• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.220-220
• /
• 2010

펄스 직류 $BCl_3$ 플라즈마를 이용하여 GaAs와 AlGaAs의 건식식각을 연구하였다. 공정의 주요 변수는 펄스 직류 전압(350~550V), 펄스 직류 시간($0.4{\sim}1.2{\mu}sec$.), 펄스 직류 주파수(100~250kHz)이었다. 식각 실험 후 샘플의 식각률, 식각 선택도, 표면 형상을 비교, 분석하였다. 또한, 광학 발광 분석기(Optical Emission Spectroscopy)를 이용하여 식각하는 동안 플라즈마 방전 특성을 분석하였다. 표면 단차 측정기(Alpha-step IQ, Tencor)로 식각 깊이를 측정해 식각률을 계산하였다. 표면 거칠기 또한 단차 측정기의 표면 거칠기 프로그램을 이용하여 분석하였다. 식각 벽면과 표면 상태는 주사전자현미경(Field-emission scanning electron microscopy)을 이용하여 관찰하였다. 분석 결과는 1) 펄스 직류의 전압이 증가하면 전극에 걸리는 파워가 올라가고 GaAs와 AlGaAs의 식각률도 증가하였다. 2) 76 mTorr 공정 압력, $0.7{\mu}sec$. 펄스 직류 시간과 200 kHz 주파수 일 때 10 sccm $BCl_3$ 펄스 직류 플라즈마에서 GaAs와 AlGaAs 둘 다 약 $0.4{\mu}m/min$ 이상의 식각 속도를 보여주었다. 3) 식각 선택도는 펄스 직류의 전압이 높아지면 증가하였고, 펄스 직류 주파수의 증가도 공정 파워와 GaAs와 AlGaAs의 식각률을 증가시켰다. 4) 그러나 펄스 직류 주파수가 150kHz 이하일 때에는 GaAs와 AlGaAs가 거의 식각되지 않았다. 5) 표면 거칠기는 펄스 직류 주파수가 증가하면 미세하게 좋아졌고 플라즈마는 펄스 직류 주파수가 100~250kHz 일 때 생성되었다. 6) 펄스 직류 시간의 증가는 공정 파워, 식각률, 식각 선택도 모두의 증가를 가져왔다. 7) 광학발광분석기(OES) 데이타는 $BCl_3$ 플라즈마에서 넓은 범위(450~700nm)에서의 염소(Cl) 분자 피크를 나타내었다. 8) 전자 현미경 사진은 펄스 직류 전압이 400 V보다 550 V 일 때보다 더 이방성(Anisotropic)측면과 부드러운 표면을 나타냈지만, 조금의 홈(Trench)이 발견되었다. 결론적으로 펄스 직류 $BCl_3$ 플라즈마는 GaAs와 AlGaAs의 건식식각에서 우수한 결과를 나타냈었다.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.207-213
• /
• 2019

In this paper, we evaluate the communication performance of convolutional code with block interleaving in a frequency-selective channel. Block interleaving is a technique for spreading and rearranging digital data streams. A block interleaving technique is applied to improve the performance by dispersing the concentration of burst errors in a frequency-selective channel. As a result of evaluating the performance of the convolutional code with block interleaving in the water tank experiment, There was no difference in the performance of convolutional codes using block interleaving in a frequency-selective channel. However, in the frequency-selective channel, the convolutional code with block interleaving has a gain of 2dB, and it is confirmed that the underwater acoustic communication performance is improved.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.494-501
• /
• 2013

The convolution code(CC) of code rate 1/2 as a forward error correction (FEC) in Quadrature Phase Shift Keying (QPSK) is applied to decrease bit error rate (BER) by background noise and multipath in shallow water acoustic channel. Ratio of transmitting signal bandwidth to channel coherence bandwidth is defined as frequency selectivity index. BER and bit energy-to-noise ratio gain of transmitted signal according to frequency selectivity index are evaluated. In the results of indoor water tank experiment, BER is well matched theoretical results at frequency selectivity index less than about 1.0. And bit energy-to-noise ratio gain is also matched theoretical value of 5 dB. BER is effectively decreased at frequency selective multipath channel with frequency selectivity index higher than 1.0. But bit energy-to-noise ratio greater than a certain size in terms of CC weaving is effective in reducing bit errors. In the results, the defined frequency selectivity index in this study could be applied to evaluate a performance of CC in multipath channel. Also it could effectively reduced BER in a low speed underwater acoustic communication system without an equalizer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.92-98
• /
• 2014

In this paper, the reconfigurable frequency selective surface for C-band was designed using patch array and grid structure. Frequency reconfigurability was obtained by varying the capacitance from varactor diode. From the optimized design parameters, we fabricated the reconfigurable frequency selective surface using the FPCB(Flexible Printed Circuit Board) and commercial varactor diode and measured the frequency reconfigurability for different bias voltage. From the measurement results, proposed structure has the wideband operating frequency of 6.6~7.6 GHz. We can applied this proposed structure to the smooth curved surface like as radome of aircraft or warship.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4
• /
• pp.315-322
• /
• 2003

We propose a channel-attentive Mel frequency cepstral coefficient (CAMFCC) extraction method to improve the recognition performance of speech that is partially corrupted in the frequency domain. This method introduces weighting terms both at the filter bank analysis step and at the output probability calculation of decoding step. The weights are obtained for each frequency channel of filter bank such that the more reliable channel is emphasized by a higher weight value. Experimental results on TIDIGITS database corrupted by various frequency-selective noises indicated that the proposed CAMFCC method utilizes the uncorrupted speech information well, improving the recognition performance by 11.2% on average in comparison to a multi-band speech recognition system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.12
• /
• pp.1007-1010
• /
• 2017

In this paper, a frequency selective surface(FSS) with bandstop operation for radio-frequency spectrum management is presented. The proposed FSS is composed of patterns of fractal-based miniaturized unit cells for stable performance for angles of incidence and polarizations. For practical applications requiring high productivity and environmental compatibility, we fabricated a film-type FSS by screen-printing using Ag ink, rather than a conventional manufacturing method using a printed circuit board. To validate this study, we measured the transmission characteristics of the proposed FSS using the free-space measurement method, and observed the received strength of signal penetrating the FSS film applied to a wall.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.63-71
• /
• 2005

This paper proposes the channel estimation method robust to severe frequency selective fading channels in O%M system using wide bandwidth for the high data rate transmission. DDCE, which uses data between the high correlated symbols, is usually used for channel estimation in the slow fading channels. DDCE can get high gains in the non-selective channels. As the bandwidth of system gets wider, it becomes more severe frequency selective fading environments so that the reliability of data becomes lower and error flow is occurred. FE method, this paper proposed, uses the relation between sub-carriers of OFDM in frequency selective fading channels so FE method gets some gains by adapting the power value at a target frequency to the mean value of channel estimated values of adjacent sub-carriers. Because FE uses only preamble unlike DDCE using data, it is independent of data rate related to the reliability of data and the number of multipath. Consequently, FE can obtain considerable gains in the wideband systems where the errorflow of DDCE is occurred, and FE is applicable to frequency selective fading environments.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.328-334
• /
• 2012

In this paper, we analyzed the electromagnetic characteristics of the spherical frequency selective surface with different arrangement of crossed dipole slot elements for reducing the RCS(radar cross section). The three dimensional MOM(method of moment) with RWG basis is used to analyze the proposed structure. To reduce the simulation time, we applied the BiCGSTab(Biconjugate Gradient Stabilized) algorithm as an iterative method and presented the comparison results with Mie's theoretical results for PEC sphere to show the validity of this paper. From the simulation results, the different arrangement of elements array showed the difference RCS that cannot be negligible. The arrangement method of element in frequency selective surface will be one of variables for the design of curved frequency selective structures.

• Composites Research
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2011

In this paper, Particle Swarm Optimization(PSO) is applied to the design of the Frequency Selective Surface(FSS) and residual stresses of hybrid radome is predicted. An equivalent circuit model with Square Loops arrays was derived and then PSO was applied for acquiring the optimized geometrical parameters with proper resonant frequency. Residual stresses occur in the FSS embedded composite structures after cocuring and have a great influence on the strength of the FSS embedded composite structures. They also effect transmission quality because of delamination. Therefore, the thermal residual stresses of FSS embedded composite structures were analyzed using finite element analysis with considering the effects of FSS pattern, and composite stacking sequence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.225-234
• /
• 2008

Orthogonal Frequency Division Multiplexing (OFDM) systems utilizing direct conversion receiver suffer from frequency selective (FS) and frequency independent (FI) phase and gain imbalances caused by imperfect local oscillator and low pass filter. In this paper, we analyze the impacts of the transmit/receive IQ imbalances on the system and propose the estimation and compensation schemes for those imbalances. The preamble signals coded by Alamouti scheme in the frequency domain could be used in the estimation of relatively large IQ imbalances with FS and FI characteristics and the estimation results are used for the compensation of distortions caused by the FI and FS IQ imbalances. The optimal maximum likelihood (ML) receiver or suboptimal ordered successive interference cancallation (OSIC) receiver utilizing the estimation results show symbol error rate (SER) performance improvement compared to zero-forcing (ZF) technique due to diversity gain inherent in the frequency domain IQ imbalances combined with the frequency selective channels.