• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.518-521
• /
• 2016

Korea is surrounded on three sides by the sea, through the maritime transportation accounts for close to 90% share in the total cargo volume. In addition, there are amount of small and medium-sized fishing vessels registered. These days, a number of maritime accidents caused many casualties and having an adverse effect on the marine environment. Therefore, there is a need for a maritime traffic control has been increasing. Information about the ship is divided into AIS information for VTS, Port Management Information System (Port-MIS) operated by the Port and vessels pass (VPASS) that are installed on fishing. However, there is a problem that is not achieved the information exchanged between each other. That is, information on the vessel are stored in diverse inefficient in the management, operation and utilization. This paper discusses the ways to efficiently manage and integrate vessels information for VTS, and proposes the method for implementation and application.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.137-137
• /
• 2017

Al-Mg 합금은 비중이 적고 강도가 우수하기 때문에 해양 환경에서 구조용 재료로 많이 사용되고 있으며, 특히 선박용 재료로 사용될 경우 선체의 중량을 줄일 수 있어 연료비가 절감되며 선속의 고속화가 가능하다. 그러나 해양환경에서의 재료 특성에 관한 지식 및 관련 기술 부족으로 알루미늄 선박 건조는 활성화 되지 못하고 있는 실정이다. 알루미늄 합금은 공기 중에서는 우수한 내식성을 지니는 것으로 알려져 있으나 해수환경에서는 염소이온에 의한 부동태 피막 파괴로 인해 내식성이 저하되며 공식 및 응력부식균열 등에 의한 손상이 발생할 수 있다. 특히 용접부의 경우, 모재에 비해 부식손상에 취약하며 기공과 같은 용접 결함을 포함하고 있어 구조물 파괴의 시발점이 될 수 있으므로 선박 및 구조물 건조시 대비가 필요하다. 그러나 이에 관한 충분한 연구가 이루어지지 않아 국내 중소형 조선소의 경우 알루미늄 선박 건조에 어려움을 겪는 경우가 많다. 따라서 본 연구에서는 선박 건조 및 해양 구조물에 널리 사용되는 Al 5083-H321 합금 용접부에 대하여 해수 내 부식 특성을 연구하고자 한다. 부식특성 파악을 위한 전기화학적 실험에 앞서 화학적 에칭을 통해 미세부위별 실험을 수행하였다. 기준전극은 은/염화은 전극을 대극은 백금전극을 사용하였으며, 타펠 분석을 위한 분극실험은 OCP를 기준으로 -0.25 ~ +0.25 V까지 실시하였고 양극분극실험은 OCP ~ +3.0 V까지 실시하였다. 양극분극 실험 후 부식된 표면은 주사전자현미경과 3D 분석을 통해 용접부 조직에 따른 전기화학적 특성을 관찰하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.13-18
• /
• 2006

In this paper, occurrence tendency of the sick and wounded on board ship is analyzed. The medical management systems according to shipping companies are investigated. Furthermore, comparative analysis with the medical support system for seafarers in advanced country is carried out.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.13-21
• /
• 2003

Ships if 500 gross tonnage and upwards constructed on or after 1 July 2002 shall have an automatic tracking aids according to SOLAS V /19 but existing ships less than 10,000 gross tonnage constructed before 1 July 2002 have potential collision risks due to the lack of automatic plotting devices like as an ATA This paper aims to provide a homemade ATA by developing the tracking algorithm for ATA and to prevent collision incidents by distributing ATA system to coasters.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.2
• /
• pp.5-13
• /
• 2003

Ships of 500 gross tonnage and upwards constructed an or after 1 July 2002 shall have an automatic tracking aids according to SOLAS V/19 but existing ships less than 10,000 gross tonnage constructed before 1 July 2002 have potential collision risks due to the lack of automatic plotting devices like as an ATA. This paper aims to provide a homemade ATA by developing the tracking algorithm for ATA and to prevent collision incidents by distributing ATA system to coasters.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.529-537
• /
• 2021

Membrane-type hull and cargo holds have been designed and built for large ship. However, there is a growing interest in applying the same technology to small and medium-sized Liquefied natural gas(LNG) carriers to meet the recent increase in demand for LNG as an ecofriendly fuel and for expanding LNG bunkering infrastructure. The purpose of this study is to apply the IMO Type-B tank to small and medium-sized LNG carriers and verify the safety and suitability of the design. Fatigue crack propagation analysis was performed to install a partial second drip tray installed at the lower part of the LNG cargo tank by calculating the amount of leaked gas in the support structure supporting the cargo tank. First, a program for fatigue crack propagation analysis was developed, in which Paris' law and British Standard 7910 (BS 79110) were applied based on the International Code for the Construction of Equipment and Ships Carrying Liquefied Gases in Bulk, an international standard for LNG carriers. In addition, a surface crack propagation analysis was performed. Next, a methodology for assuming the initial through-crack size was developed to determine the size of the partial second barrier. The analysis was performed for 15 days, which is a possible return time after cracks are detected. Finally, the safety and suitability of the IMO Type-B for LNG cargo tanks required by international regulations were verified. For the accurate analysis of fatigue crack propagation, it is necessary to develop and verify the analysis procedure based on direct analysis and international regulations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.218-219
• /
• 2018

쌍동선형은 단동선형에 비해 안정성 및 저항성능이 우수하며 그 형상은 일반적으로 대칭 및 비대칭으로 구분한다. 이러한 쌍동선은 고속으로 운항하는 경우 선체사이의 파랑 중첩현상을 줄이기 위해 주로 비대칭선형을 사용한다. 또한, 중소형선박은 선미터널을 적용하여 추력효율을 향상시킨다. 본 연구에서는 비대칭 고속 쌍동선의 선미터널 입구영역의 경사각 변화에 따른 유체역학적 특성(저항성능, 항주자세, 압력분포)에 대한 수치해석 연구를 수행하였다. 수치해석은 상용프로그램 STAR CCM+를 이용하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.1
• /
• pp.55-64
• /
• 1999

Large size shipyards have peformed the generating of piece and the nesting using shipbuilding-oriented CAD program, which requires higher skilled operators and lots of costs. So, medium and small size shipyards have pursued different types of piece generation and nesting (arrangement method). This research is to develop a program for the generating of pieces with parametric macro method and a STRIP program for the nesting of pieces by PC, which can be applied in such shipyards.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1013-1017
• /
• 2003

선박의 진동문제는 고출력 엔진의 채용과 고속화 및 전문화가 되면서 구조의 최적화에 따른 경향화 설계 및 각종 주요 기진원들이 다양화됨에 따라 새로운 진동문제가 많이 발생하게 되었으며 특히 최근 중소형 조선에서 건조중인 특수한 선박들의 경우 비교적 대용량의 출력을 가진 엔진과 긴 추진 축계 시스템 등으로 인하여 과도진동의 발생가능성이 커지고 있다 본 연구에서는 Supply Ship의 시운전 중에 발생한 상부구조물의 과도진동 현상의 원인을 분석하기 위해 다양한 운항 조건에서의 실선 진동 계측 및 분석을 수행하였으며 이를 바탕으로 효과적인 대책방안을 강구하기 위하여 구조의 진동특성 검토 및 진동해석을 수행하였다. 피리고 제시된 진동저감 대책이 적용된 후에 재 시운전시 진동 계측을 수행하여 대책 안의 유용성을 확인하였다.

• Smart Media Journal
• /
• v.2 no.1
• /
• pp.42-47
• /
• 2013

The paper presents VDR system for efficiency of ocean navigation device and how to output and to save data using this system as well as compressed digital data and analog video output from the camera are utilized at the same time. The compressed digital data is used to store video for VDR device while analog video is used to display on screen in real-time so that VDR system saves the load on SD memory card without navigation terminal and output it with real-time video. Also, the control method using VDR system are proposed for saving and outputting data.