• Journal of Korean Society of Transportation
• /
• v.15 no.1
• /
• pp.129-156
• /
• 1997

8차로 고속도로에서 중앙분리대와 길 어깨에 의해 측방 여유폭이 제공되는 외측차 로(1.4차로)와 측방 여유폭이 제공되지 않는 내측차로 (2.3차로)에서 나타나는 운전자의 횡 방향 주행특성을 4개 지점에서 비디오 촬영하여 분석한 결과는 다음과 같다. (1) 차량의 횡 방향 주행궤적은 차로의 중심으로부터 주행방향의 좌측으로 이격된 주행 행태를 보이고 있 으며 이는 운전석의 위치에 의한 영향으로 판단된다. (2) 차량의 병행 주행시 외측 차로의 중심 이격 거리는 평균 0.38m이고 내측차로의 중심 이격 거리는 평균 0.34m로 나타났으며 T-test 겨로가 내측 차로와 외측 차로의 주행 이격 거리는 신뢰도 95%에서 상이한 것으로 나타났다. (3) 외측 차로의 주행궤적간 이격 거리는 평균 3.90m이고 내측 차로의 주행궤적 간 이격 거리는 평균 3.54m로서 내측 차로의 주행궤적간 이격 거리는 외측 차로의 주행궤 적간 이격 거리보다 0.36m 작다. 특히 내측 차로의 주행궤적간 이격 거리는 내측 차로간 차로 중심간 간격인 3.6m 보다 0.1m 작은 것으로 나타났다. (4) 내측차로 확장 대안으로 기존 도로폭 유지안 (3.5m, 3.7m, 3.5m)과 기존 도로폭 확장안 (3.6m, 3.7m, 3.7m, 3.6m)을 고려할 수 있으며 두 대안의 비교·분석결과 경제적 영향을 고려할 때 기존 도로폭 유지안이 우수한 것으로 분석되었다.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.683-686
• /
• 1999

이동로봇은 주행성을 가지며 설정된 이동 경로에 따라 목적지까지 자율적으로 이동하기 위해서는 이동로봇의 실제 위치에 대한 정확한 정보가 확보되어야 한다. 정보확보를 위해서 보통 엔코더, 자이로센서, 비젼센서, 레이저 거리등의 센서를 주로 사용한다. 본 연구에서 주행중인 이동로봇의 위치는 상대센서인 엔코더를 통해 측정된 운동변화량과 출발점에서 이동로봇의 위치로부터 자기유도 주행방법에 의해 계산된다. 이들 상대센서는 이동로봇의 실제 이동에 따라 주행거리 및 주행 방향 변화를 항상 측정할 수 있으므로, 전체 주행구간에 걸쳐 이동로봇의 위치를 연속적으로 측정할 수 있다는 장점이 있으나, 상대센서 측정값에 발생된 오차가 위치 평가값이 연속적으로 누적되므로 실제 위치에 대한 오차가 발생하는 단점이 있다. 즉, 바닥의 미끄럼, 요철, 로봇의 요동(Vibration)등 큰 오차의 요인이 된다. 본 연구에서는 위치를 직접 추정하지 않고 엔코드에서 나온 위치오차, Heading 오차, 자체 엔코드오차 그리고, 자이로 오차와 지자기 센서 오차를 Extended Kalman Filter를 통해 추정하여 이 오차를 다시 위치 계산과 Heading에 되돌려 줌으로서 오차를 보정하는 방법을 제시한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.12
• /
• pp.1015-1020
• /
• 2016

An advantage of electric vehicles is that they are environmentally sustainable because they do not emit exhaust gases, such as $CO_2$ or Nox. A disadvantage is the low power performance of the motor and battery source, necessitating a reduction in the weight of the vehicle to increase efficiency. Another disadvantage is that the rechargeable battery enables an electric vehicle to only run for a limited number of miles before requiring electric charging. To solve these problems, the hybrid vehicle has been developed by combining environmental sustainability with the high performance of a conventional internal combustion engine. In this study, an electric UTV (Utility Terrain Vehicle) was transformed into a hybrid vehicle system by outfitting the vehicle with a drive auxiliary power system including a 125 cc internal combustion engine. This modification enabled us to extend the range of the hybrid UTV from 50km to 100km per one electric charging.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.101-108
• /
• 2004

The new transit fare in the Seoul Metropolitan is basically determined based on the distance-based fare system (DBFS). The total fare in DBFS consists of three parts- (1) basic fare, (2) transfer fare, and (3) extra fare. The fixed amount of basic fare for each mode is charged when a passenger gets on a mode, and it proceeds until traveling within basic travel distance. The transfer fare may be added when a passenger switches from the present mode to another. The extra fare is imposed if the total travel distance exceeds the basic travel distance, and after that, the longer distance the more extra fare based on the extra-fare-charging rule. This study proposes an algorithm for finding minimum fare route in DBFS. This study first exploits the link-label-based searching method to enable shortest path algorithms to implement without network expansion at junction nodes in inter-modal transit networks. Moreover, the link-expansion technique is adopted in order for each mode's travel to be treated like duplicated links, which have the same start and end nodes, but different link features. In this study, therefore, some notations associated with modes can be saved, thus the existing link-based shortest path algorithm is applicable without any loss of generality. For fare calculation as next steps, a mathematical formula is proposed to embrace fare-charging process using search process of two adjacent links illustrated from the origin. A shortest path algorithm for finding a minimum fare route is derived by converting the formula as a recursive form. The implementation process of the algorithm is evaluated through a simple network test.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.98-105
• /
• 2007

In this paper, we propose the method and system which determines the condition for safe and unsafe lane changing. To determine the condition, first, the system sets up the Region of Interest(ROI) on the neighboring lane. Second, a dangerous vehicle is extracted during the line changing. Third, the condition is determined to wm or not by calculating the moving direction, relative distance md relative velocity. To set up the ROI, the only one side lane is detected and the interested region is expanded. Using the coordinate transformation method, the accuracy of the ROI raised. To correctly extract the vehicle on the neighboring lane, the Adaptive Background Update method and Image Segmentation method which uses the feature of the travelling road are used. The object which is extracted by the dangerous vehicle is calculated the relative distance, the relative velocity and the moving average. And then in order to ring, the direction of the vehicle and the condition for safe and unsafe is determined. As minimizes the interested region and uses the feature of the travelling road, the computational quantity is reduced and the accuracy is raised and a stable result on a travelling road images which demands a high speed calculation is showed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.161-172
• /
• 2023

Autonomous driving vehicles recognize the surroundings through various sensors mounted on the vehicle and control the vehicle based on the collected information. The level of autonomous driving technology is improving due to the development of sensor technology and algorithms that process collected data, but the implementation of perfect autonomous driving technology has not been achieved. To overcome these limitations, through autonomous cooperative driving centered on infrastructure. In this study, developed a position correction sign that provides a reference for positioning of autonomous vehicles. First of all, an analysis was performed on the current status of positioning technology for autonomous driving. And measure the number of point clouds for the 1st sample consisting of two square reflective surfaces and 2nd sample that increased the vertical length of each reflective surface. Experimental results show that both primary and secondary products are installed at least 15 m apart It could be recognized as a sensor, and it was confirmed that the secondary production that increased the length of the top and bottom had a higher number of point clouds than the primary production and better expressed the shape of the facility.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.208-218
• /
• 2017

This study aims to develop the Vehicle Local Dynamic Map (V-LDM) and demonstrate its performance for providing dynamic map data efficiently to the vehicle control module. Firstly, the concept of the in-vehicle LDM has been established and then the system has been carefully designed according to the international standards. The high-precision digital map embedded in LDM has been designed to incorporate the lane-level information of road network, and the Dynamic Map protocol (DM protocol) which is a message protocol including the road data with dynamic traffic event data has been defined. The performance test of the proposed system has been conducted in the uninterrupted road section of Kyungbu expressway, showing that both of the data size and the elapsed time to finish the process are almost linearly proportional to the length of target road. Finally, it is recommended that the length of target road for DM protocol be less than 250m.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.481-487
• /
• 2005

In order to increase the autonomous navigation capability of a mobile robot, it is very crucial to develop a method for recognizing a priori known environmental characteristics. This paper proposes an ultrasonic sensor based real-time method for recognizing a priori known indoor environmental characteristics like a wall and corner. The ultrasonic sensor consists of an ultrasonic transmitter and two ultrasonic receivers placed symmetrically about the transmitter. Unlike previous methods the information obtained from the sensor is processed in real-time by extended Kalman filter to be able to correct the position and orientation of robot with respect to known environmental characteristics.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.2 s.302
• /
• pp.1-10
• /
• 2005

This paper presents a technique for localization of a mobile robot using a single ultrasonic sensor. The mobile robot is designed for operating in a well-structured environment that can be represented by planes, edges, corners and cylinders in the view of structural features. In the case of ultrasonic sensors, these features have the range information in the form of the arc of a circle that is generally named as RCD (Region of Constant Depth). Localization is the continual provision of a knowledge of position which is deduced from it's a priori position estimation. The environment of a robot is modeled into a two dimensional grid map. we defines a physically-based sonar sensor model and employs an extended Kalman filter to estimate position of the robot. The performance and simplicity of the approach is demonstrated with the results produced by sets of experiments using a mobile robot.

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.55-64
• /
• 1998

Directed graphic algorithm was applied to an empirical analysis of traffic occupant fatalities based on a model by Crandall. In this paper, Crandall's data on U.S. traffic fatalities for the period 1947-1981 are focused and extended to include 1982-1993. Based on the 1947-1981 annual data, the directed graph algorithms reveal that occupant traffic deaths are directly caused by income, vehicle miles, and safety devices. Vehicle mileage is caused by income and rural driving. The estimation is conducted using three stage least squares regression. Those results show a difference between the traditional regression methodology and causal graphical analysis. It is also found that forecasts from the directed graph based model outperform forecasts from the regression-based models, in terms of mean squared forecasts error. Furthermore, it is demonstrates that there exists some latent variables between all explanatory variables and occupant deaths.