• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.661-669
• /
• 2000

DS-CDMA downlink distinguishes actual user by orthogonal spreading codes ,but its orthogonality may be lost by the multiple access interference(MAI) caused by the multipath channel. Therefore in this paper, we proposed the single-user receiver, which use linear channel equalizer to eliminate the interference due to multipath channel and to recover orthogonality and then use code-matched filter to detect transmitted data. Unlike existing research, which mainly assumed ideal channel information, we use pilot channel assisted methods that is a kind of transmission of a parallel reference method to estimate the channel coefficients. Especially we use guard symbols which are inserted periodically to estimate channel coefficients exactly without interference from user signal. The results show that we accepted an approximately ideal channel information and achieved excellent performance improvement using proposed receiver compared with the conventional receiver especially user populations are high.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.637-644
• /
• 2012

In this paper, a new compact power divider is suggested. Instead of the quarter wavelength transmission line(TX-line)s for the branches of the conventional Wilkinson's power divider design method, we use our composite right- and left-handed(CRLH) TX-line zeroth order resonator(ZOR) bandpass filters of one twelfth wavelength and reduce the physical length of the power divider. Besides, the filters in the branches can secure the passband for power-division. To validate the proposed power divider, we take an L-band for millitary satellaite transponder as the test case and the performances of the circuit and full-wave simulation results with the CRLH properties of the structure are shown with the dispersion curve and E-field at the ZOR. The measurement is compared with the simulation results. Also, the size reduction effect by the proposed scheme is addressed

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.25-31
• /
• 2000

In this paper, we proposed an algorithm that used a direct method to set an initial value of Broydon-Fletcher-Goldfarb-Shanno(BFGS) method and, accordingly, conducted an experiment in optimal directivity synthesis of adaptive ultrasonic transducer by point source array. To certify the efficiency of this method, quasi-ideal beam with arbitrary beam width, rotating beam, and multi beam, all with the limited side lobe level -30dB, were chosen to check the problem of directivity synthesis that was formed by point source array in the second dimensional sound field. The numerical calculation results showed that the proposed method performed the directivity synthesis faster than the BFGS method did. In addition, the proposed method showed a good error correction for directivity synthesis, and did not demand the choice of initial value. Finally, it is also shown that the proposed method can be used for the adaptive control that was not possible with the direct method alone.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.1
• /
• pp.5-10
• /
• 2015

D2D (Device-to-Device) communication underlaying LTE-advanced networks is a promising technology to improve the system capacity and spectral efficiency. By sharing the same radio resources with cellular user equipments, D2D communications can significantly enhance the overall spectral efficiency. However, it may cause interference between D2D link and cellular link. Careful resource allocation and interference coordination between cellular and D2D communications are very important and need to be properly handled. This paper proposes a radio resource allocation scheme based on FFFR (Flexible Fractional Frequency Reuse) for D2D communication underlaying cellular networks. The base station selects randomly resource blocks assigned to cellular users, and reuses them for a D2D pair. Through simulations, we have confirmed that the proposed scheme improves the system throughput, reduces the computational complexity, and mitigates the interference of D2D link and cellular link.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.10
• /
• pp.51-57
• /
• 1999

In this paper, we deal with the problem of controlling an unknown nonlinear dynamical system, using wavelet network. Accurate control of the nonlinear systems depends critically on the accuracy and efficiency of the function approximator used to approximate the function. Thus, we use wavelet network which shows high capability of approximating the functions and includes the free-selection of basis functions for the control of the nonlinear system. We find the dilation and translation that are wavelet network parameters by analyzing the time-frequency characteristics of the controller's input to construct an initial adaptive wavelet network controller. Then, weights is adjusted by the adaptive law based on the Lyapunov stability theory. We apply this direct adaptive wavelet network controller to control the inverted pendulum system which is an nonlinear system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.529-534
• /
• 2002

It was recommended for all ship engaged in international voyages to carry the dedicated Digital Selective Calling receiver, DSC equipment, VHF transceiver, etc according to Global Maritime Distress & Safety System. Also International Maritime Organization recommended for navigation and communication equipments to applicate the EMC regulations, therefore most of electronic equipments using in the vessel to be faced with problems to cope with new regulations. This study has applied and analyzed the EMC for an equipment integrated with Ch.70 dedicated DSC receiver, DSC equipment, VHF transceiver and groped for solutions to cope with. The test has applied the electromagnetic interference such as the measurement for unwanted emissions from conductive & radio emission and the electromagnetic susceptibility such as the immunity from voltage, frequency variation and electro static discharge, hence comes to be understand the problems related with the power and the earth.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.139-145
• /
• 2008

In this paper, a microstrip surface wave antenna(SWA) with a frequency selective surface structure(FSS) is designed and measured. A microstrip SWA has many advantages such as low profile, low weight, easy fabrication, and compatibility with monolithic microwave integrated circuits(MMIC). In addition, it has demonstrated monopole like beam patterns. The microstrip SWA consists of two parts : a center-fed modified microstrip patch to excite surface wave, and a periodic patches to support the propagation of the surface waves. To obtain wide bandwidth, the ring type parasitic element is inserted and the circular patch is selected for the unit element in FSS structure. Experimental results show that the microstrip SWA has monopole like beam patterns at 5.9GHz. Impedance bandwidth and gain is 12% and 5.6dBi.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.105-111
• /
• 2004

This paper describes the design of navigation system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated nowdays use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of navigation for low cost unmanned aerial vehicle, unmanned target drone as our test bed in this paper is verified by both Hardware in the loop simulation(HILS) to test performance of GPS as GPS output frequency high and results of flight test.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.477-482
• /
• 2020

The human visual cortex has the characteristic that reacts sensitively to stimuli with special directional or temporal frequency changes while it is insensitive to selective stimuli of spatial phases. In this paper we implemented the model of complex cell using an image estimation iterative algorithm by Gabor wavelet transform. The performance of implemented model evaluated the consistency between the physiological experimental results in related papers. The implemented model is limited in the complete model of the receptive field in the retina where simple cells and complex cells are distributed together. But the implemented model express the reaction of the complex cells from the point of view of the detection of corners and edges.

• Journal of the Korea Concrete Institute
• /
• v.13 no.6
• /
• pp.610-618
• /
• 2001

This paper investigates the relationships between dynamic elastic modulus and static elastic modulus or compressive strength according to curing temperature, aging, and cement type. Based on this investigation, the new model of the relationships we proposed. Impact echo method estimates the resonant frequency of specimens and uniaxial compression test measures the static elastic modulus and compressive strength. Type I and V cement concretes, which have the water-cement ratios of 0.40 and 0.50, are cured under the isothermal curing temperatures of 10, 23, and 50$\^{C}$ Cement type and aging have no large influence on the relationship between dynamic and static elastic modulus, but the ratio of dynamic and static elastic modulus comes close to 1 as temperature increases. Initial chord elastic modulus which is calculated at lower strain level of stress-strain curve, has the similar value to dynamic elastic modulus. The relationship between dynamic elastic modulus and compressive strength has the same tendency as the relationship between dynamic and static elastic modulus according to cement type, temperature and aging. The proposcd relationship equations between dynamic elastic modulus and static elastic modulus or compressive strength properly estimates the variation of relationships according to cement type md temperature.