• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.905-910
• /
• 2010

In this paper, visible light communication(VLC) system modulated by a switching driver circuit of lighting light emitting diode(LED), not only for illumination but also for optical wireless communication, is implemented. Presented system could overcome the drawbacks of prior linear modulation technique such as low efficiency, heat generation, and limits to realization of high power lighting LED. Experimental results from the realized digital audio system are presented to confirm the superiority of the proposed circuit. Our prototype achieves a transmission data rate of 10 Mbps with a radius of 1.5 meters using 20 W output power, and the signals were detected successfully.

• Korean Journal of Remote Sensing
• /
• v.27 no.1
• /
• pp.25-31
• /
• 2011

Precise control of antenna position is very critical in ArcSAR system which uses an arc-rail as a platform for the antenna movement instead of linear rail. In order to minimize the antenna positional error, we improved the motion driving system and applied a newly developed motion control S/W which utilizes the real time antenna position information from magnetic linear scale and encoder. The experimental results showed that the rotational RMS error was reduced to $0.0062^{\circ}$ from $0.0432^{\circ}$. In terms of antenna positional RMS error for the arm length of 3m, it was reduced to 0.324mm from 2.262mm. It is expected that the ArcSAR system can be used to monitor the sub-millimetric displacement of terrain and structural targets.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.139-145
• /
• 2008

There has been lots of studies on communication systems using millimeter wave recently in many countries, specially in newly assigned 57GHz ~ 64GHz ISM band. Among those studies, IEEE 802.15.3c standard proposes OFDM (Orthogonal Frequency Division Multiplexing) systems for high data rate transmission support. But OFDM method has the PAPR (peak-to-Average Power Radio) problem The PAPR problem is to decline the performance of the transmission system due to signals distorted severely when passing through nonlinear components such as ADC/DAC and power amplifiers. In order to solve the problem of P APR, this paper suggests SSC (Sine Soft Clipping) and analyzes the PAPR, CCDF, PSD, BER by applying SAW(Surface Acoustic Wave) filter and power amplifiers to IEEE 802.15.3.c OFDM WPAN systems.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.5
• /
• pp.474-482
• /
• 2002

One dimensional Radiometric scanning system was fabricated and tested as a filmless radiographic inspection system, which could be applied to the evaluation of the corrosion and deposits in the pipeline. This system is composed of the single radioactive source of the collimated focusing beam, and single scintillation detector of BGO, and the mechanical scanning system to transport and align the source and detector, and the operating software to automatically control the mechanical scan system. The performance of the system was simulated using GEANT4 software. This system is applied to one specimen having an artificial falw(flat bottom hole) in the pipe and the other specimen with thickness variation. For the inspection by using the radioactive source in the pipeline, it is possible to evaluate the corrosion and deposits in real time and without film.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.479-491
• /
• 2012

In this paper we performed evaluation of the economics of a district heating system (DHS) consisting of energy suppliers and consumers, heat generation and storage facilities and power transmission lines in the capital region, as well as identification of optimal operating conditions. The optimization problem is formulated as a mixed integer linear programming (MILP) problem where the objective is to minimize the overall operating cost of DHS while satisfying heat demand during 1 week and operating limits on DHS facilities. This paper also propose a new forecasting model of the system marginal price (SMP) using past data on power supply and demand as well as past cost data. In the optimization, both the forecasted SMP and actual SMP are used and the results are analyzed. The salient feature of the proposed approach is that it exhibits excellent predicting performance to give improved energy efficiency in the integrated DHS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3B
• /
• pp.183-198
• /
• 2006

We define the incomplete medium sharing system as a multi-channel shared medium communication system where constraints are imposed to the set of channels that may be allocated to some transmitter-receiver node pairs. To derive a centralized MAC scheme of a incomplete medium sharing system, we address the problem of optimal channel allocation The optimal channel allocation problem is then translated into a max-flow problem in a multi-commodity flow graph, and it is shown that the optimal solution can then be obtained by solving a linear programming problem. In addition, two suboptimal channel allocation schemes are proposed to bring down the computational complexity to a practical/feasible level; (1) one is a modified iSLIP channel allocation scheme, (2) the other is sequential channel allocation scheme. From the results of a extensive set of numerical experiments, it is found that the suboptimal schemes evaluate channel utilization close to that of the optimal schemes while requiring much less amount of computation than the optimal scheme. In particular, the sequential channel allocation scheme is shown to achieve higher channel utilization with less computational complexity than . the modified iSLIP channel allocation scheme.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.496-502
• /
• 2007

In the present paper, a new version of DYMORE, which is an analysis to solve a nonlinear multi-body dynamics problem, is used to simulate an Individual Blade Control (IBC) algorithm in order to reduce vibration in helicopter rotors. The Active Twist Rotor (ATR), in which Active Fiber Composites (AFC) are embedded, is utilized for IBC. The main purpose of the present investigation is to compare the analytical results with experiments and previous version of DYMORE. The experiments are performed at NASA Langley Transonic Dynamics Tunnel. According to the present result, it is observed that the correlation regarding the vibratory loads is improved.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.9
• /
• pp.35-42
• /
• 1998

Finding a technique to achieve high machining precision and high productivity is an important issue for CNC machining. One of the solutions to meet better performance of machining is feedrate control. In this paper we present an adaptive feedrate neuro-control method for high precision and high speed machining. The adaptive neuro-control architecture consists of a neural network identifier(NNI) and an iterative learning control algorithm with inversion of the NNI. The NNI is an identifier for the nonlinear characteristics of feedrate and contour error, which is utilized in iterative learning for adaptive feedrate control with specified contour error tolerance. The proposed neuro-control method has been successfully evaluated for machining circular, corner and involute contours by computer simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.820-825
• /
• 2004

In this paper an octave tuning voltage controlled oscillator which is used in set-top TV tuner was designed. Oscillation frequency range is 0.9 GHz～2.2 GHz with 1.3 GHz bandwidth. By using 4 varactor diodes in base and emitter of transistor, wide-band tuning, sweep linearity and low phase noise could be achieved. Designed VCO requires a tuning voltage of 0 V ～ 20 V and DC consumption of 10 V and 15 mA. Designed VCO exhibits an output power of 5.3 dBm $\pm$1.1 dB and a phase noise below -94.8 dBc/Hz ＠ 10 kHz over the entire frequency range. The sweep linearity shows 65 MHz/V with a deviation of $\pm$10 MHz.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.6-6
• /
• 2018

최근 집중 호우로 인한 내수침수 피해가 도시화와 기후변화로 늘어나고 있다. 내수침수 피해로 인한 복구비용과 시간이 증가하고 있으며 향후에는 이보다 더 크게 늘어날 것으로 예상된다. 이러한 문제를 해결하기 위하여 충분한 선행시간을 가지고 내수 침수 구역을 제시할 수 있어야 한다. 기존의 물리적 모델은 정확하고 정교한 결과를 제공하지만, 시뮬레이션을 준비하고 마치는 데에 시간이 많이 소요된다. 그 이유로서는 강우량, 지형적 특성, 배수관망 시스템, 수문학적 매개변수 등의 다양한 데이터도 필요하기 때문이다. 이는 도시유역에 대한 내수침수의 실시간 예측이 어렵게 되었으며, 충분한 선행시간을 확보하지 못하는 원인이 되었다. 본 연구에서는 이 문제에 대한 해결책으로 결정론적 방법과 확률론적 방법을 자료지향형 모형으로 결합하여 해결책을 제시하고자 하며, 특정 강우 조건하에 도시유역에서의 내수침수에 영향을 미치는 맨홀에 대한 정보를 제공하고자 한다. 위와 같은 과정을 수행하기 위하여 입력자료 조합에 대한 비선형 분석을 실시하였으며, 그 결과로 특정 강우 조건에 대하여 각 맨홀에 대한 누적월류량을 예측할 수 있는 비선형 인공신경망을 구축할 수 있었다. 본 연구에서 제시된 방법론은 국내의 강남 배수분구에 대하여 적용이 되었으며, 내수침수 예측결과와 2차원 해석결과를 비교하고자 하였다. 본 연구에서는 위 과정을 통하여 1차원 도시유출해석을 위한 입력 자료를 준비하는 시간을 절약하고, 다양한 강우 조건과 내수침수지도 사이의 연관성을 학습하는 예측 모형을 이용하여 도시유역의 내수침수에 대한 충분한 선행시간을 확보하고자 한다. 결론적으로, 이 연구의 결과는 도시유역에 대한 비구조적 대책 수립에 도움을 줄 것으로 확인이 되며 도시 유역 내에 맨홀 위치들을 고려한 위험지구를 파악하는 데에 유용할 것으로 판단된다.