/GAP재배지 입간판 설치/허브산업 육성 업무제휴 협약서 체결/사무국 회무일지/제 113차 중앙이사회 이모저모/14대 임원진 명단/약초이야기-구릿대(백지)/국산한약재-소매시세표

  • PDF

Serving Reliable Resource Discovery in Grid Environment using a Chord (대규모 그리드 환경에서 Chord을 이용한 신뢰성 있는 자원 탐색방법에 관한 연구)

  • Jeong, In-Cheol;Ham, Ho-Sang
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2003.05a
    • /
    • pp.129-132
    • /
    • 2003
  • 그리드와 같은 대규모 컴퓨팅 자원이 연결되어 이용되는 분산처리 환경에서 가장 중요한 기능중에 하나가 자원 탐색(lookup)기능이다. 찾기 기능은 미리 정해진 형태로 지원을 등록하고 이 정보를 중앙에서 관리하는 단일기관이나 소규모로 분산된 컴퓨팅 자원을 공유하는 환경에서는 문제되지 않는다. 그러나 임의로 가입과 탈퇴가 가능하고 대규모로 자원이 연결된 그리드 환경에서는 빠른 자원 탐색이 성능의 기본 요소가 된다. 이 논문에서 그리드 환경에서 자원탐색 방법으로 분산형 자원탐색 방법인 Chord시스템을 이용하고 자원탐색방법을 신뢰성 있게 유지하기 위해 메시지큐를 이용하여 시스템을 모델링하고 시스템을 설계한 내용을 기술하였다. 이를 위하여 Chord시스템에 Message Queue System을 통합하여 응용 프로그램에서 요청한 자원탐색을 메시지 큐에 저장하여 노드가 failure되거나 네트워크가 분할이 되더라도 메시지 큐에 저장된 내용을 바탕으로 일관성을 유지할 수 있는 방법을 제시하였다.

  • PDF

전자투표 사업 현황 및 사례 분석

  • 강신범;정현철
    • Review of KIISC
    • /
    • v.15 no.5
    • /
    • pp.52-66
    • /
    • 2005
  • IT 강국이라는 명성과는 사뭇 거리가 멀었던 우리나라의 투표 인프라에 혁명적인 변화를 일으킬 전자투표 실시가 다가오고 있다. 60년간 유지되어 오던 종이투표의 시대가 이제 18대 총선부터 전면 도입키로 한 전자투표로 인해 막을 내릴 전망이다. 외국의 경우 미국이 2002년 터치스크린 방식의 전자투표기를 도입해 지난해 대선에서는 대부분의 주에서 전자투표를 실시했고, 일본도 2002년 지방선거때 43개 투표소에 터치스크린 방식의 전자투표기 113대를 설치했다. 영국에서는 2002년 지방선거에서 휴대전화 문자메시지와 디지털 TV를 통한 투표를 실험적으로 실시한 바 있다. 우리나라는 지난 90년대부터 전자투표시스템에 대한 연구를 시작했다. 실제 선거에서 활용된 적은 없었지만 선관위는 지난 98년에 버튼식 전자투표기를, 2001년에는 터치스크린 방식의 전자투표기를 개발했다. 현행 선거법 278조에도 '중앙선관위는 투표 및 개표, 기타 선거사무의 정확하고 신속한 관리를 위해 사무전산화를 추진해야 한다'라는 규정과 '투표 사무처리 전산화의 실시여부는 국회 교섭단체와 협의해 결정한다'는 규정이 있어 전자투표 실시에 대한 법적인 근거가 마련돼 있는 상태다. 다가오는 전자투표 시대를 맞아 이미 새로운 투표 인프라를 구축하여 전자투표를 실시하는 해외사례를 분석하고 향후 우리나라 전자투표 사업의 성공을 위한 문제점들을 고찰해 본다.

Assessment of Tunnel Displacement with Weak Zone Orientation using 3-D Numerical Analysis (3차원 수치해석을 이용한 연약대 방향에 따른 터널 거동 특성 평가)

  • Yim, Sung-Bin;Jeong, Hae-Geun;Seo, Yong-Seok
    • The Journal of Engineering Geology
    • /
    • v.19 no.1
    • /
    • pp.43-50
    • /
    • 2009
  • A 3-D numerical analysis was carried out to observe potential effects of orientation of inherent weak zones to tunnel behaviors and stress distributions during tunnel excavation. Weak zones used for the analysis were placed at the upper 1D part from crown, on the crown and on the center of face, using orientations derived from the 6th RMR parameter for assessment of joint orientation effect on tunnel. Mechanical properties of rock mass were derived through a in-situ displacement measurement-based back analysis. Finally, a classification chart for crown settlement with five ranks based on orientation and location of weak zones is suggested.

Effects of tube-support parameters on damping of heat exchanger tubes in liquids (튜브지지대 인자가 열교환기 튜브의 감쇠에 미치는 영향)

  • 김범식
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.12 no.5
    • /
    • pp.1003-1015
    • /
    • 1988
  • Damping information is required to analyse heat exchangers for flow-induced vibration. The most important energy dissipation mechanisms in heat exchanger tubes are related to the dynamic interaction between tube and support. In liquids, squeeze-film damping is dominat. Simple experiments were carried out of a two-span tube with one intermediate support to investigate the effects of tube-support parameters, such as: tube-support thickness, diametral clearance, tube eccentricity, tube span length, location of tube-support, and nature of dynamic interaction between tube and tube-support. The results show that squeeze-film damping is much larger for lateral-type motion than for rocking-type motion at the support. Eccentricity was found to be very important. Diametral clearance, support thickness and frequency are also very relevant. The effects of these parameters on squeeze-film damping are formulated and proposed in a semi-empirical expression.

Mineralization and Genetic Environments of the Central and Main Orebodies in the Manjang Deposit, Goesan (만장광상 중앙광체와 본광체의 광화작용과 생성환경)

  • Yu, Hyunmin;Shin, Dongbok
    • Journal of the Mineralogical Society of Korea
    • /
    • v.31 no.2
    • /
    • pp.87-101
    • /
    • 2018
  • The Manjang deposit developed in the Hwajeonri formation of the Okcheon metamorphic belt consists of the Central and Main orebodies of Cu-bearing hydrothermal vein type and the Western orebody of Fe-skarn type. This study focuses on the Cu mineralization of the Central and Main orebodies to compare with the genetic environments of the Western orebody previously studied. The Central orebody produced pyrrhotite and chalcopyrite as major ore minerals with vein texture, while the Main orebody contains pyrite, arsenopyrite, and chalcopyrite as major ore minerals with vein, massive, and brecciated texture. Sphalerite, galena, magnetite, ilmenite, rutile, cassiterite, wolframite, and stannite are also accompanied. Local occurrence of skarn is dominated by grossular and hedenbergite, reflecting the reduced condition of the skarnization. Geothermometries of sphalerite-stannite in the Central orebody and arsenopyrite-pyrite in the Main orebody indicate the formation temperature of $204-263^{\circ}C$ and $383-415^{\circ}C$, respectively. Sulfur fugacity of $10^{-6}-10^{-7}atm$. in the Main orebody decreased toward the Central orebody. Sulfur isotope compositions of sulfide minerals from the Central and Main orebodies are 4.6-7.9‰ and 4.3-7.0‰, respectively, reflecting magmatic origin with slight influence by host rock. Considering ore mineralogy, texture as well as physicochemical conditions, the Main and Central orebodies of hydrothermal Cu mineralization reflect the characteristics of proximal and distal type ore mineralization, respectively, related to hidden igneous rocks, and they were generated under different hydrothermal systems from the Fe-skarn Western orebody.

The Characteristics of Recurrence on Intervention Cases of Child Protective Services: Application of Survival Analysis (아동보호서비스 개입사례의 재학대 특성 연구: 생존분석의 적용)

  • Jang, Hee Sun;Kim, Ki Hyun;Kim, Kyung Hee
    • Korean Journal of Family Social Work
    • /
    • no.54
    • /
    • pp.225-262
    • /
    • 2016
  • This article reports on the analysis of the patterns and frequency of recurrences of substantiated instances of maltreatment in the Child Protective System (CPS). The data was collected from 2012 to 2014 by the CPS. Five-thousand-five-hundred-forty-two cases were substantiated in 2012 and then 323 cases were exposed recurrence during that time. Most recurrence families experienced only one recurrence. Results from survival analyses instances indicated that risk of recurrence was greatest during the first one month following a report. The prior CPS report, multiple type of abuse, physical abuse, and services type was linked the pattern of recurrence of maltreatment. Also, victim's age and the number of problematic behavior, perpetrator's stress and social isolation, intra family member as perpetrator, prior CPS report, and the number of reports was linked recurrence.

정책토론회 - 건축설계의 국제경쟁력 확보와 전문화 방안

  • Korea Institute of Registered Architects
    • Korean Architects
    • /
    • no.12 s.332
    • /
    • pp.34-42
    • /
    • 1996
  • 우리 협회는 지난 11월 26일 오후 2시 협회 대강당에서 '건축설계의 국제경쟁력 확보 및 전문화 방안'을 주제로 토론회를 개최하였다. WTO출범과 건축설계시장개방 등 급격한 대내ㆍ외적 환경변화에 처해 있는 우리 건축계의 국제경쟁력 확보 방안을 마련하기 위해 열린 이날 토론회에서는 경쟁력 확보를 위해 건축설계사무소마다 다양한 전문분야를 확보하고, 건축설계 생산성 향상을 위해 설계업계와 구조, 설비 등 관련 전문분야가 협력체제를 구축해야 하며, 건축의 상품성과 문화예술성이 함께 고려된 건설관련 법안이 마련돼야 한다는 주장이 제기됐다. 이날 서울시립대 최찬환교수는 '건축설계의 경쟁력 확보 방안'이란 주제발표를 통해 해외건설업계의 국내진출에 대응하기 위해서는 설계사무소가 전문성과 효율성을 확보해야 한다고 강조하면서 전문영역을 크게 주거, 상업시설, 공공시설, 교육문화시설, 사회복지시설, 교통 및 운수시설 등으로 구분하였다. 최교수는 또 외국업체에 의한 국내시장 잠식을 막고 우리가 해외에 진출하기 위해서는 해외건설업체와 협력해 정보와 기술, 경험 등을 지원받아야 하고 R&D에 대한 투자를 적극적으로 해야한다고 강조했다. 이어 '건축설계의 전문화'에 대해 주제발표를 한 강원대 박경립 교수는 국내 건설관련문제점 개선과 대외경쟁력 강화를 위해 현재 입법추진되고 있는 건설산업기본법이 건축설계의 독자성과 전문성을 고려하지 않고 있다고 지적하면서 이에 대한 보완필요성을 제기하였다. 박교수는 또한 건축설계분야가 갖고 있는 전문성과 함께 '건축문화'라는 사회문화적 측면의 중요성이 인식돼야 한다며 건축의 상품성과 문화예술성이 함께 고려된 건설관련 법안이 마련돼야 한다고 지적했다. 박교수는 이밖에도 사회발전에 따른 새로운 전문영역의 개발로 실내 설계와 도시설계를 예로 들었으며 정보화에 맞게 고도의 전문성을 바탕으로 Network체계를 구축하고 그 핵심은 건축사협회에 정보Network를 구축하여 활용하는 것이라고 제안했다. 한편 주제발표 후에는 약 3시간여에 걸쳐 이문보(동국대 교수), 손세관(중앙대 교수), 이병담(현대산업개발 부사장), 김인호(국방부 건설기술과장), 유경철(삼육건축사사무소 대표), 이관영(본 협회 이사)씨 등 건설ㆍ건축관계자들이 참가한 종합토론이 이어졌다. 이 자리에서는 사회의 인식에 앞서 건축계 내부적으로 전문성과 효율성의 확보에 나서야 한다는 의견과 함께 무한경쟁속에서 우리 건축설계의 경쟁력을 높일 수 있다는 다양한 의견들이 제기되었다. 본지에서는 이번 토론회의 주제발표 내용을 요약 정리하여 게재한다.

  • PDF

Time Series Coastline Change Analysis of Haeundae Beach (해운대 해안의 시기별 해안선 변화량 분석)

  • Lee, Jae One;Kim, Yong Suk;Lee, In Soo
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.5D
    • /
    • pp.655-662
    • /
    • 2009
  • The monitoring for analyzing coastline variations throughout many years is conducted in this study. Haeundae Beach is selected as a test area. We have collected RTK-GPS survey data, airborne LiDAR survey data from Sept. 2008 to 2005. We've done airborne LiDAR survey 2009 to 2006 and we would analyze coastline changes time series through interactive comparison analysis. The mean coastline distance of Haeundae shore is 1,347m (RTK-GPS) by airborne LiDAR survey (2 times). Coastline distance is decreased approximately 4.5% than mean distance in the November survey of 2008. We know right and left sides of the coastline are eroded and the center section shows us the littoral deposit of 3~7m toward sea. It turns out that the sand both sides is transported to the center section by a wave and tide and we know the coastline distance is getting smaller but the coastline width is getting longer like 2~7m.