• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.22-23
• /
• 2002

Titanium은 높은 강도, 낮은 밀도, 부식에 대한 저항 등, 타 금속에 비해 월등히 뛰어난 성질을 가지고 있기 때문에 산업 전반에 거쳐 그 응용이 크게 증가하고 있으며, 특히 고온에서의 응용이 중요성을 띠게 됨에 따라 고온으로의 상전이 관계에 따른 구조적 규명이 필요하다. 순수한 titanium은 상온에서 조밀충진 육방정계의 α-상구조(a=2.953Å, c=4.683 Å, P6₃/mmc)를 이루고 있으나, 대략 880℃ 이상에서는 β-상의 체심입방정계 (a=3.320Å, Im3m)로 상전이가 되는 것으로 알려져 있다. 이에 대한 대부분의 연구가 kinetics와 thermodynamics에 관련되어 있으며, TEM을 이용한 직접가열실험은 거의 전무한 상태이다. 본 실험에서는 TEM 직접가열을 통하여 titanium의 고온에서의 상전이와 가열시 발생할 수 있는 산화층 형성을 연구하였다. TEM 시편은 순도 99.94％의 titanium foil(Alfa Aesar, ＃00360, 0.025mm thick)를 이용하였고, 분석 장비로는 에너지여과 기능이 있는 TEM(EM912 Omega, Carl Zeiss)과 Gatan사의 double-tilt heating holder를 사용하였다. Titanium의 상전이를 관찰하기 위해 900℃ 까지 분당 10℃ 의 속도로 가열을 하였다. 통계적 분석 오차를 줄이기 위해 서로 다른 4군데의 관찰영역을 선택하여, 상온 - 600℃ - 900℃ - 상온의 단계별로 회절패턴을 관찰 및 기록하였고, 발생 가능한 산화에 대해서는 동일한 장비를 사용하여 EDS 분석을 하였다. 상온에서의 서로 다른 영역의 회절패턴들은 결함의 존재에 상관없이, 온도가 증가함에 따라 그 결함수가 증가하게 된다. 특히 600℃ 에서는 쌍정과 관련된 회절점들이 본래의 회절점 주위에 형성되어있지만, 각 면들의 격자상수의 변화는 나타나지 않았다. 그러나 900℃ 에서는 쌍정에 의한 회절점의 수가 증가하며, 회절점 사이에 발달한 뚜렷한 막대모양의 강도분포와 격자상수의 변화를 관찰할 수 있었다. 다시 상온으로 냉각시킨 후 관찰한 각각의 회절패턴에서는 격자 상수의 감소와 함께 900℃에 보여진 막대 모양의 강도분포와 쌍정에 의한 회절점들이 여전히 남아있었다. EDS분석 결과 가열 실험을 통해 시편이 열적 산화가 되어 있음을 확인 할 수 있었다. 순수한 titanium의 α-상에서 β-상으로의 상전이를 파악할 수 있는 격자상수의 변화자체는 매우 작은 값이기 때문에 상온과 900℃ 에서 기록된 전자회절패턴 상에서의 면간거리와 면간각도의 측정만으로는 상전이 여부를 명확히 구별할 수 없었다. 그러나, 결함에 의한 상변화가 900℃ 에서 심하게 관찰되어지는 것은 상전이와 관계가 있는 것으로 볼 수 있다. 고온에서 상온으로의 가역적 반응을 관찰할 수 없었던 이유는 열적산화로 생긴 산화층의 산소원자들이 고온의 상전이 과정 중에 Ti 원자와 반응이 일어나 TiO/sub X/ 구조로 전이되었기 때문으로 추정하고 있다.

• Journal of KIISE:Software and Applications
• /
• v.31 no.12
• /
• pp.1684-1690
• /
• 2004

This paper presents a method for classifier selection that uses distribution information of the training samples in a small region surrounding a sample. The conventional DCS-LA(Dynamic Classifier Selection - Local Accuracy) selects a classifier dynamically by comparing the local accuracy of each classifier at the test time, which inevitably requires long classification time. On the other hand, in the proposed approach, the best classifier in a local region is stored in the FSA(Feature Space Attribute) table during the training time, and the test is done by just referring to the table. Therefore, this approach enables fast classification because classification is not needed during test. Two feature space attributes are used entropy and density of k training samples around each sample. Each sample in the feature space is mapped into a point in the attribute space made by two attributes. The attribute space is divided into regular rectangular cells in which the local accuracy of each classifier is appended. The cells with associated local accuracy comprise the FSA table. During test, when a test sample is applied, the cell to which the test sample belongs is determined first by calculating the two attributes, and then, the most accurate classifier is chosen from the FSA table. To show the effectiveness of the proposed algorithm, it is compared with the conventional DCS -LA using the Elena database. The experiments show that the accuracy of the proposed algorithm is almost same as DCS-LA, but the classification time is about four times faster than that.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.419-429
• /
• 1998

This study was carried out in order to study early histologic changes and repair reaction appling to extrusive force for 3rd premolar of adult dogs. After 1 week of extrusive force with elastic chain, one of dogs was sacrified and after 3 weeks retention period, another dog was sacrified. The paraffin sections of samples were stained with Hematoxylin - Eosin and Masson's Trichrome and were examed by light microscopy . The obtained results as follows 1. In Hematoxylin - Eosin and Masson Trichrome stain of control group , the periodontal ligament width was constant from apical third to cervical third of the root and periodontal fiber arrangement was horizontal or oblique in cervical third. oblique in middle third, oblique in apical third of root. in alveolar bone, smooth appearance was shown 2. In Group 1, all periodontal fiber arrangement was oblique toward tooth, and the periodontal ligament width increased Partially PDL was ruptured in apex. In MT stain, immature bone formation was seen at alveolar crest area. Active bone formation was observed along the one side of alveolus, and apical portion of pulp was involved with blood vessel rupture , vacuolization of pulp tissue and hyperemia 3. In Group 2, most periodontal ligament arrangement and PDL width was repaired and fiber density increased. In MT stain, mineralization of immature bone on the alveolar crest was progressed. In pulp, vacuole and hyperemia was diminished and fibrotic change was diminished 4. After 3 week periodontal ligament has more repair ability than pulp tissue. pulp was involved with vacuolization and fibrosis, so it takes more time for repair.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.2
• /
• pp.264-279
• /
• 1997

Background : To analyze the morphologic characteristics of low density lymph node in etiologic differentiation of lymphadenopathy, emphasizing the different features between tuberculosis and lung cancer, on contrast enhanced CT scan. Method : A total of 64 patients who showed low density lymph nodes on chest CT scan were analyzed. Primary causes were tuberculosis (n=28), lung cancer (n=27), malignant lymphoma (n=5) and metastasis from extrathoracic malignancies (n=4). CT scan was performed with 10mm slice thickness and 7 characteristic features were evaluated : location, size, presence or absence of the nonnecrotic lymph node, calcification, perinodal fat obliteration, thickness and evenness of the enhancing rim. Results : In patients with tuberculous lymphadenopathy, lymph nodes with uneven (68.0%) and thick (62.1%) enhancing rim were more common than lung cancer (p<0.05). Low density lymph nodes with less than 1 cm in size were found only in tuberculous lymphadenopathy(n=10). In 48.2% of patients with lung cancer, more than 1 nonnecrotic enlarged lymph node were coexisted, whereas 21.4% in patients with tuberculous lymphadenopathy(p=0.06). However, the size, location and calcification were not statistically significant between tuberculous lymphadenopathy and lung cancer. Conclusion : Tuberculous lymphadenopathy is strongly suggested when enhancing rim of enlarged lymph nodes is uneven and thick, when the coexisting nonnecrotic lymph nodes are few in number and when central low density is encountered in normal sized lymph nodes.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.4
• /
• pp.46-54
• /
• 1994

Exhbitlon hghting design be done aftrr due consideration of the photochermcal reaction and h ~ ~ i i tc~.fficits~ upn exposure to light. In this study the balanced judgement is as follows. The most light-susceptible material shouid be illu~stratrui less than 50[k] (illurnlnance-hours per year : 120, 000k.h)and the illuminance of moderately sensitive rriatcrinl k 200[1x] (illuminance hours per year : 480, 0001x.h). Moreover to minimize damage the sources of light shoulcl not only contribute as little as heat possible but remove ultraviolt radiation by filters. Also the sources of light must have good color rendering and low color temperature.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.858-861
• /
• 2012

Distributed sensor nodes for environmental monitoring, have a problem of difficult and expensive battery change. In this case, renewable energy such as solar energy is helpful. We can use high-quality solar energy everyday. In this paper, we model photovoltaic energy prediction model for sensor nodes, which includes charge and discharge characteristics as well as seasonal and monthly characteristics of the solar energy. Our model is useful to predict energy consumption of solar-powered sensor nodes realistically using real world use data of the nodes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.190.1-190.1
• /
• 2010

풍력자원평가를 위해 풍력단지 개발대상지의 국지풍황 대표지점에 설치하는 풍황탑(met-tower 또는 풍황마스트; met-mast)은 모노폴(monopole), 삼각단면 트러스 또는 사각단면 트러스 구조를 갖는다. 풍향계 및 풍속계는 이러한 지지구조물에 의한 풍속의 교란 또는 차폐영향을 최소화하기 위하여 긴 붐(boom)의 끝단에 설치되지만 계측기가 풍황탑의 직후방 후류영역에 놓이게 될 경우 차폐영향을 완전히 피하기는 어렵다. 저자들의 선행연구에 따르면 풍황탑 차폐영향은 평균풍력밀도의 경우 2.5% 이상의 오차를 유발할 수 있으므로 풍력자원평가 시 필히 고려되어야 할 불확도 요인인 것이다. 이에 한국에너지기술연구원에서는 풍황탑 주위의 대기유동장을 전산유동해석을 이용하여 차폐영향의 정도를 정량적으로 수치모사함으로써 이를 보정하는 기술을 개발한 바 있다(현재 특허심사 중). KIER-$ShadeFree^{TM}$는 이 특허기술을 프로그램화 한 것으로, 시범적으로 다수의 풍황탑 풍력자원 측정자료에 적용하여 상당한 보정효과에 의한 풍력자원평가의 정확도 향상효과를 볼 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.12 s.255
• /
• pp.1218-1227
• /
• 2006

In this paper a parametric study using an immersed boundary method has been carried out to investigate the effects of stable density stratification on the wakes past two identical three-dimensional hills aligned in tandem. The Reynolds number based on the uniform inlet velocity and twice the hill height was fixed at Re=300 while the Froude number based on the inlet velocity and the hill height was retained at Fr=0.2. Neutral flow without density stratification was also computed for comparison. Under a strong stratification, vertical motion of fluid particles over the three-dimensional hills is suppressed and the wake structures behind the hills become planar. Depending on the distance between the two hills, the flow pattern of each wake is significantly affected by the stratification. There is a critical hill distance at which flow characteristics drastically change. Qualitative and quantitative features of the wake interaction are reported.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.116-121
• /
• 1997

The optical power drift due to temperature variation of a laser diode driven by constant voltage is different from one driven by constant current. When a laser diode is driven by constant current, the optical output decreases as the temperature increases because the population inversion decreases. However, When it is driven by constant voltage, injection current increases with temperature rise, which in turn increases the optical power. As the result, the optical power variation reduces. Experimental results show that when these two components are almost equal and cancel each other, the optical power variation coefficient is very small and the optical output is stable.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.3
• /
• pp.18-24
• /
• 2005

Wave overtopping is one of the most important processes for the design of seawalls. The term "wave overtopping" is used here to refer to the processes where waves hit a sloping structure run up the slope and, if the crest level of the slope is lower than the highest run up level, overtop the structure. Wave overtopping is dependent on the processes associated with breaking wave. A numerical model based on Navier-Stokes equation and the Marker-density function for predicting wave overtopping of coastal structures is developed in this paper. In order to evaluate the present model, two simulations are tested. One is overflow without waves at vertical seawall, and the other is wave overtopping at sloping seawalls.