• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.341-345
• /
• 2003

ZnWO$_4$shows excellent frequency selectivity due to its high quality factor(Q${\times}$f) at microwave frequencies. However, in order to use ZnWO$_4$as multilayered wireless communication components, its other properties such as sintering temperature(105$0^{\circ}C$). $$\tau$_f$(-70ppm/$^{\circ}C$) and $$\varepsilon$_r$(15.5) should be modified. In present study, TiO$_2$and LiF were used to improve the microwave dielectric and sintering properties of ZnWO$_4$. TiO$_2$ additions to ZnWO$_4$changed $\tau$$_{f}$ from negative to positive value, and also increased $$\varepsilon$_r$, due to its high $$\tau$_f$(＋400ppm$^{\circ}C$) and $$\varepsilon$_r$(100). At 20 mol% TiO$_2$ addition, $$\tau$_f$was controlled to near zero ppm/$^{\circ}C$ with $$\varepsilon$_r$=19.4 and Q${\times}$ f=50000GHz. However, the sintering temperature was 110$0^{\circ}C$. LiF addition to the ZnWO$_4$＋TiO$_2$ mixture greatly reduced the sintering temperature from 110$0^{\circ}C$ to 85$0^{\circ}C$ due to liquid phase formation. Also LiF addition decreased the $$\tau$_f$value due to its high negative $$\tau$_f$ value. Therefore, by controlling the TiO$_2$and LiF amount. temperature stable LTCC(Low Temperature Cofired Ceramics) material with low loss in the ZnWO$_4$-TiO$_2$-LiF system could be fabricated.d.d.

• The Journal of the Acoustical Society of Korea
• /
• v.4 no.3
• /
• pp.47-52
• /
• 1985

한국 연안에서 높게 보고되고 있는 수중소음의 소음원을 규명하기 위하여 해상교통량 변화에 따 르는 소음 수준의 변화를 2KHz 이하에서 관측하였다. 100Hz 부근의 소음은 이미 잘 알려진대로 선박에 기인함이 실험결과에서 드러났지만, 그 수준은 100~110dB로 높게 관측되었다. 더욱이 관측선으로 부터 의 거리변화율이 심한 근거리에 다수의 선박들이 분포해 있을 때 10분 간격의 소음 변화는 특히 1KHz 이상에서 최고 10 dB까지 변화를 보였다. 이것은 연근해의 밀집해 있는 선박들이 이 주파수대에서도 하 나의 소음원으로서 작용함을 의미한다.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.295-302
• /
• 2016

Underwater acoustic communication channel is often defined as a multipath fading channel since the multipath arrivals from various paths interfere with each other and cause frequency dependent constructive or destructive interference in received signals. Therefore signal-to-noise ratio (SNR) of received signal fluctuates as a function of frequency. In addition, sea surface fluctuation induces frequency dependent time variant signal fading due to coherent component variation of surface bounce path. The frequency shift keying (FSK) system is known to be less sensitive and more robust under these interference and fading, and M-ary frequency shift keying (MFSK) system is adopted to increase a data rate. In this study, a bit error rate (BER) of 4 channels 4FSK system are examined in shallow sea multipath channel. Experimental results show that RS code reduces efficiently the BER of 4FSK system since frequency dependent time-varying fading is characterized to give burst errors. The BER of a different data rate or different source-to-receiver range depends on not only the channel coherent bandwidth but also frequency dependent multipath fading.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.4
• /
• pp.237-243
• /
• 2012

Sound absorption capability and anatomical features of the organosolv pretreated Japanese larch and yellow poplar wood were estimated by stereoscopic observation and two microphone transfer function method. Sound absorption capabilities of organosolv treated wood, in the entire estimated frequency range (50~6,400 Hz), were higher than those of control specimen. Especially, the treated wood's absorption capabilities measured in the frequency range of 2~4 kHz were about two times higher than those of control specimen. By the organosolv pretreatment (at $70{\sim}120^{\circ}C$), the weight loss of wood occurred in less than 1% of total weight of wood and the porosity of wood increased slightly. In addition, it was presupposed that microstructural changes of wood occurred during organosolv pretreatment and this structural changes cause the increasing of the sound absorption capability of wood.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.48-55
• /
• 2018

The purpose of the present study is to compare the reduction rate of natural frequency and the increase rate of damping parameter with structural damage in system. For this purpose, experiment and numerical simulation analysis are performed for the 2-span H-Beam with lower natural frequency and higher damping parameter from free vibration in structure. The response signal by impact load before and after damage is analyzed at 14 locations. The response signals for all locations are performed fast fourier transform to estimate the natural frequency reduction rate and wavelet transform to estimate the damping parameter increase rate. The time domain function corresponding to each scale(frequency) is separated from the response signal by wavelet parameter. The estimation of damping parameter increase rate using wavelet transform is more sensitive than the estimation of natural frequency reduction rate in structure.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1175-1179
• /
• 1999

The rheological properties of highly filled epoxy molding compound(EMC) for semi-conductor encapsulants are greatly affected by the content of filler loaded. In this study, the change of viscosity of EMC for semi-conductor encapsulants with the filler content was investigated. Also, both of Cox-Merz and modified Cox-Merz equations were applied to convert the viscosity change as a function of frequency to that of shear rate. It was ovserved that shear thinning and yield stress occured at high filler contents and that the Cox-Merz equation could not be applied at high filler contents because of the difference of viscosity according to the various strains. When the modified Cox-Merz equation was applied, the all the curves having different strain tend to be represented by one master curve, even though some deviation was obseved at high filler content and strain.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.879-886
• /
• 2003

Agile frequency synthesizers are the common device used for commandable, wide-band frequency hopping in frequency-hopped (FH) communications. In this paper, synthesizer phase transient effect and its compensation methods in an FH/FSK(Frequency Hopped Frequency Shift Keying) system are studied. Models for these analysis are developed and resulting performance degradations are computed. The basic PLL is difficult to implement for fast frequency hopping in narrowband radio communication systems. To solve this problem, digital frequency synthesizer/CPM (Continuous Phase Modulation)modulator is proposed. And it's performance is analyzed theoretically. The analysis show that fast frequency hopping is possible in frequency hopping system that use digital frequency synthesizer/CPM modulator.

• The Journal of Information Technology
• /
• v.5 no.2
• /
• pp.69-80
• /
• 2002

Conventionally, we have used an acoustic microscope at single operating frequency. The resolution and quality of the measured images are determined by transducer of the microscope. In this paper, we have studied Vertical Resolution Enhancement with Acoustic Reflection Microscope using combining bases of support for SFR(Spatial Frequency Response). Increased Vertical resolution can be obtained by taking three-dimensional images at more that one frequency and numerically combining the results. As results of the experiment, we could get enhanced images with the rate of contrast in proportion to the changing rate of depth.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.250-251
• /
• 2017

본 논문에서는 ZVT 인터리브드 양방향 LDC의 순환전류 손실 저감을 위한 스위칭 주파수 변조 기법을 제안하였다. 제안된 컨버터 회로는 ZVT 동작을 수행하기 위해 보조 인덕터 전류가 부하 전류보다 커야하는 조건이 필요하다. 하지만 부하전류 변화에도 불구하고 보조 인덕터 순환전류는 변하지 않고 같은 값을 유지하는 문제점이 있다. 따라서 부하 전류가 감소함에 따라 도통 손실이 발생하여 컨버터의 효율이 감소한다. 이러한 문제점을 해결하기 위해 부하 전류와 시비율에 따른 최적의 주파수 값을 적용하여 보조 인덕터 순환 전류의 크기를 변화시켰다. 따라서 도통 손실을 저감시켰고 컨버터의 전반적인 효율이 증가함을 확인하였다. 본 논문에서 제안된 기법은 실험을 통해 검증되었다.

• The Journal of Engineering Geology
• /
• v.13 no.4
• /
• pp.405-418
• /
• 2003

Measurements of volumetric water content and saturation of porous media are very important factors in understanding the physical characteristics of soil, groundwater recharge by rainfall, pollutant movement, and slope failure. To measure such physical parameters, a permittivity method using electromagnetic wave is applied and use is made of the special permittivity response of understand to water and ethanol. In particular, the estimation is required because permittivity is influenced by the nature of the underground environment. In this study, we carried out experiments on the relative dependency of soil density, temperature and salinity of standard sand and granitic weathered soil using FDR-V system (Frequency domain reflectometry with vector network analyzer) within a frequency range of 1 - 18 GHz. The results of the study showed that the dielectric constants of standard sand and granitic weathered soil increased with increased volumetric water content of soil. However, the dependency of soil density was found to be a little low. Changes of dielectric constant with temperature appeared definitely in the real part of 1 GHz. That is, the dielectric constant of real part at 1 GHz of water and standard sand increased with the rise of temperature. However, ethanol showed decreased tendency. The study also showed that dielectric constant increased with increase in salinity at imaginary part of 1 GHz. It could be concluded from this study FDR-V system can adequately measure the physical properties of soil and the degree of salinity concentration of porous media within 1 GHz frequency range using dielectric constant.