• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.78-83
• /
• 1997

The paper presents the experimental analysis of a Stewart platform-based force-torque senor. The closed-form solution of forward kinematics of the Stewart platform is derived approximately by way of a linearization technique, and the solution is used in the force analysis of the force-torque sensor. An exper- mental studies show that the proposed method including gravity compensation algorithm is valid for Stew- art platform-based force-torque sensors. The performance of the developed force-torque sensor is evaluated in view of accuracy and linearity in measurements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.82-87
• /
• 2003

This research is concerned with ground experiments for satellite solar array deployment as well as the validation of theoretical modeling technique presented in the previous paper. We carried out the experiments on the strain energy hinge with stopper to investigate he buckling characteristics of the SEH, which affects the shape and the speed of the solar array deployment. The moment-angle diagram obtained from the experiments was later combined with the theoretical deployment model. This paper also presents the details of the ground experiments performed at the Korea Aerospace Research Institute(KARI) . It was found that the ground experimental results were in good agreement with the theoretical predictions thus validating the dynamic modeling technique.

• The Journal of Korea Robotics Society
• /
• v.15 no.1
• /
• pp.48-54
• /
• 2020

Home robot arms require a payload of 2 kg to perform various household tasks; at the same time, they should be operated by low-capacity motors and low-cost speed reducers to ensure reasonable product cost. Furthermore, as robot arms on mobile platforms are battery-driven, their energy efficiency should be very high. To satisfy these requirements, we designed a lightweight counterbalance mechanism (CBM) based on a spring and a wire and developed a home robot arm with five degrees of freedom (DOF) based on this CBM. The CBM compensates for gravitational torques applied to the two pitch joints that are most affected by the robot's weight. The developed counterbalance robot adopts a belt-pulley based parallelogram mechanism for 2-DOF gravity compensation. Experiments using this robot demonstrate that the CBM allows the robot to meet the above-mentioned requirements, even with low-capacity motors and speed reducers.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.920-926
• /
• 2007

새로운 매체와 접촉 시 발생하는 거부감을 최소화 하고 별도의 학습 없이 사용 가능한 직관적 명령 전달 방식의 매개 인터페이스를 제안한다. 제안하는 매개 인터페이스는 3차원 공간에서 사용가능한 가상 마우스와 TV 리모트 컨트롤러의 기능적 결합을 목표로 하고 실버세대들에게 익숙한 매체인 펜을 형태로 삼아 개념적으로 설계되었다. 구체적인 구현은 가속도계의 신호를 분석하거나 펜촉에 레이저 포인터를 추가하여 레이저 포인터의 좌표 변화를 웹캠으로 추적, 인식하는 방법으로 구분하였고 본 논문에서는 가속도계의 경우를 소개한다. 가속도계 신호분석을 통해 마우스의 기능을 모사하고 동작을 감지하는데 발생하는 문제점과 이를 해결하기 위한 기존 연구를 분석하고 동작 중에 중력방향의 수직축이 바뀌면서 발생하는 가속도계 신호의 오류를 보상하기 위해 제안된 Zero Velocity Compensation 방법을 소개한다. ZVC의 결과에 필수적인 저주파의 시계열 신호 실시간 끝점 추출과 동시에 패턴인식을 위한 특징추출 기능을 수행하는 새로운 알고리즘을 제안하며 기존의 방법과 실험적으로 성능을 비교한다. 또한 입력된 가속도계 신호를 학습된 인식기를 통해 인식하는 기존의 연구에서 더 나아가, 마우스의 좌표변화를 짧은 시간동안 가속도 신호의 실시간 분석을 통해 모사하기 위해 변형시킨 알고리즘을 소개한다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.7
• /
• pp.609-614
• /
• 2005

Parallel manipulators have been used for a variety of applications, including the motion simulators and mechanism for precise machining. Since the ball screws used for linear motion of legs of the Stewart-Gough type parallel manipulator provide wider contact areas than revolute joints, parallel manipulators are usually more affected by frictional forces than serial manipulators. In this research, the method for detecting the frictional forces arising in the parallel manipulator using the gravitational force is proposed. First, the reference trajectories are computed from the dynamic model of the parallel manipulator assuming that it is subject to only the gravitational force without friction. When the parallel manipulator is controlled so that the platform follows the computed reference trajectory, this control force for each leg is equal to the friction force arising in each leg. It is shown that control performance can be improved when the friction compensation based on this information is added to the controller for position control of the moving plate of a parallel manipulator.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.318-324
• /
• 2010

In this paper, the structure of the gravity compensator has been designed and applied to a light structure of a new 6-axis robot manipulator to enhance its torque performance. Also, analyses on the kinematics and inverse-kinematics of the manipulator have been performed. An FEM analysis has been performed on the structure of robot links to have an excellent performance of delivering 25 kg payload despite of 30kg weight, which is very light compared with other manipulators. Through the FEM analysis, the stability on the vending or fracture of the links of the robot manipulator has been verified.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.97-98
• /
• 2011

This paper is about the study of a new exo-skeleton device applying a gravity compensator. The exo-skeleton devices is to reduce the external torque applied to the human body joint for the purpose of helping the disabled, reducing heavy payload for industry workers or military soldiers. Most of the exoskeleton devices are actuated by the motors, but motors are limited in energy such that a short durability is always a big problem. In this paper, an exoskeleton device using a new gravity compensator based on a torsion bar is proposed to reduce the torque load applied to human body joints. The exoskeleton device is designed for the lower body of human. Analyses on the torsion bar spring and link of the exoskeleton device using FEM method were performed. To reduce the applied torque to the human joint, a torsion bar gravity compensator is applied to the exoskeleton. The effect of the torsion bar compensator for the exoskeleton device was verified through load test using developed test equipment.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.2
• /
• pp.115-123
• /
• 2017

This paper presents the design and the control performance of a novel dynamic compliant-arm support with parallel elastic actuators that was developed to assist with the daily living activities of those whose arms are compromised by muscular disease or the aging process. The parallel elastic-arm support consists of a compliant mechanism with combined passive and active components for human interaction and to reach the user's desired positions. The achievement of these tasks requires impedance control, which can change the virtual stiffness, damping coefficients, and equilibrium points of the system; however, the desired-position tracking by the impedance control is limited when the end-effector weight varies according to the equipping of diverse objects. A prompt algorithm regarding weight calibration and friction compensation is adopted to overcome this problem. A result comparison shows that, by accurately assessing the desired workspace, the proposed algorithm is more effective for the accomplishment of the desired activities.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.688-694
• /
• 2010

This paper presents a gravity compensator for the manipulator of a service robot. The manipulator of a service robot is operated with low velocity for the safety reason in most cases. In this situation gravitational torques generated by the mass of links are often much greater than dynamic torques for motion. A gravity compensator can counterbalance the gravitational torques, thereby enabling to utilize relatively low power motors. In this paper the gravity compensation for the roll-pitch rotation is considered which is often used for the shoulder joints of the manipulator of a service robot or humanoid robot. A gimbals is implemented and two 1-dof gravity compensators are equipped at the base. One compensates the gravitational torque at the roll joint and another provides the compensational torque for the gimbals. Various analyses showed that the proposed compensator can counterbalance the gravitational torques of 87% at the pitch joint and 50% at the roll joint. It is verified from dynamic simulations that the proposed compensator effectively counterbalances the gravitational torques.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.810-815
• /
• 2004

In this paper, we propose new parallel mechanism of a 3 dimensional biped robot whose each leg is composed of two 3-dof parallel platforms linked serially. This proposed parallel mechanism is able to move freely in the man-made environment and is applied to various fields, such as medical, welfare, and so on. And a total weight of each leg is expected to be lighter than serial linked leg. One side leg consists of a 3-dof orientation platform and 3-dof asymmetric parallel platform. The former consists of three active linear actuators and seven passive joints, and the latter of two active linear actuators, one active rotational actuator and eight passive joints. Thus, there are two kinds of parallel platforms each chain's elements and active joint's positions are different for the biped robot to move freely like a serial link without the kinematics constraints. The effectiveness and the performance of the proposed parallel mechanism and locomotion trajectory are shown in computer simulations with a 12-DOF parallel biped robot.