• KOREAN POULTRY JOURNAL
• /
• v.53 no.3
• /
• pp.112-115
• /
• 2021

고병원성 AI가 3년 8개월 만에 찾아와 양계농가의 피해가 커지고 있다. 확산 속도가 빠르고 살처분 규모가 커짐에 따라 차단방역의 중요성이 더욱 강조되는 상황에서 고위험 지역임에도 불구하고 AI는 물론 질병의 여파가 없었던 전북 김재에 위치한 (주)건지농업회사법인을 찾아 그 비결을 물었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.211-219
• /
• 2017

In this study, we performed numerical simulations on a circulating air classifier using a commercial computational fluid dynamics program. The variations in the grade efficiency, the cut-size and the cut-sharpness were calculated and discussed. By controlling the rotating speed of the main fan, the cut-size could be rapidly increased. However the linearity of the cut-size variation with respect to the main fan speed was not sufficient for application to contaminated soil classification processes. On the other hand, by varying the rotating speed of the classifying fan, the cut-size gradually decreased and could be precisely adjusted. Using both the main fan and the classifying fan, we could achieve larger cut-sharpness values and better classifying performances.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.3
• /
• pp.527-539
• /
• 2009

The purpose of this study was to evaluate the influence of ankle joint mobilization on equilibrium ability of supinated foot. Both Joint mobilization group(n=20) and control group(n=20) were measured an equilibrium ability by Balance performance monitor at pre-test, post-test in 2 weeks, post-test in 4 weeks and follow-up test in 2 weeks. The sway area, sway path length and sway maximum velocity of the joint mobilization group were significantly reduced among the experimental period (p<.05). The reduction of sway area, sway path length and sway maximum velocity were significantly different between the joint mobilization group and the control group at in 2 weeks, 4 weeks and follow-up test(p<.05). In conclusion, we were found that ankle joint mobilization could reduce sway area, sway path length and sway max velocity and improve a balance for the individuals with supinated foot.

• Journal of Advanced Navigation Technology
• /
• v.25 no.4
• /
• pp.293-298
• /
• 2021

In general, the guided weapon seeker and the guided control device process the target, search, recognition, and capture information to indicate the state of the guided missile, and play a role in controlling the operation and control of the guided weapon. The signals required for guided weapons are gaze change rate, visual signal, and end-stage fuselage orientation signal. In order to process the complex and difficult-to-process missile signals of recent missiles in real time, it is necessary to increase the data processing speed of the missiles. This study showed the processing speed after applying the stop and go and inverse enumeration algorithm among the parallel algorithm methods of PINQ and comparing the processing speed of the signal data required for the guided missile in real time using the guided missile inspection program. Based on the derived data processing results, we propose an effective method for processing missile data when applying a parallel processing algorithm by comparing the processing speed of the multi-core processing method and the single-core processing method, and the CPU core utilization rate.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.63-73
• /
• 2021

The radar operated to detect/track aircraft targets is divided into a search radar that operates while the antenna rotating device rotates for the purpose of detecting the target according to the mission characteristics, and a tracking radar that periodically steers and tracks a beam to the predicted position of the target. The tracking radar has a shorter target information acquisition preiod than the search radar. Due to this characteristic, the tracking accuracy is better than that of the search radar, but as the prediction error increases due to the speed error at the beginning of the tracking, there are many cases in which tracking fails at the beginning of tracking due to failure to perform beam steering normally. In this paper, in order to solve the above-mentioned problems, we propose an algorithm for improving the accuracy of track initiation using radial velocity measurements in addition to the position of the measured, and confirm the performance of the proposed algorithm by comparing with the two point differential algorithm

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.149-161
• /
• 2022

Because the speed limit affects moving speed, it is closely related to traffic accidents as well as traffic flow. The existing speed limit calculation methods consider various engineering factors such as lanes, intersection spacing, driveways, crosswalks, 85 percentile speed, land uses, and roadway geometric characteristics etc. However, it can be said that the engineering analysis is insufficient because the traffic impact analysis considering traffic volume is not carried out. In addition, only 85 percentile speed, which is the spot speed, does not reflect the characteristics of the traffic flow on the road. In this paper, the effect of the speed limit change on the moving speed and the travel speed was analyzed in detail accordinr to the variation of intersection spacing and traffic volume. And by using the results, we proposed a speed limit calculation method that maintains the same service level as before the speed limit change, thereby increasing the speed improvement effect and reducing the difference between moving speed and travel speed. In addition, a variable speed limit operation method according to the change in traffic volume was also suggested. This method is expected to be effective in terms of safety by reducing the speed difference, which affects the severity of traffic accidents, while securing the speed improvement effect, and increasing the speed limit compliance rate of drivers by operating the speed limit that reflects the speed change due to the variation of traffic volume.

• Journal of Life Science
• /
• v.16 no.1
• /
• pp.114-119
• /
• 2006

The purpose of this study was to determine effects of the Ga-As (Gallium-Arsenide) Dens-Bio laser on mechanically injured sciatic nerves of rats. The improvement of the injured rat sciatic nerve was evaluated by measuring of nerve conduction velocity and amplitude of compound muscle action potential. The sciatic nerves of forty male Sprague-Dawley rats were compressed with hemostatic forceps for 30 seconds. The experimental group was divided into 4 subgroups according to the duration of treatment. Lower power infrared laser irradiation was done transcutaneously to the injured sciatic nerve area, 3 minutes daily to each of four treatment groups for 1, 3, 5, and 7 weeks, respectively. Compound muscle action potential and nerve conduction velocity of sciatic nerve were obtained before nerve injury and at 1, 3, 5, and 7 weeks after injury. There were significant difference of the nerve conduction velocity and amplitudes of compound muscle action potential between the treatment group and non-treatment group at 1, 3, and 5 weeks after laser treatment. However, there were no differences found between the electrophysiologic parameters that were measured after 7 weeks in two groups. There was significant correlation between the increment of compound muscle action potential and nerve conduction velocity after time course according to laser treatment. In conclusion, the low power laser treatment had improved the sciatic nerve function, and therefore these results may provide the basic data to clarify the neurological recovery and treatment after incomplete peripheral nerve injury.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.45-52
• /
• 2005

Displays, playing an essential role in HCI, have been developed to deliver more vivid and live pictures. LCD and PDP have the most common usage among various displays to present the dynamic textual information in restricted and open places. Important and unsolicited information is being provided by hundreds of displays while we don't even perceive the information. Watching context, effective color combinations of the text and background, speeds of presentation, contexts, and types of display for leading method, moving words cross the display from right to left, were investigated with readability, comprehensibility, and overall satisfaction were compared. LCD peformed better than PDP on all comparisons u4th typical text (black, white) and background (white, black) color better than other color combinations. Normal and fast text presentation was believed more preferred when only textual information was given while slower presentation was evaluated more efficient if multimedia contents were presented with textual information.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.176-176
• /
• 2011

환형수조는 점착성 퇴적물의 이송특성 연구를 위해 가장 선호되는 실험 장치로 알려져 있다. 과거 많은 연구자들은 퇴적물의 이송특성, 특히 침식/퇴적 특성 조사를 위해 주로 수로를 이용한 실험적 연구를 수행하였는데, 최초의 실험적 연구들은 주로 직선수조에서 수행되었다. 그러나 입자간의 응집이 중요한 역할을 하는 점착성 퇴적물의 경우에, 직선수조 끝단에서의 자유낙하 및 재순환 펌프의 날개에 의해 응집된 토사가 쉽게 분리될 수 있어 그 타당성이 의문시 되어 왔으며, 이러한 단점을 보완하기 위해 환형수조가 고안되었다. 환형수조는 수면과 접하여 회전하는 상부링의 마찰력에 의해 흐름이 생성되기 때문에 시간의 제약 없이 흐름조건을 동일하게 만들 수 있다는 큰 장점을 갖는다. 그러나 환형수조는 원주유속의 속도차이 및 원심력으로 인한 2차 순환류를 형성시켜 반경 방향(radial direction)에서의 바닥전단응력을 불균일하게 하는 단점을 갖는다. 이러한 2차 순환류와 바닥전단응력의 불균일을 저감시키기 위하여 환형수조의 몸체를 상부링의 회전 방향과 역방향으로 직접 회전시키는 방법이 채택되어져 왔다. 한편, 환형수조의 상부링과 몸체를 서로 역방향으로 동시에 회전시키는 양방향 회전(counter-rotation)의 적용을 위해서는 2차 순환류가 최소가 되며 바닥전단응력이 균일해지는 최적 회전속도비에 대한 분석은 필수적 사항이다. 이를 위하여, 상부링과 몸체의 회전속도에 따라 변화하는 수조내부의 흐름특성 및 평균바닥전단응력에 대한 연구가 선행되어야만 한다. 이에 본 연구에서는 전산유체역학을 이용하여 전북대에 설치된 환형수조의 상부링과 몸체의 회전속도에 따라 변화하는 수조내부에서의 흐름특성 및 바닥전단응력에 대한 분석이 수행되었다. 또한, 이를 기초로, 환형수조의 최적 회전속도비 산출을 위한 연구가 수행 중에 있다. 이러한 결과들은 추후 환형수조를 이용한 점착성 퇴적물의 침식/퇴적 등과 같은 이송특성 연구시, 퇴적물에 작용하는 흐름조건의 정밀산정을 위한 기초자료로 활용될 수 있을 것이다.

• Science of Emotion and Sensibility
• /
• v.12 no.1
• /
• pp.33-44
• /
• 2009

This study investigates differential impacts of the positive and negative content and the interaction with pacing, as a structural feature, on information processing while watching televised video clips with moderately intensive emotional tone. College participants watched six positive messages and six negative video clips lasting approximately 60 seconds. Heart rate was used to index attention and skin conductance was used to measure arousal. After all of the stimuli were shown, the participants performed the free recall questionnaire. The result demonstrates, first, positivity superiority on attention in which participants' heart rates were slower during positive content compared to during negative content. Secondly, negativity superiority was shown on free recall memory as participants remembered positive content better than did negative content. The result also manifests the interaction of emotional valence and pacing as the effects of pacing were less for the negatively emotional content compared to those for the positively emotional content. It is suggested that future studies should examine further about the differential and independent functions of positive and negative contents on information processing and the potential interaction with formal features.