• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.1
• /
• pp.28-31
• /
• 2016

Purpose $^{223}Ra-Dichloride$ is used for the medicine of castration-resistant prostate cancer (CRPC) and which emits ${\alpha}-ray$ of 28 Mev that is used for therapy. However $^{223}Ra-Dichloride$ emits ${\beta}-ray$ of 3.6% and ${\gamma}-ray$ of 1.1%(80,156,270 keV) aside from ${\alpha}-ray$ in decay. Therefore we would like to evaluate external radiation expose dose rate of ${\gamma}-ray$ of $^{223}Ra-Dichloride$. Materials and Methods We calculated external radiation expose dose rate using ${\gamma}-constant$ of $^{223}Ra-Dichloride$, $^{99m}Tc$ based on Health physics(2012). $^{223}Ra-Dichloride$ of 3.5 MBq and $^{99m}Tc-MDP$ of 740 MBq were applied. external radiation expose dose rate 15 times from 1m by survey meter. Results ${\gamma}-contant$ of $^{223}Ra$, $^{99m}Tc-MDP$ from 1m distance based on Health physics(2012) is 0.0469, 0.0215. calculated value of external radiation expose dose rate was $16{\mu}Sy$, $34{\mu}Sy$ which activity is $^{223}Ra-Dichloride$ of 3.5 MBq and $^{99m}Tc-MDP$ of 740 MBq from 1 m and measured mean value of 1 m was $0.7{\mu}Sy/h$, $18{\mu}Sy/h$. Conclusion ${\gamma}-constant$ of $^{223}Ra$ is higher than $^{99m}Tc$ based on Health physics(2012). however calculated maximum external radiation expose dose rate of $^{223}Ra-Dichloride$ is lower than $^{99m}Tc$ due to actually used quantity of activity of $^{223}Ra-Dichloride$ is small. measured value of $^{223}Ra-Dichloride$ is also lower than $^{99m}Tc-MDP$. Therefore external radiation expose dose rate of ${\gamma}-ray$ of $^{223}Ra-Dichloride$ is very low.

• Journal of fish pathology
• /
• v.8 no.2
• /
• pp.119-134
• /
• 1995

To induce an overpopulated melanomacrophage centers(MMCs) within spleen and kidney in tilapias, two methods were applied through the intraperitoneal inoculation of V. anguillarum FKC with a repeated dose of saline(the 1st induction group), and of colloidal carbon (the 2nd induction group). In the 1st group, both number and size of MMCs were slightly increased in spleen and head kidney. However in the 2nd group the two hemopoietic tissues were nearly occupied with quite a large number of MMCs. Regardless of induction groups, many of MMCs were confined within the walls of blood vessels in the spleen. Especially in the 2nd group, the MMCs without fibrous capsules often had concentrically or eccentrically located, thin-walled lumens of vessels, which strongly suggests to be ellipsoids. In head kidney, nearly all MMCs were located within or just around the lymphocytic areas but the precise relationship to blood vessel wall was not obvious. Despite of such overpopulated MMCs, no histopathological degenerative findings in hemopoetic parenchymas of both organs were recognized. To evaluate the effect on defensive function, tilapias of the 2nd group were challenged with E. tarda. Susceptabilities to E. tarda were never increased but rather significantly decreased compared to control. Weekly antibody titres in sera were determined for all induction groups, in which the titres in the 1st and 2nd groups were 4 or 8 times higher than in the control, and then remained high until the 4th week. Also with the hemopoietic function, cellular compositions of peripheral blood were analyzed at weekly intervals but no significant changes resulted. From those results, it is suggested that overcrowding of MMCs would not lead to any morphological as well as functional deteriorations of spleen and head kidney but have an intimate association with enhancement of protective immune system in tilapias.

• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.337-350
• /
• 1990

A post-irradiation annealing study was conducted with use of reactor pressure vessel(RPV) steel A533B Cl.1 base metal irradiated to a dose of 4.84$\times$10$^{18}$ n/$\textrm{cm}^2$ at about 38$0^{\circ}C$. Microhardness and positron annihilation (PA) methods were used to obtain better understanding of the recovery of radiation hardening. Isochronal anneal experiments indicated that two recovery processes occur during annealing of irradiated specimens. The first recovery process occurs in the temperature range of 280-3O5$^{\circ}C$, Michrohardness and positron annihilation (PA) methods were used to obtain better understanding of the recovery of radiation hardening. Isochronal anneal experiments indicated that two recovery processes occur during annealing of irradiated specimens. The first recovery process occurrs in the temperature range of 280-305$^{\circ}C$. The variations of Ip, Iw and R parameters indicated that the formation of vacancy clusters by vacancy agglomeration and the annihilation of monovacancies are the first recovery process. The second recovery process occurs in the range of 405-49$0^{\circ}C$ and positron annihilation parameters measured indicated that the dissolution of carbon atoms decorated around vacancy-type defects and possible precipitates, and the annihilation of monovacancies give rise to the second recovery process. It was further indicated that radiation anneal hardening (RAH) in the range of 305-405$^{\circ}C$ between the temperature ranges for the two processes occurs due to the formation of carbon-decorated vacancy clusters and precipitates. The activation energies, orders of reaction and other characteristics of recovery processes were determined by the Meechan-Brinkman method. The activation energy for the first recovery process was determined as 1.76 eV and that for the second recovery process as 2.00eV. These values are lower than those obtained by other workers. This difference may be attributed to the lower copper content of the RPV steel used in the present study. The order of reaction for the first recovery process was determined as 1.78, while that for the second recovery process as 1.67 Non-integer orders of reaction for recovery processes seem to be attributed to the fact that several mechanisms for the first order and the second order of reaction are compounded in one process. This result also supports for the above conclusions from measurements of PA parameters.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1979.05a
• /
• pp.4.4-5
• /
• 1979

The degree of hearing impairment of chronic otitis media will indicate the nature and severity of middle ear pathology especially condition of ossicular chain, size of ear drum perforation and location of granulation tissue in the middle ear cavity. The subjects were 189 ears of tympanoplasty for chronic otitis media and divided into four groups as follows: Normal ossicular chain with only ear drum perforation (group I), normal ossicular chain with granulation tissue only around the ossicles regardless of any other region (group II), ossicular ankylosis or fixation of handle of malleus to promontory with or without granulation tissue around the ossicle (group III) and ossicular interruption by partial or complete destruction(groupf IV). The results were concluded as follows: 1) The average hearing threshold of chronic otitis media was 44.6 dB and hearing threshold was closely related to the condition of ossicular chain. Hearing threshold became greater in order of normal ossicular chain, ankylosis and interruption. 2) The average hearing threshold of ossicular interrupted group was 49.1 dB and it was greater in the cases of total destruction than that of partial destruction. 3) The hearing loss in the cases of normal ossicular chain with only tympanic membrane perforation was within 45 dB and this level was presumed to represent normal ossicular function. The degree of hearing loss was in proportion to the size of ear drum perforation and when over 45 dB, other middle ear pathology was suggested. 4) In the cases of small ear drum perforation with normal ossicular function, the hearing threshold was within 30 dB. 5) In the type of audiogram, flat type was 30.2% and ascending type 35.4%. Descending type was more frequent in the cases of normal ossicular mobility with granulation tissue around the ossicle and flat type was observed frequently in the cases of ossicular ankylosis. 6) Carhart's notch was seen in 14 cases (7.4%) and observed mainly in ossicular ankylosis. 7) There was no relation between hearing threshold and histopathological type of granulation tissue in chronic otitis media. However the degree of hearing impairment was related to the location of granulation tissue in the middle ear cavity. 8) Authors recognized the granulation tissue compensated the function of interrupted ossicular chain.

• Clean Technology
• /
• v.2 no.1
• /
• pp.96-108
• /
• 1996

$NO_x$ is mainly emitted from mixed acid pickling process in the stainless industry and its impact to the environment has been worried over. This study which may be considered as one of the development of clean technologies, differing from the traditional end pipe technology is about how to reduce $NO_x$ emission through the modification of corresponding process. This study consists of two parts. First, the influence of various reaction parameters in a acid pickling process on $NO_x$ emission was investigated. Second, the influence of hydrogen peroxide on $NO_x$ formation, which is known as inhibitor of $NO_x$ emission, was investigated. Major findings in this study are as follows. The important reaction parameters which have a great influence on $NO_x$ emission are the reaction temperature and the concentration of fluoric acid. The concentration of nitric acid, some of which results in $NO_x$ compound is not as important as the concentration of fluoric acid. Synthetic mixed acid of nitric acid and fluoric acid itself in absent of pickling plate contributed the $NO_x$ emission, however, its impact was negligible in terms of quantity. The addition of hydrogen peroxide to the acid pickling process significantly contributed to the reduction of $NO_x$ emission and successfully achieved 80% reduction of $NO_x$ emission at the condition of $9.51{\times}10^{-2}mole\;hydrogen\;peroxide/m^2$ pickling area. This result was compared to literature value from Avesta steel process, indicating a sixth of hydrogen peroxide addition of Avesta's in achieving a same amount of $NO_x$ reduction. The region of the economic hydrogen peroxide addition per unit area of plate to be pickled from the result of this study was established.

• Journal of the Korean earth science society
• /
• v.23 no.4
• /
• pp.357-368
• /
• 2002

In this study we have tried to explain the barrel-shaped morphology for young supernova remnants considering the dynamical effects of the ejecta. We consider the magnetic field amplification resulting from the Rayleigh-Taylor instability near the contact discontinuity. We can generate the synthetic radio image assuming the cosmic-ray pressure and calculate the azimuthal intensity ratio (A) to enable a quantitative comparison with observations. The postshock magnetic field are amplified by shearing, stretching, and compressing at the R-T finger boundary. The evolution of the instability strongly depends on the deceleration of the ejecta and the evolutionary stage of the remnant. the strength of the magnetic field increases in the initial phase and decreases after the reverse shock passes the constant density region of the ejecta. However, some memory of the earlier phases of amplification is retained in the interior even when the outer regions turn into a blast wave. The ratio of the averaged magnetic field strength at the equator to the one at the pole in the turbulent region can amount to 7.5 at the peak. The magnetic field amplification can make the large azimuthal intensity ratio (A=15). The magnitude of the amplification is sensitive to numerical resolution. This mens the magnetic field amplification can explain the barrel-shaped morphology of young supernova remnant without the dependence of the efficiency of the cosmic-ray acceleration on the magnetic field configuration. In order for this mechanism to be effective, the surrounding magnetic field must be well-ordered. The small number of barrel-shaped remnants may indicate that this condition rarely occurs.

• Korean Security Journal
• /
• no.27
• /
• pp.129-159
• /
• 2011

Physical security has always been an extremely important facet within the security arena. A comprehensive security plan consists of three components of physical security, personal security and information security. These elements are interrelated and may exist in varying degrees defending on the type of enterprise or facility being protected. The physical security component of a comprehensive security program is usually composed of policies and procedures, personal, barriers, equipment and records. Human beings kept restless struggle to preserve their and tribal lives. However, humans in prehistoric ages did not learn how to build strong house and how to fortify their residence, so they relied on their protection to the nature and use caves as protection and refuge in cold days. Through the history of man, human has been establishing various protection methods to protect himself and his tribe's life and assets. Physical security methods are set in the base of these security methods. Those caves that primitive men resided was rounded with rock wall except entrance, so safety was guaranteed especially by protection for tribes in all directions. The Great Wall of China that is considered as the longest building in the history was built over one hundred years from about B.C. 400 to prevent the invasion of northern tribes, but this wall enhanced its protection function to small invasions only, and Mongolian army captured the most part of China across this wall by about 1200 A.D. European lords in the Middle Ages built a moat by digging around of castle or reinforced around of the castle by making bascule bridge, and provided these protections to the resident and received agricultural products cultivated. Edwin Holmes of USA in 20 centuries started to provide innovative electric alarm service to the development of the security industry in USA. This is the first of today's electrical security system, and with developments, the security system that combined various electrical security system to the relevant facilities takes charging most parts of today's security market. Like above, humankind established various protection methods to keep life in the beginning and its development continues. Today, modern people installed CCTV to the most facilities all over the country to cope with various social pathological phenomenon and to protect life and assets, so daily life of people are protected and observed. Most of these physical security systems are installed to guarantee our safety but we pay all expenses for these also. Therefore, establishing effective physical security system is very important and urgent problem. On this study, it is suggested methods of establishing effective physical security system by using system integration on the principle of security design about effective security system's effective establishing method of physical security system that is increasing rapidly by needs of modern society.

• Radiation Oncology Journal
• /
• v.29 no.1
• /
• pp.11-19
• /
• 2011

Purpose: To evaluate the pathological and clinical effects of preoperative chemoradiation (CCRT) in cases of locally advanced rectal cancer and to determine the predictive factors for tumor downstaging. Materials and Methods: From March 2004 to August 2008, 33 patients with locally advanced rectal cancer were treated with preoperative CCRT. Twenty-eight patients (84.8%) were treated using a concomitant boost technique while five (15.2%) patients were treated using a cone down boost technique. All patients received 50.4 Gy of irradiation and concurrent chemotherapy with 5-fluorouracil. The median follow-up duration was 24.2 months (range, 9.8 to 64.7 months). Results: Thirty-one (93.9%) patients underwent surgery. Twenty-four patients (72.7%) underwent anal sphincter-preserving surgery. The 3-year disease free survival (DFS) and overall survival rates were 63.4% and 78.8%, respectively. Post-operative factors were more important for DFS. Pathologic N stage, margin status, and pathologic differentiation were significant prognostic factors (p=0.001, 0.029, 0.030). Tumor size and lymphovascular invasion were also associated with marginal significance (p=0.081, 0.073). However, only pre-treatment T stage was a significant pre-operative factor (p=0.018). The complete pathological response rate was 9.1 %. T-downstaging was observed in ten (30.3%) patients, whereas N-downstaging was found in 24 (72.7%) patients. Pre-treatment T stage and the interval between CCRT and operation were the predictive factors for downstaging in a univariate analysis (p=0.029, 0.027). Pre-treatment carcinoembryogenic antigen was also associated with marginal significance (p=0.068). Conclusion: The survival of rectal cancer patients can be better determined based on post-operative findings. Therefore, pre-operative CCRT for downstaging of the tumor seems to be important. Pre-treatment T stage and the interval between CCRT and operation can be used to predict downstaging.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.342-349
• /
• 2019

Purpose: The purpose of this study was to retrospectively investigate the survival and success rate of implant-supported fixed prosthesis according to the materials in the posterior area. Other purposes were to observe the complications and evaluate the factors affecting failure. Materials and methods: Patients who had been restored implant prosthesis in the posterior area by the same prosthodontist in the department of prosthodontics, dental hospital, Chonbuk National University, in the period from January 2011 to June 2018 were selected for the study. The patient's sex, age, material, location, type of prosthesis and complications were examined using medical records. The KaplanMeier method was used to analyze the survival and success rate. The Log-rank test was conducted to compare the differences between the groups. Cox proportional hazards model was used to assess the association between potential risk factors and success rate. Results: A total of 364 implants were observed in 245 patients, with an average follow-up of 17.1 months. A total of 5 implant prostheses failed and were removed, and the 3 and 5 year cumulative survival rate of all implant prostheses were 97.5 and 91.0, respectively. The 3 and 5 year cumulative success rate of all implant prostheses were 61.1% and 32.9%, respectively. Material, sex, age, location and type of prosthesis did not affect success rate (P>.05). Complications occurred in the order of proximal contact loss (53 cases), retention loss (17 cases), peri-implant mucositis (12 cases), infraocclusion (4 cases) and so on. Conclusion: Considering a high cumulative survival rate of implant-supported fixed prostheses, regardless of the materials, implant restored in posterior area can be considered as a reliable treatment to tooth replacement. However, regular inspections and, if necessary, repairs and adjustments are very important because of the frequent occurrence of complications.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.143-151
• /
• 2022

Purpose. The purpose of this study was to evaluate the performance efficiency of two different drill combinations according to the heat generated and drilling time. Materials and methods. In this study, cow ribs were used as research materials. To test the specimen, cow bones were rid of fascia and muscles, and a temperature sensor was mounted around the drilling area. The experimental group was divided into a group using a guide drill and a group using a Lindmann drill according to the drill used before the initial drilling. The drilling sequence of the guide drilling group is as follows; guide drill (ø 2.25), initial drill (ø 2.25), twist drill (ø 2.80), and twist drill (ø 3.20). The drilling sequence of the Lindmann drilling group is as follows; Lindmann drill (ø 2.10), initial drill (ø 2.25), twist drill (ø 2.80), and twist drill (ø 3.20). The temperature was measured after drilling. For statistical analysis, the difference between the groups was analyzed using the Mann-Whitney U test and the Friedman test was used (α = .05). Results. The average performance efficiency for each specimen of guide drilling group ranged from 0.3861 to 1.1385 mm³/s and that of Lindmann drilling group ranged from 0.1700 to 0.4199 mm³/s. The two drill combinations contained a guide drill and Lindmann drill as their first drills. The combination using the guide drill demonstrated excellent performance efficiency when calculated using the drilling time (P < .001). Conclusion. Since the guide drill group showed better performance efficiency than the Lindmann drill group, the use of the guide drill was more suitable for the primary drilling process.