• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.359-366
• /
• 2012

Today, people are exposed to the various noisy environments, such as in the buses, subway and supermarkets where there are a lot of people. The noise issue is getting more serious as people want to use portable sound equipment and mobile phones even under this noisy condition. People want to use the portable equipment to exchange the information freely and they set the volume as 15dB higher than the noise around them, which almost reach at 110 dB. That amount of sound can cause noise induced deafness to the users and another issue to the others as additional noise source. A Bone-conduction system can be a solution to reduce noise and enhance voice signal of mobile phone. In this paper, we propose the way of cancelling noise and enhancing speech signal of mobile phones, by installing bone-conduction feedback system with ordinary mobile phones. With this system, we can reduce the environment noise and enhance the voice quality of mobile phones. Using this method, we can enhance the signal by around 17 dB.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.83-90
• /
• 2019

LED lighting is spreading on the strength of LED lighting, and various government policies are being implemented. VLC research which is a wireless communication technology using lighting has been actively conducted, and it has been proven through many studies that a general LED light source such as a high-speed data transmitter can be used. But from now on, one of the main problems is the noise from side lights, which can be compared to the noise of radio broadcasts. So in this paper, we proposed a noise canceling model to remove the interference of ambient light by using an optical filter for a detachable VLC channel. In order to verify the proposed model, various high brightness RGB LED modules were used for comparative analysis. In addition, the applicability was verified through experiments using High Luminance LED lighting which is applied in real life.

• Journal of Korean Society of societal Security
• /
• v.2 no.3
• /
• pp.39-46
• /
• 2009

A small loop-loop multi-frequency electromagnetic(EM) induction method is a useful technique to map a resistivity distribution efficiently and non-destructively. However, for quantitative interpretation and depth sounding, the quality of measured data is crucial. In this paper, we propose a bias correction of measured data by using background noise measurements to obtain reliable data, and propose an evaluation technique of apparent that can provide a resistivity image easily. We have performed small loop-loop EM measurements to detect water saturation in a man-made test site. The application of our proposed techniques to the measured data was successful.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.151-154
• /
• 2012

본 논문에서는 화상통신의 현실감을 증진시킬 수 있는 화자 간 시선 맞춤 시스템을 제안한다. 제안하는 방법은 Kinect 거리 카메라로부터 입력된 영상에서 화자의 얼굴 영역을 획득하여 화자의 시선이 카메라를 응시하도록 획득한 영역을 변환한 후에 원본 영상과 합성한다. Kinect 거리 카메라에서 획득한 얼굴 영역에는 다양한 형태의 잡음이 많아 미디언 필터와 모폴로지 연산을 통해 얼굴 영역의 잡음을 제거한다. 화자의 위치에 상관 없이 화자가 카메라를 응시하는 영상을 생성하기 위해서 Kinect 가 제공하는 거리 정보를 이용하여 시선 보정 각도와 회전 축을 획득한다. 시선이 보정된 얼굴 영역은 원본 영상에서 존재하지 않는 영역을 포함하고 있기 때문에, 원본 영상의 각 화소를 삼각형 메쉬로 구성한 후 해당 영역을 보간하여 최종적으로 시선이 보정된 영상을 생성한다. 제안하는 방법은 시선 맞춤 영상을 생성하는 데 필수적인 눈과 주변 얼굴 영역만 선택해서 변환하므로 영상의 왜곡이 적고 실시간 처리가 가능하다는 장점이 있다. 또한 카메라와 화자 사이의 거리 정보를 이용해 화자의 위치에 적응적인 시선 맞춤 영상을 생성할 수 있다. 실험을 통해 Intel i5 CPU 를 장착한 PC에서 $320{\times}240$ 크기의 영상을 사용할 경우 초당 약 35 프레임의 보정된 영상을 생성하여 제안하는 방법이 실시간 처리가 가능하다는 것을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.44-50
• /
• 2002

Conventional acoustic echo cancelers using ES(Exponentially weighted Stepsize) algorithm have simple operational configuration and fast convergence speed batter then NLMS algorithm, but they are very weak in external noise because ES algorithm updates filter taps using an average energy reduction rate of room impulse response in specific acoustical condition. So, a new configuration of acoustic echo canceler with stepsize generator and selector is proposed in this thesis. The proposed stepsize generator and selector improve conventional acoustic echo canceler's weakness in external noise and improve the system robustness. The stepsize generator generates additional stepsize value using moving averager, which is the residual noise energy of error signal multiplied by constant ${\gamma}$. The stepsize selector selects the stepsize value that has better performance in an acoustic echo canceler using a coefficient decision factor ${\Delta}_{differ}$ The simulation results show that the proposed algorithm reduces residual error by 5[dB] to 10[dB], improves misadjustment regardless of external noise's SNR. 

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.107-116
• /
• 2010

Smear is a phenomenon that occurs when an extremely strong light source appears in the imaging system with CCD sensor. It occurs due to the signal charge transfer of CCD and appears as bright lines of noise emanating vertically (or horizontally) from the light source. For still images, smear can be reduced by using a mechanical shutter or special drive methods, but these techniques cannot be applied to image sequences. In this paper, we propose a smear removal method that can be applied to imaging systems for not only still images but also image sequences. The proposed method uses the optical black region(OBR) which is a group of pixels located in the boundary of CCD imaging sensors. Although the OBR is not exposed to light, it contains smear information caused by the charge transport. First, noise and the smear signal in the OBR is separated, and noise is removed to correctly estimate smear effect. Then, corrected OBR signal is uniformly subtracted to eliminate smear effect. Also, if saturation is occurred, the current pixel is substituted by weighted summation of neighboring pixels to improve the visual degradation. Experimental results show that the proposed algorithm outperforms the conventional methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.55-59
• /
• 2006

In cellular OFDMA(Orthogonal Frequency Division Multiple Access) systems, each subcarrier may suffer from different amount of interferences from neighbor cells. Suppose that it is possible to accurately estimate inter-cell interferences for each subcarrier, the performance can be considerably improved by applying SINR(Signal to Interference and Noise Ratio) weighting. This paper proposes an inter-cell interference estimation method for cellular OFDMA systems. The proposed method extracts amounts of noise and interferencesby eliminating the channel variation effects of pilot symbols caused by frequency offset, timing offset mobile velocity, and delay spread.

• Journal of Korea Multimedia Society
• /
• v.3 no.4
• /
• pp.347-355
• /
• 2000

This paper presents an adaptive AEC(acoustic echo canceller) based on the wavelet transform using M-channel subband QMF filter banks. The proposed algorithm improves the performance of AEC with a realtime process by a low complexity of wavelet transform filter banks, a subband processing and a orthogonality of wavelet subband filter. Adaptive filter coefficients of each subband are updated using LMS algorithm with a low complexity and a easy realization for a realtime processing and a reduction of hardware cost. For a input signal, a white Gaussian noise and a real speech signal with a environment noises are used for a performance estimation of the proposed algorithm. As a result of computer simulation, the proposed AEC has a low asymptotic error, a low computation complexity and a robust performance.

• Investigative Magnetic Resonance Imaging
• /
• v.4 no.2
• /
• pp.120-127
• /
• 2000

Adaptive template filtering has been proposed recently for enhancement of signal-to-noise ratio without loss of resolution. In the adaptive template filtering, an optimal template among multiple templates is selected, then linear least square error filtering based on the template is applied in vowel by vowel basis. In some magnetic resonance imaging, where the distribution of gray level has relatively small dynamic range, e.g., $T_1$ imaging, however, artificial stair-like artifact is observed at near edges. This is partially due to the edge enhancement effect in such yokels that contain multiple compounds at the boundaries of tissues. The gray levels of these yokels become similar gray levels of near dominant vowels that contain single compound by the adaptive filtering, which enlarges edge discontinuities. In this paper, we propose a technique to eliminate such artifact by identifying those yokels that contain multiple compounds and assigning the largest template for them. Filtered images with the proposed technique show substantial visual enhancement at the edges without degradation of peak signal-to-noise ratio compared to the original adaptive template filtering for both magnetic resonance images and phantom images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1310-1316
• /
• 2021

Recently, with the development of artificial intelligence and IoT technology, the importance of video processing such as object tracking, medical imaging, and object recognition is increasing. In particular, the noise reduction technology used in the preprocessing process demands the ability to effectively remove noise and maintain detailed features as the importance of system images increases. In this paper, we provide a modified weight filter based on pixel matching in an AWGN environment. The proposed algorithm uses a pixel matching method to maintain high-frequency components in which the pixel value of the image changes significantly, detects areas with highly relevant patterns in the peripheral area, and matches pixels required for output calculation. Classify the values. The final output is obtained by calculating the weight according to the similarity and spatial distance between the matching pixels with the center pixel in order to consider the edge component in the filtering process.