• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.101-103
• /
• 2010

본 논문에서는 다중 셀 환경의 OFDMA 기반 복호 후 재전송 중계 네트워크를 위한 새로운 부반송파 할당 기법에 대해서 제안한다. 제안된 기법에서는 기지국 간의 채널 정보 공유를 통해 공평성 제한을 가지면서 전체 통신 용량이 최대가 되도록 중계단말기와 수신단말기에 부반송파를 할당한다. 공평성 제한은 각 중계단말기의 최대 전송 전력과 각 수신단말기의 최소 통신 용량에 부과되어 중계단말기가 전력을 과도하게 사용하는 것을 막고 수신단말기가 채널 상태가 좋지 않더라도 최소한의 통신 용량을 확보할 수 있도록 한다. 모의실험 결과 제안된 기법이 대조군인 static기법에 비하여 부반송파 당 더 높은 주파수 효율을 얻는 다는 것을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.57-64
• /
• 2011

A two-way relay channel is a bidirectional cooperative communication channel between two nodes using a relay. In many cooperative communication schemes, a relay transmits its data to each node using separate channels. However, in the two-way relay channel, a relay can broadcast the network-coded signal to both nodes in a same time slot, which can increase the system throughput. In this paper, a new cooperative network error correcting scheme using distributed turbo code in a two-way relay channel is proposed. The proposed scheme not only increases the system throughput using network code but also improves the performance by utilizing the LLR information from relay node and other user node through distributed turbo code. Also, a power allocation scheme is investigated for various channel conditions to improve the system performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10A
• /
• pp.972-979
• /
• 2008

Two-way relay channel is a bidirectional cooperative communication channel that two terminals communicate each other with the help of a relay. In the previous cooperative communication schemes, a relay uses two divided resources for bidirectional transmission. When a network coding is used at a relay, the relay can transmit bidirectional data to two terminals simultaneously using one resource only. Thus the throughput of this scheme is greater than that of the previous scheme. In this paper, we showa two-way cooperative ARQ protocol using network coding and the throughput of this protocol is analyzed using a state diagram.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.4
• /
• pp.216-227
• /
• 2014

Mechanical Relay (McR) is a relaying architecture to enable data communications, where it can endure the transportation delay and intermittent disconnection. Every kind of vehicular infrastructures can be readily utilized for the mechanical relaying in the manner of moving natures, which brings the most significant consequences compared to conventional relaying schemes. In this paper, we analyze the ergodic network throughput of McR in wireless line networks (WLN) to compare the results between employing McRs and direct multi-hopping through the users without McRs. We demonstrate the McR scheme that are not only Ve-SISO but also Ve-SIMO/MISO. The numerical results of ergodic network throughputs contribute to the trade-off relation depending on the speed v of McRs, intensity factors ${\lambda}_u$ and ${\lambda}_r$, and the methods of how McRs are utilized.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.291-296
• /
• 2012

In this Paper, we propose a multi-hop transmission in cognitive underlay network. In Secondary network, We assume that a secondary source S attempts to transmit D its signal to a secondary destination via N+1 hops with help of N relays $R_1$, $R_2$, ${\ldots}$, $R_N$. At hop k between relay $R_k$ and relay $R_{k+1}$. we assume that there is a primary user $PU_k$. In this paper, we assume that these channels are Rayleigh fading channels. In underlay network, the secondary transmitter has to adapt its power so that the interference caused at the primary user is less than a maximum interference threshold. considering the hop transmission between the transmitter and the repeater, we find transmit power and signal-to-noise ratio(SNR). Between the transmitter from the receiver depending on the number of relay in the underlay network, we compared to find the transmit power and signal-to-noise ratio(SNR). Finally we find optimal number of relay and optimal threshold value.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.69-74
• /
• 2014

In this paper, an energy harvesting scheme is investigated in the multi-relay cooperation communication. Our proposal is to maximize the diversity gain and overcome the disadvantages of the limited power wireless devices. The best relay is selected based on the maximizing channel gains from source to relays so that the harvested energy at selected relay is best. If an internal power of the best relay is lower than a defined target power, the best relay will harvest the energy from the source, and the help of the source-destination link is changed to the second best relay. By this operation method, the diversity gain is maintained and the performance of the network is improved. Finally, performance of the proposed protocol is analyzed in terms of bit error rate, utilization efficiency, power collection efficiency.

• The Journal of the Korea Contents Association
• /
• v.5 no.4
• /
• pp.219-226
• /
• 2005

With the rise of interest in sports and introduction of a five-day duty service, it is. increasing the desire for leisure and well-being recently. In this paper, 1 design and implement a baseball broadcasting system for PDAs to offer a sports broadcasting service using wireless network. The implemented baseball broadcasting system is composed of PDA clients, a relay reporter, and a relay server. Users can search and retrieve baseball-related information as well as relay broadcasting information using PDA.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.766-773
• /
• 2007

Conventional wireless sensor network(WSN) has limited power and bandwidth. In order to develop multimedia sensor technology, high data rate communication systems are required. Cooperative communication system can help to decrease power consumption through spatial diversity. In cooperative transmission, one partner node assists one sensor node to transmit their data to destination. Instead of using M partners for M sensor nodes, we propose 1 partner for M sensor nodes. Proposed protocol offers similar diversity order as conventional one with much less bandwidth and hardware. It is able to almost reduce scattered nodes interference using orthogonal sub-carriers. In addition, we examined a power allocation between sensor nodes and relay that optimize the system performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.7-13
• /
• 2009

In This Paper, we propose relay schemes for network-coding based two-way relay communication in multi relay channel. Two-way relay channel communication is a bi-directional communication that two users exchange their data with the help of a relay. Network-coding based Two-way relay communication can achieve more throughput compared to conventional two-way relay communication. In this paper, we propose relay selection schemes to provide maximum performance considering instantaneous signal-to-noise in multi-relay channel. Simulation results show that the proposed relay selection schemes can provide diversity order according to the number of relays.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.24-29
• /
• 2011

Comparing conventional one-way relaying, two-way relaying scheme with network coding can achieve high throughput by reducing the transmission time. Coded cooperation protocol, which is a algorithm that uses coding on physical layer, can achieve high reliability. In this paper, we propose coded cooperation protocol over two-way relay network. Simulation results show proposed protocol has better performance in terms of reliability and throughput compare with conventional amplify and forward protocol. Also, with same throughput, proposed protocol has better performance in terms of reliability compare with the conventional hybrid decoded and forward protocol.