• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.109-119
• /
• 2017

In the present study, to determine walking imbalance using the walking analysis method, where limitations in the existing walking analysis have been minimized, we propose a new walking analysis method that adopts the following: self-developed equipment to measure the angles of left-right hip joints and knee joints; a determination system using symmetry index (SI); and dynamic time warping (DTW) similarity analysis algorithm to analyze individual walking styles. Normal and imbalanced walking tests were conducted for 12 subjects without walking disorder. From the SI calculation to determine imbalanced walking, both the normal and imbalanced walking styles can be determined using the angle measurements of the left-right hip joints and knee joints. In the analysis of the individual walking styles, the similarities at the center of the lower back, left-right thighs, and dorsum of the feet of the 12 subjects in both normal and imbalanced walking cases were compared. From the similarity analysis of the measured values during the normal and imbalanced walking tests, I determined that the walking pattern does not maintain the same stance when the body parts move during walking.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.26-37
• /
• 2016

The core technologies of the current transport network are OAM and protection switching to meet the sub-50ms protection switching time via a path redundancy when a link or node failure occurs. The transport networks owned by public network operators, central/local governments, and major enterprises are individually configured and managed with service resiliency in each own protected sub-network. When such networks are cascaded, it is also important to provide a node resiliency between two protected sub-networks. However, the linear protection switching in packet transport networks, such as MPLS-TP and Carrier Ethernet, does not define a solution of dual node interconnection. Although Ethernet ring protection switching covers the dual node interconnection scheme, a large amount of duplicated data frames may be flooded when a failure occurs on an adjacent (sub) ring. In this paper, we suggest a dual node interconnection scheme with linear protection switching technology in multiple protected sub-networks. And we investigate how various protected sub-network combinations with a proposed linear or ring protection process impact the service resiliency of multiple protected sub-networks through extensive experiments on link and interconnected node failures.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.127-136
• /
• 2007

It is easy to install and maintain a mobile multi-hop wireless network due to its self-organizing characteristics. However it has security weakness of the authentication of mobile multi-hop relay stations. Specially, the mobile multi-hop relay network in the IEEE 802.16j has the additional security weakness caused by the requirement of backward compatibility for mobile stations of the conventional IEEE 802.16 system. In this paper, we propose a novel mutual authentication scheme applicable to IEEE 802.16j-based mobile multi-hop relay network architecture. The scheme is able to resolve the initial trust gain problem of a multi-hop node at its entry to the network, the problem of rogue mobile multi-hop node and the problem of hop-by-hop authentication between multi-hop nodes. Effectively, the scheme is a hybrid scheme of the distributed authentication method and the centralized authentication method which have been considered to be deployed in the wireless ad-hoc network and the wireless network connected to wired authentication servers, respectively. Also, we analyze the effectiveness of the proposed hybrid authentication method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.2 s.54
• /
• pp.95-104
• /
• 2007

Three types of high-rise RC building structures having irregularity in the lower two stories were selected as prototypes and were performed nonlinear static analysis by using OpenSees to verify the analysis technique and to investigate the seismic capacity of those buildings. The first one has a symmetrical moment resisting frame (Model 1), the second has an infilled shear wall in the central frame (Model 2), and the third has an infilled shear wall only in one of exterior frames (Model 3). Fiber model, which consists of concrete and reinforcing bar represented from stress-strain relationship, is adapted used for simulate the nonlinearity of members, and MVLEM(Multi vertical linear element model) is used for simulate the behavior of wall. The analytical results are simulate the behavior of piloti stories well, for example, the stiffness and yield farce of piloti stories, the up-lift of wall and the variation of lateral stiffness of column due to the variation of axial forces. Overstrength of Model 2 and Model 3 are about 2 times larger than that of Model 1. The reason of the high oversttrength and ductility of Model 2 and Model 3 is that the conservative design of Model 2 and Model 3, whose beam and column sections are the same as those of Model 1. The ductilities of Model 1 and Model 3 are slightly larger than that of Model 1 and Model 3. Model 1 and Model 3 reached mechanism condition, whereas Model 2 failed to the shear failure of shear wall and the large axial forces in columns due to large overturning moment.

• Korean Journal of Plant Taxonomy
• /
• v.32 no.4
• /
• pp.467-480
• /
• 2002

The development of the female gametophyte of Corydalis albipetala, C. ambigua, C. filistipes, C. nobilis, C. solida, C. ophiocarpa have been comparatively investigated using laser scanning confocal microscope (LSCM) and light microscope. An archesporium was originated from one of the outmost parietal cells beneath the one-layered epidermis of protuberant nucellus, and acted directly as a megaspore mother cell (MMC). These species had linear tetrads after successional meiotic division during the megasprogenesis. A functional megasprore developed from one of the tetrad in the chalazal end, and the rest three being degenerated. The developmental type of the female gametophyte was monosporic in accordance with the Polygonum type. Prior to anthesis the female gametophyte was organized. So mature embryo sac was comprised a three-celled egg apparatus, three large antipodals were developed from the apex of each antipodal cell, and extended toward micropylar end to be contacted with egg apparatus. Two synergids were usually observed as degenerated condition, and in this time the apices of antipodal haustoria were connected with the degenerated synergids. The developmental characteristics of seven-nucleate female gametophytes were common in all the species investigated. But the shape of mature embryo sac was ovoidal in C. albipetala, C. filistipes, C. ophiocarpa and C. solida, reflexed in C. ambigua, and rather flattened ovoidal in C. nobilis. Also, the type of megasporangium was anatropous in all the species except C. ambigua with campylotropous ovule.

• Parasites, Hosts and Diseases
• /
• v.36 no.4
• /
• pp.217-225
• /
• 1998

A scanning electron microscopic study was performed to observe surface ultrastructures of excysted metacercariae and adults of Metagonimus miyatai. Metacercariae were collected from the scale of the pale chub (Zacco platypus). and adult flukes were harvested 1-4 weeks after infection to rats. In excysted metacercariae, the oral sucker was devoid of tegumental spines and had type I and type II sensory papillae. Anteriorly to the ventral sucker, spines were dense and digitated into 5-7 points, whereas near the posterior end of the body spines were sparse and digitated into 2-3 points. In one-week adults, 7 type II sensory papillae were arranged around the lip of the oral sucker. and at inner side of the lip one pair of small and two pairs of large type I sensory papillae were seen on each side. The distribution of tegumental spines was similar to that of metacercariae, but they were more differentiated with 9-11 pointed tips. In two- to four- week old adults, the surface ultrastructure was nearly the same as in one-week old adults, however, sperms were frequently seen entering into the Laurer＇s canal. Conclusively, the surface ultrastructure of M. miyatai was generally similar to that of M. yokogawai, however, differentiation of tegumental spines and distribution of sensory papillae around the oral sucker were different between the two species. which may be of taxonomic significance.

• Journal of Food Hygiene and Safety
• /
• v.15 no.2
• /
• pp.68-78
• /
• 2000

In Korea, food balance sheet and national nutrition survey have been conducted in parallel by Central Government for several decades. However, the gap between the two statistics became larger to reach an intolerable level in recent years, likely due to the limitation of dietary survey method in spite of the drastic change in dietary habits after industrialization and urbanization during last three decades. The currently available data from national nutrition survey was optimized by taking in to account of the food balance sheet. Adjusted consumption data for individual food items during the period of 1991-95 were given in tabular forms for groups of cereals potatoes sugars & sweets, legumes, nuts & seeds, fruits, vegetables, meats, eggs, dairy products oils & fats and fishery foods. Conversion factors of processed foods including wheat products, soybean products, Kimchi and dairy products into their raw materials were tentatively proposed. Great differences between supply data and intake data of food commodities were pointed out to be likely due to the seasonal variation and ignorance of processed foods and dining-out in the national nutrition survey. It is recommended to utilize these optimized food intake data as the nationally-representative one until new data from the national health and nutrition survey undertaken after modified procedures since 1998 are obtained and verified in future.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.5
• /
• pp.40-45
• /
• 2008

In this paper, a microstrip linear tapered slot antenna is designed. A tapered slot antenna(TSA) has many advantages such as low profile, low weight, easy fabrication, and compatibility with monolithic microwave integrated circuits(MMIC). In addition, it has demonstrated multi octave bandwidth, moderately high gain, and symmetrical E- and H-plane beam patterns. A feed network is implemented with transition between a microstrip and a slot line for the microstrip linear tapered slot antenna. The transition is consist of two sides. One side has a microstrip line, the other side has a slot line. The dimensions of the microstrip and slot line are ${\lambda}_m/4$ and ${\lambda}_s/4$ at the center of the cross section of the microstrip and slot line. In order to get broad bandwidth antenna characteristics, the tapered length is chosen as $4{\lambda}_o$ and termination width is chosen as $1.75{\lambda}_o$. Experimental results show that the microstrip tapered slot antenna has symmetrical E- and H-plane beam patterns with around 5GHz of bandwidth at center frequency of 5.0GHz.

• KSBB Journal
• /
• v.17 no.2
• /
• pp.195-202
• /
• 2002

The production conditions of cellulolytic enzymes by a fungus, strain FJ1, were optimized using response surface analysis. The culture factors which largely affected the production of enzymes such as cultivation time, carbon source concentration, nitrogen source concentration, and composition ratio of carbon sources were employed. Optimizedconditions of the factors above corresponding to each cellulolytic enzyme production were as fellowing: CMCase production was obtained in the conditions of cultivation time of 5.4 days, carbon source concentration of 3.5%, nitrogen source concentration of 0.6%, and composition ratio of carbon sources of 52:48 (avicel:CMC), xylanase appeared in the conditions of 5.3 days, 3.5%, 0.8%, and 54:46, respectively, and $\beta$-glucosidase were 7.0 days, 5.0%, 1.0%, and 83:17, respectively, and avicelase were 6.5 days, 4.0%, 0.9%, and 64:36, respectively. The activities of CMCase, xylanase, p-glucosidase, and avicelase predicted by the response surface methodology were 33.5, 52.6, 2.88, and 1.84 U/mL, respectively, and $\beta$-glucosidase activity was enhanced up to 74% when compared to that obtained in the experimental conditions.

• Conservation Science in Museum
• /
• v.16
• /
• pp.4-13
• /
• 2015

In most gold objects crafted using the granulation technique that have been thus far discovered in the Korean Peninsula, granules were joined using a soldering alloy of gold and silver. However, it was recently revealed through SEM-EDS analysis performed on the ornamented dagger sheath from Gyerim-ro Tomb No.14 in Gyeongju that the gold granules were joined to the surface of this sheath using an entirely different technique. The gold granules on the Gyerim-ro dagger sheath are evenly sized and shaped, the surface has a dendritic texture. Dendritic textures are a characteristic feature of metal alloys, not observed in pure metals. As a matter of fact, the gold granules were made of a ternary alloy of 77wt% Au, 18wt% Ag and 4wt% Cu. Due to this component, the alloy has a melting point below 1000℃ (approximately 980℃), which is significantly lower than 1064℃, the melting temperature of pure gold. This makes it possible to join the gold granules directly to the surface of the sheath by briefly heating them to high temperature, without the use of soldering or any other media. When examined through SEM image, the surface of the sheath showed no traces of soldering, it suggests that the granules were joined through unaided fusion.